I need to know how and where to install the spacers I was told I needed
because I'm using the 11-21 cassette. So far all I know is they/it need
to be installed on the chain ring side of the bottom bracket. I removed
the cranks from the bottom bracket and the bottom bracket from the
frame. I recieved two spacers one is about 1mm and the other is 2.5mm
the diameter is too small to fit over the threaded area of the chain
ring side so I don't have any directions to do this. At this time all I
can think is these might be the wrong size(diameter) for the Italian
threaded frame. Any one done a Campy build and used these. Tom Gaul



--
2003 Coppi KSC/Record
1985 C'dale R900 C Record
1984 Lotus Prestige Nouvo Record

--------------------------
Posted via cyclingforums.com
http://www.cyclingforums.com