| Page 1 of 2 | 1 | 2 |
|
|
|
World's Fastest Production Bike Terrorizes
To see pictures of the bike below, go to :
http://www.bikeroute.com/Recumbents/...es/000089.html 53 year old George Reynolds us blowing off the Cat 1 and 2 road bikes again. In the Boston area on Saturday 8/24/05, he and his 190 pound frame powered the rolling (10-12% grades), ten mile Charlie Baker Time Trial (official http://northeastbicycleclub.org/home...lts-08242005-c lub-championship-2results) at an average speed of 28.34 miles an hour. Hitting speeds well in excess of 40 mile an hour on the flats, he did all of this on the recumbent bicycle his company, Reynolds Weld Lab, manufactures for sale!. Called a Z-Bone, the bike features a nose cone fairing, a tail fairing, rear suspension, a carbon fiber seat and two 700 x 28*wheelsets.. Learn more about it at: http://reynoldsweldlabs.com -- 54% of New York City households do not own cars M A R T I N K R I E G : "Awake Again" Author http://www.bikeroute.com/AwakeAgain Bent Since '83, Car Free Since '89, '79 & '86 TransAms******** Coma, Paralysis, Clinical Death Survivor* Can You Change it with Love?* N A T I O N A L B I C Y C L E G R E E N W A Y |
World's Fastest Production Bike Terrorizes
I can vouch for that, I was doing 25-27mph and he passed me like I was
sitting still, it needs a nicer fairing tho :) "Cycle America" wrote in message ... To see pictures of the bike below, go to : http://www.bikeroute.com/Recumbents/...es/000089.html 53 year old George Reynolds us blowing off the Cat 1 and 2 road bikes again. In the Boston area on Saturday 8/24/05, he and his 190 pound frame powered the rolling (10-12% grades), ten mile Charlie Baker Time Trial (official http://northeastbicycleclub.org/home...lts-08242005-c lub-championship-2results) at an average speed of 28.34 miles an hour. Hitting speeds well in excess of 40 mile an hour on the flats, he did all of this on the recumbent bicycle his company, Reynolds Weld Lab, manufactures for sale!. Called a Z-Bone, the bike features a nose cone fairing, a tail fairing, rear suspension, a carbon fiber seat and two 700 x 28 wheelsets.. Learn more about it at: http://reynoldsweldlabs.com -- 54% of New York City households do not own cars M A R T I N K R I E G : "Awake Again" Author http://www.bikeroute.com/AwakeAgain Bent Since '83, Car Free Since '89, '79 & '86 TransAms Coma, Paralysis, Clinical Death Survivor Can You Change it with Love? N A T I O N A L B I C Y C L E G R E E N W A Y |
World's Fastest Production Bike Terrorizes
M A R T I N K R I E G wrote: To see pictures of the bike below, go to : http://www.bikeroute.com/Recumbents/...es/000089.html 53 year old George Reynolds us blowing off the Cat 1 and 2 road bikes again. In the Boston area on Saturday 8/24/05, he and his 190 pound frame powered the rolling (10-12% grades), ten mile Charlie Baker Time Trial (official http://northeastbicycleclub.org/home...lts-08242005-c lub-championship-2results) at an average speed of 28.34 miles an hour. Hitting speeds well in excess of 40 mile an hour on the flats, he did all of this on the recumbent bicycle his company, Reynolds Weld Lab, manufactures for sale!. Called a Z-Bone, the bike features a nose cone fairing, a tail fairing, rear suspension, a carbon fiber seat and two 700 x 28 wheelsets..[..] Is the "Z-Bone" faster than the Velokraft NoCom [Fastest Stock Bike in the Known Universe], or the similar splitter plate lowracers the best European HPV racers are now riding? Highly doubtful. Too bad "Johnny NoCom" is retired. -- Tom Sherman - Fox River Valley |
World's Fastest Production Bike Terrorizes
"Sunset Lowracer [TM] Fanatic" wrote in message oups.com... M A R T I N K R I E G wrote: To see pictures of the bike below, go to : http://www.bikeroute.com/Recumbents/...es/000089.html 53 year old George Reynolds us blowing off the Cat 1 and 2 road bikes again. In the Boston area on Saturday 8/24/05, he and his 190 pound frame powered the rolling (10-12% grades), ten mile Charlie Baker Time Trial (official http://northeastbicycleclub.org/home...lts-08242005-c lub-championship-2results) at an average speed of 28.34 miles an hour. Hitting speeds well in excess of 40 mile an hour on the flats, he did all of this on the recumbent bicycle his company, Reynolds Weld Lab, manufactures for sale!. Called a Z-Bone, the bike features a nose cone fairing, a tail fairing, rear suspension, a carbon fiber seat and two 700 x 28 wheelsets..[..] Is the "Z-Bone" faster than the Velokraft NoCom [Fastest Stock Bike in the Known Universe], or the similar splitter plate lowracers the best European HPV racers are now riding? Highly doubtful. Too bad "Johnny NoCom" is retired. -- Tom Sherman - Fox River Valley Martin has tendency to exaggerate a wee bit and to hype his sponsor's bikes from time to time. I don't know if Reynolds is a sponsor or not, but Martin has a history of what many have called spamming the newsgroup in the form of news bulletins. In any case Martin is making the case that the Z-Bone is the World's Fastest Production Bike based on a 9 mile time trial put on by the Northeast Bicycle Club and further states that Reynolds was "blowing off" Cat 1 & 2 road bike again, and actually terrorizing them in the process. The facts appear to be that Reynolds, in what is referred to as a fully faired recumbent, beat the closest road bike by less than three tenths of a second average speed. I don't think you can claim "World's Fastest Production Bike Terrorizes" based on this one club time trial. And I doubt the road bike rider felt either terrorized or blown off. I don't believe Johnnie NoCom was getting paid for his boasting. Martin may be. |
