On 20/03/18 14:34, jbeattie wrote:
On Monday, March 19, 2018 at 5:33:17 PM UTC-7, James wrote:
On 20/03/18 07:43, Joerg wrote:

I get around 5000mi out of pedals and it doesn't seem to matter
much what their price was. Then the bearings are gone. Similar
with bottom brackets. I have always lived in or near hilly
terrain which probably doesn't help.

My preferences are big MTB pedals, both on the MTB and on the
road bike. No clips of any kind.

My Look Keo 2 Max pedals have done probably 50,000km. I think they
are about stuffed. $100 - $150 a pair. I ride plenty of hills and
I don't have little gears. I have inspected the internals once or
twice. The grease is always as new. IOW the seals have not let
anything of note pass.

Maybe it is your mountain lions that kill pedals?


Too bad they are not big platform MTB pedals.

IIRC, the last pair of those I bought were on sale $59 USD. They're
often on sale at Western Bikeworks for some reason.

These are only $49, but I'm not clear on what makes them the limited
edition.
https://www.performancebike.com/Prod...s%20&%20Frames

I actually bought a pair of those for the Synapse, and they work
fine.


I did mung a pair of the original Keos -- the release mech on one
pedal is all screwed up, and I haven't tried to fix it because I
moved to the wider platform -- and it may have to do with excessive
wear of a non-repairable plastic part. My first pair of Keo Max fell
apart. The body pulled off the spindle. I got those warrantied by
the shop and didn't have the problem again. It seemed to be a one-off
problem.

My work-horse commuter pedals are SPDs. I ride them in rain or snow
half the year, open the pedal, and the grease is pristine. The
labyrinth seals are really effective. The release mechanism gets
sloppy before the bearings -- at least on the el cheapo M525s.



No mountain lions where you are?

--
JS