On Tue, 24 Oct 2017 11:47:12 -0700, Joerg
wrote:

On 2017-10-24 07:27, wrote:
On Tuesday, October 24, 2017 at 2:19:48 AM UTC-7, John B. wrote:
On Mon, 23 Oct 2017 10:09:20 -0700, Jeff Liebermann
wrote:

On Mon, 23 Oct 2017 12:48:29 +0700, John B.
wrote:

On Sun, 22 Oct 2017 20:51:15 -0700, Jeff Liebermann
wrote:

On Mon, 23 Oct 2017 07:02:08 +0700, John B.
wrote:

But re disc brake cooling F1 car brakes appear to work with
the discs red hot. In the 1,000 degree (F) range. And they
use Carbon Fiber discs too :-) And everyone knows that CF
is better.

"Thermal Conductivity of Carbon Fiber, and other Carbon
Based Materials"
http://www.christinedemerchant.com/carbon_characteristics_heat_conductivity.html


"So...Is Carbon Fiber a good heat conductor?
As usual the answer is "it depends." The short answer is NO
not when regular carbon fiber is made up in regular epoxy and
expected to conduct heat across the thickness. IF a highly
carbonized pan fiber with graphite or diamond added, is
measured for heat transmission in the length of the fiber it
is very good and can rival and exceed copper."

On the other hand, they seem to work pretty well :-) See
https://www.youtube.com/watch?v=h5JcHAEmIYM for a visual
indication of heat dissipation. :-)

Impressive. I'll assume it's a carbon-carbon rotor, since all F1
cars seem to using them.

Undoubtedly so. But if the advantage of "carbon" bikes can be
extolled that a carbon-carbon frame must have twice the bragging
rights :-)


http://www.racecar-engineering.com/technology-explained/f1-2014-explained-brake-systems/


(4 pages)
"A typical road car uses a cast iron brake disc with an organic
brake pad. In an F1 car, though, the same material is used for
both disc and pad, and this material is known as carbon-carbon -
a significantly different material to the carbon-fibre
composites used in the rest of the car" In other words, the F1
brakes are NOT made from CF.

Some detail on Formula 1 brakes:
https://www.youtube.com/watch?v=ev6XTdlKElw

Fun destroying brakes:
https://www.youtube.com/watch?v=KslGsXMgmqg The brake starting
at 4:45 sure looks like CF but I'm not sure.

Maybe twin disk brakes would be easier?
http://nuovafaor.it//public/prodotto/75/nccrop/DOPPIO_FRENO_CROSS_ENDURO.jpg


https://i.ytimg.com/vi/Pvwj-WWlKkg/maxresdefault.jpg
https://gzmyu4ma9b-flywheel.netdna-ssl.com/wp-content/uploads/2011/09/Gatorbrake-dual-hydraulic-front-disc-brakes-carbon-rotors01.jpg


https://lh4.googleusercontent.com/-cDfAFWrGR6Q/VHKPsm-f6YI/AAAAAAAAX10/2FCyj87xs0g/s640/14%2520-%25201.jpg
https://www.minibikecraze.co.uk/wp-content/uploads/bs0978.jpg
https://endless-sphere.com/forums/viewtopic.php?f=28&t=56268

Given the coefficient of friction between a 1.25" wide rubber tire
(32mm) and a wet road probably dragging the feet will work. :-)

Joerg's experience is with full suspension MTB's. These things are
incredibly heavy and long wheelbased. He has his judgement of disks
and it is no doubt quite accurate for his experience and riding.

I have disks on a much lighter and shorter wheelbased bike. I know
the failings up close and personal. I simply cannot imagine WHY a
person would want a more complicated system than that offered by the
Campy Skeleton brakes.


The reason can be summed up in one word: Rain :-)

But last Sunday I started out my "weekend" ride in the rain. It had
been raining nearly all night and the roads had a lot of water on them
- note we have been having floods here in Bangkok lately - but it
appeared that the rain was ending so off I went.

Unfortunately my weather forecasting facility wasn't working very well
and I rode 20 Km of a 30 Km ride in light rain and flooded roads in
many places. I was splashing through water in some places and cars
were splashing through (and splashing me) in others.

Of course, Sunday is much lighter traffic then on work days but still,
Bangkok is rated as one of the cities with the most chaotic traffic
in the world, and I did have to stop suddenly several time, on flooded
roads with wet wheels and brakes.

My brakes worked just as they do in the dry. Back brake stops me
somewhat slowly and front brake stops rather suddenly, both brakes
together provides best stopping. No long wait after grabbing a brake
lever although I did think of you with your stopping problems and I
have the feeling that the brake lever pressure might be a tiny bit
more to stop in the rain but if it was it was so little that it
couldn't be quantified.

But of course I am using quality brake pads. Why it costs me US$12.12
a wheel just for pads alone.... but they do last a year or more.
--
Cheers,

John B.