On Monday, November 13, 2017 at 10:17:14 AM UTC-8, Joerg wrote:
On 2017-11-12 18:13, John B. wrote:
On Sun, 12 Nov 2017 07:38:50 -0800, Joerg
wrote:

On 2017-11-11 18:13, John B. wrote:
On Sat, 11 Nov 2017 10:39:42 -0800, Joerg
wrote:

On 2017-11-11 07:51, jbeattie wrote:


[...]

... Avid uses a
higher torque spec. 5nm should be plenty to keep your stem and
headset tight, but probably not in Cameron Park.


It does but only if I smear some grit-laden toothpaste on the fork tube
before sliding on the stem. Not the paste for electric brushing but the
regular paste. What I am saying is that 5nm feels like it's about to
strip the aluminum threads out.

I think I'd buy a torque meter. And use it :-)


Trying to be a minimalist I have a makeshift one that was ridiculed here
but when compared to pro gear is more accurate than anything from a
hardware sto A digital suitcase scale. I can torque a screw to
precisely 44 in-lbs. Not 42 or 46 but exactly 44. Try that with one of
those ratchet gizmos.


Yup, you can use a scale and a carefully measured length wrench but it
is hardly necessary as torque limits always seem to be quite liberal.
Shimano specifies 2 - 4 Nm (18 - 36 "lbs) for brake disc attaching
bolts. No need to get right down to the nth degree.


I know. Just mentioned it because there are people here who seriously
think the suitcase scale method is inaccurate.

No, it's just dopey -- it's like using a nail and a hammer to remove a chain rivet . . . oh wait. Never mind.

-- Jay Beattie.