View Single Post
  #31  
Old November 14th 17, 06:33 AM posted to rec.bicycles.tech
John B.[_3_]
external usenet poster
 
Posts: 5,697
Default Does anyone know PM-PM-F/R203 adapters

On Mon, 13 Nov 2017 16:56:07 -0800 (PST), jbeattie
wrote:

On Monday, November 13, 2017 at 3:18:45 PM UTC-8, AMuzi wrote:
On 11/13/2017 5:07 PM, jbeattie wrote:
On Monday, November 13, 2017 at 10:17:14 AM UTC-8, Joerg wrote:
On 2017-11-12 18:13, John B. wrote:
On Sun, 12 Nov 2017 07:38:50 -0800, Joerg
wrote:

On 2017-11-11 18:13, John B. wrote:
On Sat, 11 Nov 2017 10:39:42 -0800, Joerg
wrote:

On 2017-11-11 07:51, jbeattie wrote:


[...]

... Avid uses a
higher torque spec. 5nm should be plenty to keep your stem and
headset tight, but probably not in Cameron Park.


It does but only if I smear some grit-laden toothpaste on the fork tube
before sliding on the stem. Not the paste for electric brushing but the
regular paste. What I am saying is that 5nm feels like it's about to
strip the aluminum threads out.

I think I'd buy a torque meter. And use it :-)


Trying to be a minimalist I have a makeshift one that was ridiculed here
but when compared to pro gear is more accurate than anything from a
hardware sto A digital suitcase scale. I can torque a screw to
precisely 44 in-lbs. Not 42 or 46 but exactly 44. Try that with one of
those ratchet gizmos.


Yup, you can use a scale and a carefully measured length wrench but it
is hardly necessary as torque limits always seem to be quite liberal.
Shimano specifies 2 - 4 Nm (18 - 36 "lbs) for brake disc attaching
bolts. No need to get right down to the nth degree.


I know. Just mentioned it because there are people here who seriously
think the suitcase scale method is inaccurate.

No, it's just dopey -- it's like using a nail and a hammer to remove a chain rivet . . . oh wait. Never mind.

-- Jay Beattie.


eh what do we know? Never broke a front axle. Ever. You?


Yes, but only because it melted while going 140mph down a volcano in 125 degree heat here in Portland. My tire also caught fire. The guy in front of me lost his brake and couldn't stop. It was lucky he had his drag-chute. http://www.gagnesports.com/wp-conten...chute-bike.jpg Otherwise, he would have crashed.

I ALWAYS ride with a drag-chute! It's hooked up to a release mechanism in my rear pannier -- in the pocket next to the heart-lung machine. I never take chances, and that's why I won't ride on the road . . . ever. It's too dangerous.

-- Jay Beattie.


At the speeds you ride I'd think that a zero-zero ejection system
would be superior and being zero speed and zero altitude it could also
be used to avoid the occasional harassing auto.
--
Cheers,

John B.

Ads
 

Home - Home - Home - Home - Home