View Single Post
  #108  
Old May 3rd 17, 01:30 AM posted to rec.bicycles.tech
John B Slocomb
external usenet poster
 
Posts: 356
Default torque wrench issues

On Tue, 2 May 2017 18:48:54 +0100, "Ian Field"
wrote:



"John B Slocomb" wrote in message
.. .
On Mon, 1 May 2017 21:14:22 +0100, "Ian Field"
wrote:



wrote in message
...
On Mon, 1 May 2017 07:06:39 -0700 (PDT), wrote:



Whenever you are working with galvanized steel it is important that
you take the necessary steps when prepping the metal before welding.
If you have properly prepped your metal before welding, you will help
reduce your exposure to zinc oxide fumes.

The usually suggested preparation for welding or brazing galvanized
materials is to grind all the galvanizing off!

Welding a joint with zinc still on the area would weaken the weld but
who
am I to suggest that you're right?

Smokers have very high amounts of cadmium in their bodies. If you've
smoked for 50 years you probably have the maximum allowable amount of
cadmium in your body. You can get cadmium in your body by touching it.
The
amount into your plasma is as high as 0.07%. The half-life of cadmium in
the body is about 10 years if memory serves.

But both zinc and cadmium would normally only accumulate to dangerous
levels at a rate that wouldn't harm you until long after you're dead
unless you're a smoker.
Or a careless welder.
Brazing spelter containing cadmium can make you sicker than a dog in
short order if you are breathing the fumes - as can the fumes from
welding galvanized steel. It only takes a few minutes to get you
wretching and puking and aching to the point you almost wish you
could die.

"galvanised" is galvanic protection - which can include any of several
toxic
heavy metals.


While yes, galvanizing is a galvanic protection if you go into a store
and ask for "galvanized iron" you get zinc coated steel.

Some people here seem to think it can only mean zinc.


No, "galvanized", in common U.S. usage, does mean zinc coated.


Etymology is far too complex for Americans to cope with.


Perhaps so. And quite obviously logic is not a subject that the
"British" are familiar with.

I use "British" with some trepidation as I have met with a large
number of folks from the "tiny island nation" and not a single one,
when asked, has ever identified themselves as "Oh, I'm British".
Ads
 

Home - Home - Home - Home - Home