View Single Post
  #10  
Old May 16th 08, 09:19 PM posted to rec.bicycles.tech
Lou Holtman[_2_]
external usenet poster
 
Posts: 161
Default any downside to Wippermann Connex link?

M-gineering wrote:
Lou Holtman wrote:


Wipperman Connex links are fine. Never had any problems with them and
I'm using them for almost 10 years on my road bikes. They are easier
to open then the SRAM links and are better made IMO. Only downside?
They are more expensive when you buy them separately.

Lou


I've just thrown away a Connex link as the pin wasn't riveted square
with the outer plate. If used I can imagine it would have been the weak
link. Other than that my experiences with them are fine. They don't open
as easily as SRAM links when flopping about in a carboot (only of a
concern if you clean your chain ). Look for the shifting chamfer on
the linkplates to install them the right way up



My experience with the SRAM goldlinks lately are that I have to fiddle
with them for 15 minutes before installing to remove the sharp edges of
the slots, which makes opening a big PIA.

Lou
Ads
 

Home - Home - Home - Home - Home