On 8/18/2019 9:11 PM, AK wrote:
On Sunday, August 18, 2019 at 8:25:40 PM UTC-5, John B. Slocomb wrote:
On Sun, 18 Aug 2019 17:35:54 -0700 (PDT), AK
wrote:
The opening in the hex screw that holds the rear brake cable has become much looser than it used to be. What is the name of the part so I can order another one? (Hopefully they have some made of harder steel.)
https://imgur.com/a/JT76Qog
It is simply a clamp bolt and the question is whether it holds the
brake cable tightly when it is tightened, If it does than I shouldn't
worry about it.
As the bolt should be clamping the cable between a flange or washer on
the bolt and the brake arm itself. When it is tightened it shouldn't
move at all.
Your picture looks a bit strange, but maybe it is the perspective. See
https://sheldonbrown.com/canti-direct.htmlto
from a slightly different angle.
--
Cheers,
John B.
If that clamp bolt gets enlarged much more so my hex wrench slips, it will definitely be a big problem.
I can't view your image, nor Mr Slocumb's but on most linear
(V) brakes, the cable anchor is just an m6x1.0 bolt.
For a cantilever carrier or arm anchor or a sidepull/
dual-pivot caliper it likely has to be a bicycle part.
--
Andrew Muzi
www.yellowjersey.org/
Open every day since 1 April, 1971