Campagnolo's instruction for use states that chains must be immediately replaced when the roller to roller distance across 6 links is 132.60mm. I am...

Does anyone have the IRD 5, 6, 7 sp freewheel measures (Center to center, gear width, and spacer measures) ? IRD gives stack heights which have to include...

Would anyone happen to know the effective TT length on a 54cm Specialized Allez, the steel version from one or two years ago? Thanks

My front wheel is a 32 spoke 3 cross Record hub wheel that I built up using DT Comps 1.8/1.6 double butted spokes with DT alloy nipples. Last Sunday was the...

Hi All, Santa brought me all sorts of goodies, including some rims, hubs, and spokes. One wheel is to be 28 spoke, cross 2. I have only ever done 32 and...

I'm pretty happy with the new Veloce levers I installed to replace the Shimano barends I used to have. I used the HubBub routing, and they seem to work fine...

Group, I can't seem to find a (box quanity) source for the 5mm dia by 14mm long Truss Head (?) type machine screws that are needed for look cleats on Sidi...

Hi, I just repacked my Schimano 105 rear hub for the first time and noticed that it's missing its rubber seals--which should be there according to Schimano's...

Having been in many charity rides, I've seen some very strange bikes in them. But the unicycle seems to be quite dangerous to the other cyclists. It's always...

Hi: I would like to share with you the Trackmap (dynamic map of the GPS track), altigraphy (altitude profile of the route), geo-referenced photos and a...

sorry, i don't have a wide enough screen to follow this thread very well any more, so i'm starting again: Joe Riel wrote: jim beam...

Hi all I have a 9.5mm axle that I need nuts for. It's for a Taiwanese "TOV" costar brake hub. I cannot determine if it's 9.5mm X 24tpi or 9.5mm X 26tpi. I've...

http://www.profile-design.com/2006_product_pages/accesories/acc_converter.html The Profile Threadless from Threaded Stem adapter above seems like the only way...

It's winter in most places. It occured to me that some people may be trying to reach me using email address' that are not current. So, is there a service(free...

Has anyone here tried making the Brunton Liberty Mantleless Lantern into a bicycle headlight? 60 Watts is a lot of...

I have a pair of '05 Crossmax SLs which have thus far been trouble free through maybe 100 hours of riding in desert conditions. I do very little wet-weather...

Assuming that you had to ride a bike across a set of railroad tracks which were at a steep angle to you (i.e. nearly parallel to your direction of travel),...

I'm no athlete - strictly a ride-because-it-feels-good cyclist and...

This is actually for mixing companies for a lift kit to aerobar, but this seemed like a possible conversion use (Road to Mtn bar conversion). All I can find is...

Tadpole 'bent trike with 20" wheel, 36 spoke, two cross, s/s non butted spokes, S/A hub brakes. Every so often I get one of the inboard front spokes broken...