I had the privilige to ride a nice Belgian route around Leuven (close to Brussels), hitting some very nasty cobble sections. The WH-7701 wheels held up fine,...

I've got a 75 Paramount track bike with a big ding in the top of the top tube where the handlebar smacked into it. It's not pretty, but doesn't seem to affect...

I have some small splits in the tire in the treaded part that would be against the ground in a hard turn. They're short (longest is 1/4") and parallel with...

My road bike has Look pedals, but the trainers at the gym have SPD style pedals. Has anyone heard of an adaptor that I could put either on my shoes or on the...

I'm building up a roadie on a monocoque carbon frame that has internal shift cable routing. At the points where the cables enter the frame near the cable...

Hi All, I've just recently built up a retro project, and have about 50 miles on the bike. It is a Cinelli Proxima Thron frameset. I first thought it odd when...

I'm piecing a touring bike together and am wondering about the quality/durability of the Cane Creek S2 headsets. Looks like a good price for them. My other...

These are Look pedals from around 1990 or 1991. Does anybody recognize them and know the...

Hey all, I've got some ISIS FSA cranks that included FSA self-extracting cranks bolts in the sealed package. There is a diagram in the instructions on how to...

My local Costco is advertising their use of nitrogen for automobile tire inflation. They say nitrogen is a dry, inert gas used to inflate airplane tires,...

I just got a set of Bontrager race lite wheels and I am having a problem with the rear wheel skewer not holding well. The wheel has shifted over and the...

I just replaced my bottom brachet, and now for some reason, the drive side crank doesn't seem to want to tighten all the way onto the BB. It seems to be amout...

My rear wheel, Mavic CXP-33, 32 spokes, 2K miles, developed some noises. The wheel had a slight wobble. Upon inspection, I discovered that several spokes were...

Project for a cyclo-roamer You will find at the folowing adress a drawing and a prototype of a cyclo-roamer: Vous voudrez bien trouver ci-joint l'adresse...

Greetings, I am currently looking to upgrade the entry level integrated shifter/brakes on my 2005 Trek 4300. I am looking to improve quality and prefer the...

Hi, I want to route wires from a Shimano Flight Deck through the cable holes on an FSA K Wing carbon bar. The one hesitation I have is that I'll have to cut...

I'm rebuilding a 1997 Cannondale (I believe it's a 2.8 frame). The 600 series left crank arm threads are stripped so I'm replacing the bottom bracket and crank...

I'm rebuilding a 1997 Cannondale (I believe it's a 2.8 frame). The 600 series left crank arm threads are stripped so I'm replacing the bottom bracket and crank...

Hello All, Why do I not see any Raleigh road bikes out there. I see many Cannondales, Treks, Specialized. I have an opportunity to get a really good priceon...

My speedo is set for fat tires: 2090 mm for one complete rotation. Today I did a ride that the speedo said was 46 miles - but on slicks that measure only 1965...