On Sun, 8 Jan 2017 07:42:55 -0800 (PST),
DATAKOLL MARINE RESEARCH wrote:
On Sunday, January 8, 2017 at 10:38:15 AM UTC-5, Sir Ridesalot wrote:
On Saturday, January 7, 2017 at 9:33:31 PM UTC-5, Theodore Heise wrote:
Hi all,

I have an early 1990s Rodriguez tandem with a rear bottom bracket
in serious need of overhaul. The cranks flop severely.

I've pulled the cranks and the lock ring on the left side, but the
adjustable cup won't come out. It turns about a quarter turn, but
then gets too stiff to turn further. It has no flats for a wrench
instead having holes for turning with a pin spanner--so I'm unable
to put a lot of force on it.

I've soaked it with WD40, but still no joy. Any advice for me?

If your unit is a cup rather than a cartridge then tghis do it
yourself tool from Sheldon Brown (RIP) works wonders.

http://sheldonbrown.com/tooltips/bbcups.html

It's towards the bottom of the page under "Fixed-Cup Tools".


https://www.google.com/#q=removing%2...%3Ayoutube.com

Thanks guys, but I need to get the adjustable cup off before I
could use Sheldon's tool on the fixed cup.

--
Ted Heise Bloomington, IN, USA