View Single Post
  #5  
Old June 1st 11, 02:23 PM posted to aus.bicycle
Travis
external usenet poster
 
Posts: 231
Default Bursting tyres with heavy loading

On Jun 1, 9:11*pm, terryc wrote:
Travis wrote:
The bike is a somewhat heavy one and I weigh about 105kg.


Today my brand new rear tyre and/or tube burst.
This tyre is a 1.25" x 26" thin (ish) mountain bike tyre.


First of all, is it more likely to be the tyre or the tube which is
responsible for a popping tyre?


Tyre doesn't match rim or you didn't align it evenly.
FWIW, i found thornproof tyres a complete waste of money. They all
eventually split along the rim. heavy loads and a very stiff tyre. OTOH,
thornproof tubes are fantastic.

100psi is the "Max PSI" according to Torpedo7. Should I inflate it
less than that? How much less?


If the tyre popped off, then it is a mismatch of tyre to rim. you need
to try different tyres and/or rims(worst case).

No recommendations as to brand as all I ever used were yumcha .


It didn't pop off the rim, it just instantaneously deflated with a
bang, but remained in place. I've since found a hole in the sidewall
which corresponds to the place where it burst and then burst again
after I patched it and pumped it up again!

Travis
Ads
 

Home - Home - Home - Home - Home