World's Fastest Production Bike Terrorizes
HHS wrote: Martin has tendency to exaggerate a wee bit and to hype his sponsor's bikes from time to time. I don't know if Reynolds is a sponsor or not, but Martin has a history of what many have called spamming the newsgroup in the form of news bulletins. Martin Krieg posts used to have the benefit of putting knots in Cletus Lee's knickers. ... I don't believe Johnnie NoCom was getting paid for his boasting.... Of course not. -- Tom Sherman - Fox River Valley |
World's Fastest Production Bike Terrorizes..even in galaxies far away
"Sunset Lowracer [TM] Fanatic" wrote in message oups.com... M A R T I N K R I E G wrote: To see pictures of the bike below, go to : http://www.bikeroute.com/Recumbents/...es/000089.html 53 year old George Reynolds us blowing off the Cat 1 and 2 road bikes again. In the Boston area on Saturday 8/24/05, he and his 190 pound frame powered the rolling (10-12% grades), ten mile Charlie Baker Time Trial (official http://northeastbicycleclub.org/home...lts-08242005-c lub-championship-2results) at an average speed of 28.34 miles an hour. Hitting speeds well in excess of 40 mile an hour on the flats, he did all of this on the recumbent bicycle his company, Reynolds Weld Lab, manufactures for sale!. Called a Z-Bone, the bike features a nose cone fairing, a tail fairing, rear suspension, a carbon fiber seat and two 700 x 28 wheelsets..[..] Is the "Z-Bone" faster than the Velokraft NoCom [Fastest Stock Bike in the Known Universe], or the similar splitter plate lowracers the best European HPV racers are now riding? Highly doubtful. Too bad "Johnny NoCom" is retired. -- Tom Sherman - Fox River Valley Follow the link and scroll down the thread. http://www.bentrideronline.com/messa...ad.php?t=12258 ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! 100,000 Newsgroups ---= East/West-Coast Server Farms - Total Privacy via Encryption =--- |
World's Fastest Production Bike Terrorizes..even in galaxies far away
gotbent wrote: Follow the link and scroll down the thread. http://www.bentrideronline.com/messa...ad.php?t=12258 Link is dead. -- Tom Sherman - Fox River Valley |
World's Fastest Production Bike Terrorizes..even in galaxies far away
"Sunset Lowracer [TM] Fanatic" wrote in message oups.com... gotbent wrote: Follow the link and scroll down the thread. http://www.bentrideronline.com/messa...ad.php?t=12258 Link is dead. -- Tom Sherman - Fox River Valley Bentrideronline at the moment is dead, at least the message board is and i can only get part of the opening screen up |
World's Fastest Production Bike Terrorizes..even in galaxies far away
"Mark Leuck" wrote in message ... "Sunset Lowracer [TM] Fanatic" wrote in message oups.com... gotbent wrote: Follow the link and scroll down the thread. http://www.bentrideronline.com/messa...ad.php?t=12258 Link is dead. -- Tom Sherman - Fox River Valley Bentrideronline at the moment is dead, at least the message board is and i can only get part of the opening screen up BROL seems to have gotten things sorted out and is back on the air so the posted link to the world's fasted production bent is working. ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups ----= East and West-Coast Server Farms - Total Privacy via Encryption =---- |
World's Fastest Production Bike Terrorizes..even in galaxies far away
"gotbent" wrote in message ... "Mark Leuck" wrote in message ... "Sunset Lowracer [TM] Fanatic" wrote in message oups.com... gotbent wrote: Follow the link and scroll down the thread. http://www.bentrideronline.com/messa...ad.php?t=12258 Link is dead. -- Tom Sherman - Fox River Valley Bentrideronline at the moment is dead, at least the message board is and i can only get part of the opening screen up BROL seems to have gotten things sorted out and is back on the air so the posted link to the world's fasted production bent is working. The thread that link goes to is about an important breakthrough in cycling eyewear. Maybe you should sort of sum up for us whatever it is that's being claimed for the world fastest bent. |
| All times are GMT +1. The time now is 05:29 AM. |
|
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
CycleBanter.com