CycleBanter.com

CycleBanter.com (http://www.cyclebanter.com/index.php)
-   Mountain Biking (http://www.cyclebanter.com/forumdisplay.php?f=10)
-   -   chain slippage (http://www.cyclebanter.com/showthread.php?t=81243)

Jeremy Watts January 23rd 05 04:53 PM

chain slippage
 
Hi,

I've got a 'Carrera Kraken' mountain bike and i keep getting this problem
where the chain seems to 'slip' around the chain set when in certain gear
combinations.

As I say when in 1 or 3 on the front gears it doesnt do it, but put it in 2
on the front and apply any pressure to the pedals and the chain seems to
slip right round the teeth on the gear wheel and so not provide any drive to
the wheels.

Someone has said that this is due to worn gear teeth, but i dont fully buy
that because they dont seem worn to me, and its been doing it a while and
was doing it occasionally when the bike was new.

Any idea why this happens?


Thanks
Jeremy



tcmedara January 23rd 05 05:06 PM

Jeremy Watts wrote:
Hi,

I've got a 'Carrera Kraken' mountain bike and i keep getting this
problem where the chain seems to 'slip' around the chain set when in
certain gear combinations.

As I say when in 1 or 3 on the front gears it doesnt do it, but put
it in 2 on the front and apply any pressure to the pedals and the
chain seems to slip right round the teeth on the gear wheel and so
not provide any drive to the wheels.

Someone has said that this is due to worn gear teeth, but i dont
fully buy that because they dont seem worn to me, and its been doing
it a while and was doing it occasionally when the bike was new.

Any idea why this happens?


Thanks
Jeremy


There are really a couple of potential problems, but your symptoms point
primarily to worn components. Whoever told you it might be the chainring
was giving good advice. What they also failed to tell you was that in
addition to needing a new middle ring, you may also need a new chain and
cassette since they are likely all worn to match the wear/elongation of the
chain. . Drivetrains, while pretty durable in general, need to be viewed as
consumable items. However if you change out your chain before it gets too
bad, you can really extend the life of the rings and the cassette. The only
other thing that comes to mind is a possible bent tooth on the ring itself.
The fact that it happened when the bike lends some weight to that
possibility. Really impossible to tell without actually seeing the rings
and checking the chain.

How long have you been riding with this particular drive train? Do you keep
it clean and lubed? If you're unclear what the problem is or don't
understand what might be causing the problem, your best bet is to bring in
to your local LBS and let them have a look.

Tom



[email protected] January 23rd 05 05:08 PM


Jeremy Watts wrote:
Hi,

I've got a 'Carrera Kraken' mountain bike and i keep getting this

problem
where the chain seems to 'slip' around the chain set when in certain

gear
combinations.

As I say when in 1 or 3 on the front gears it doesnt do it, but put

it in 2
on the front and apply any pressure to the pedals and the chain seems

to
slip right round the teeth on the gear wheel and so not provide any

drive to
the wheels.

Someone has said that this is due to worn gear teeth, but i dont

fully buy
that because they dont seem worn to me, and its been doing it a while

and
was doing it occasionally when the bike was new.

Any idea why this happens?


Thanks


Replace your middle chain ring. Mine did the same thing, and didn't
look too worn.
Jeremy



D T W .../\\... January 23rd 05 06:45 PM

"Jeremy Watts" wrote in message
...
Hi,

I've got a 'Carrera Kraken' mountain bike and i keep getting this problem
where the chain seems to 'slip' around the chain set when in certain gear
combinations.

As I say when in 1 or 3 on the front gears it doesnt do it, but put it in

2
on the front and apply any pressure to the pedals and the chain seems to
slip right round the teeth on the gear wheel and so not provide any drive

to
the wheels.

Someone has said that this is due to worn gear teeth, but i dont fully buy
that because they dont seem worn to me, and its been doing it a while and
was doing it occasionally when the bike was new.

Any idea why this happens?

Thanks
Jeremy




http://www.sheldonbrown.com/derailer....html#skipping

--
DTW .../\.../\.../\...

I've spent most of my money on mountain biking and windsurfing.
The rest, I've just wasted.




[email protected] February 3rd 05 10:20 PM

Change the chainrings,chain,and cassette and no more
slip silly.



All times are GMT +1. The time now is 04:12 AM.
Home - Home - Home - Home - Home

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
CycleBanter.com