Does anything dissolve paint thinner
On 9/12/2019 3:30 PM, incredulous wrote:
I recall from this forum 10-15 ago that it wasn’t hard to demonstrate that the important dirt about chains is inside not on the chains; and the bad news is that it was difficult or futile to rinse or flush all the wear-causing abrasive grit from plain-bearing surfaces. Which is why some of us lubricate chains with paraffin-oil mixes applied hot. The wax rejects most of the road grit. Chains stay far cleaner, last longer and by some tests, are more efficient. -- - Frank Krygowski |
Does anything dissolve paint thinner
On 9/12/2019 2:30 PM, incredulous wrote:
I recall from this forum 10-15 ago that it wasn’t hard to demonstrate that the important dirt about chains is inside not on the chains; and the bad news is that it was difficult or futile to rinse or flush all the wear-causing abrasive grit from plain-bearing surfaces. Harry Travis Portland OREGON USA +1 excellent summary (except for ultrasound, which is different from other cleaning techniques) -- Andrew Muzi www.yellowjersey.org/ Open every day since 1 April, 1971 |
Does anything dissolve paint thinner
On Thu, 12 Sep 2019 12:30:28 -0700 (PDT), incredulous
wrote: I recall from this forum 10-15 ago that it wasn’t hard to demonstrate that the important dirt about chains is inside not on the chains; and the bad news is that it was difficult or futile to rinse or flush all the wear-causing abrasive grit from plain-bearing surfaces. Harry Travis Portland OREGON USA Possibly true but abrasive damage is also a factor of quantity. A lot of dirt undoubtedly causes more wear than a little dirt. -- cheers, John B. |
Does anything dissolve paint thinner
On Thursday, September 12, 2019 at 2:58:49 PM UTC-7, AMuzi wrote:
On 9/12/2019 2:30 PM, incredulous wrote: I recall from this forum 10-15 ago that it wasn’t hard to demonstrate that the important dirt about chains is inside not on the chains; and the bad news is that it was difficult or futile to rinse or flush all the wear-causing abrasive grit from plain-bearing surfaces. Harry Travis Portland OREGON USA +1 excellent summary (except for ultrasound, which is different from other cleaning techniques) -- Andrew Muzi www.yellowjersey.org/ Open every day since 1 April, 1971 That super heavy detergent that I use - you can put what appears to be a clean chain in it, let it sit for 10 minutes, shake the chain and the water/detergent blackens from the residue that is washed out of the interior bearing surfaces of the links. The only negative I can see is that it dulls the finish on wheels, so you always have to pull the chain to clean it. Easy enough with quick links. |
All times are GMT +1. The time now is 05:45 PM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
CycleBanter.com