On 2017-11-13 15:18, AMuzi wrote:
On 11/13/2017 5:07 PM, jbeattie wrote:
On Monday, November 13, 2017 at 10:17:14 AM UTC-8, Joerg wrote:
On 2017-11-12 18:13, John B. wrote:
On Sun, 12 Nov 2017 07:38:50 -0800, Joerg
wrote:
On 2017-11-11 18:13, John B. wrote:
On Sat, 11 Nov 2017 10:39:42 -0800, Joerg
wrote:
On 2017-11-11 07:51, jbeattie wrote:
[...]
... Avid uses a
higher torque spec. 5nm should be plenty to keep your stem and
headset tight, but probably not in Cameron Park.
It does but only if I smear some grit-laden toothpaste on the
fork tube
before sliding on the stem. Not the paste for electric brushing
but the
regular paste. What I am saying is that 5nm feels like it's about to
strip the aluminum threads out.
I think I'd buy a torque meter. And use it :-)
Trying to be a minimalist I have a makeshift one that was ridiculed
here
but when compared to pro gear is more accurate than anything from a
hardware sto A digital suitcase scale. I can torque a screw to
precisely 44 in-lbs. Not 42 or 46 but exactly 44. Try that with one of
those ratchet gizmos.
Yup, you can use a scale and a carefully measured length wrench but it
is hardly necessary as torque limits always seem to be quite liberal.
Shimano specifies 2 - 4 Nm (18 - 36 "lbs) for brake disc attaching
bolts. No need to get right down to the nth degree.
I know. Just mentioned it because there are people here who seriously
think the suitcase scale method is inaccurate.
No, it's just dopey -- it's like using a nail and a hammer to remove a
chain rivet . . . oh wait. Never mind.
-- Jay Beattie.
eh what do we know? Never broke a front axle. Ever. You?
My dad topped that. He broke a supposedly sturdy steel frame in half on
a fast ride. Ok, the area had just been heavily bombed during WW-II so
the ride wasn't exactly smooth.
So Andrew, are the axles in the solid-version Shimano HB-TX500 hubs
sturdy in your experience? Then I could buy one and pilfer the axle. In
contrast to the old MTB this one has full suspension (the old one has
none at all). That muffles the blows.
--
Regards, Joerg
http://www.analogconsultants.com/