On Tuesday, September 10, 2019 at 5:39:24 PM UTC-5, Tom Kunich wrote:
On Sunday, September 8, 2019 at 2:17:40 PM UTC-7, AMuzi wrote:
On 9/8/2019 3:13 PM, Sir Ridesalot wrote:
On Sunday, 8 September 2019 10:35:43 UTC-4, AMuzi wrote:
On 9/7/2019 3:00 PM, AK wrote:
I recently had my rear derailleur replaced along with new shifters on a 18 speed mountain bike.
Shifting in the lower gears is smooth and there is no noise when pedaling.
I can shift smoothly into all gears however, there is a "clicking" sound when I am in the upper gears.
The bike tech who did the work said he could not find a seven speed shifter and installed an eight speed shifter and told me he would make adjustments so it would work.
I have been told this.
"It is a problem, but can be fixed by also replacing the freewheel, but I definitely wouldn't be paying for any service from a tech who didn't know this would be a problem."
https://imgur.com/a/xF73i91
https://imgur.com/a/5VB6gat
The 8 shifter is compatible.
Common problems include cable/casing/ferrule issues and rear
changer misalignment.
It ought to shift well and quietly with all new equipment.
This has a new seven chain, new FW and new cable/casing right?
Since when is an 8-speed shifter compatible with a 6-speed cassette or freewheel?
Cheers
Yikes. You're right. I missed that.
If it's still a SIX freewheel, there's no way that shifter
could work.
And by the way, WTF? Six shifters are cheap and plentiful.
As are Sevens.
--
Andrew Muzi
www.yellowjersey.org/
Open every day since 1 April, 1971
Didn't 6,7 and 8 all have the same spacing? So that you could use a 8 spd shifter on a 6 speed? I would turn my daughter's 6 speed downtube shifter to friction and let her shift the 8 until I found some brifters.
I know the bike shop owner will get my problem fixed.
He genuinely wants to fix my problem.
I sent a message to the bike shop owner about a new development.
He installed an 8 speed indexed shifter.
Just throwing this out but..
Maybe he was distracted when he did the work, but installing an 8-speed shifter on a bike with a 6 speed freewheel sounds like a pretty big screw up.
I won't be leaving his shop before thoroughly testing the bike.
I have learned a lot and I appreciate all the help from this group.
Andy