I agree. There is no reason for a qualified mechanic of any kind, well maybe a plumber, it is less messy than channel locks, to have an adjustable wrench in...

I recently warped a rear wheel that was true a few weeks ago. Thought I’d true it today with the spoke tension, but found that instead of a single warp point...

Each time I looked in to the Nike shoes for cycling, they were made by DMT and in some cases the sole was branded with "OCLV" carbon fiber but other than that...

I was attempting browse their website today and came across what looks like a test of various aluminum rimmed...

Hi, Does anyone has any experience with Scott Endurance saddle that is mounted in Scott's middle/upper level bikes? I would appreciate any opinion about its...

One of the teeth on the cog that I use the most has worn down after only 2000 miles, causing chain skip. And that cogset replaced one that lasted only five...

"(PeteCresswell)" wrote in message ... Broke my Duo at the rear dropout recently. The LBS...

Threaded headset cups & cones; old french frame (LeJeune, I tink...). Dia of the (bad) cone that fits tight measures 1.190; new cup is 1.182. I could shim or...

Can't believe I did that. Orginally posted question ~2 wks ago but w/o pic. The question is: Is there a problem with this integrated headset bearing...

I just got a screaming deal on a brand new Deda Mag00 stem via Ebay. Why? Is there something about this stem I should know about? Are they prone to breaking?...

Will this setup front index shift properly? Road bike with105 9 speed brake/shifter, 5503 or 5504 road front der, 110/74mm triple crank with 46/36/24...

I have a fixie/freewheel flipflop hub that has a cog and lockring epoxied on. Any way to remove the cog/ring without trashing the threads? TIA Scott

I got a LX crank that was ridden with a loose pedal and consequently destroyed threading. Is there a way to repair this?

As a user of tubular tires, I enjoy the feel and the ride. Generally, they are trouble-free, but upon occaision a puncture has been experienced. I mount and...

I'm interested in those who have tried both the Tacx Cyclespider Prof (T3025), the Topeak Prepstand (with or without the scale/balance) and the Ultimate Pro...

I have a 1985-ish Fuji League that I've converted into a commuting bike. Recently I decided I wanted a lower gear on it, so my local bike store put on a new...

Is it acceptable to run a 3 watt, 6 volt LED headlight with an ordinary 6v 3 watt generator? Do LED's have different requirements than normal incandescent...

Today I went for my first ride with a new crankset. The crank is a "10 speed", and I have a generic 36 tooth "8 speed" inner ring, and a Salsa 48 tooth "9...

Since I started riding again over 10 years ago, I've had many flats, but never one on the front tire until last Sunday. Needless to say I was surprised. I got...

Just got my Surly 1x1 put together with left over parts and a little help from ebay. Replaces a single speed, Surly Cross Check, stolen out of my attached...