A Cycling & bikes forum. CycleBanter.com

Go Back   Home » CycleBanter.com forum » rec.bicycles » Techniques
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

WHY A WATERFORD BIKE IS A JOKE



 
 
Thread Tools Display Modes
  #11  
Old April 25th 09, 04:06 AM posted to rec.bicycles.tech
Dan O
external usenet poster
 
Posts: 6,098
Default WHY AN ANDRE JUTE POST IS A JOKE

On Apr 24, 7:35 pm, jim beam wrote:
Tom Sherman wrote:
Andrew Muzi wrote:
Andre Jute wrote:
WHY A WATERFORD BIKE IS A JOKE
An investigation consequent on being hounded by American roadies
by Andre Jute


Last year when I was shopping for a low stepover bike, Tom Sherman and
other Americans, touting for business for their own industry,
suggested I look at Waterford Cycles' Godiva model:
http://waterfordbikes.com/now/models.php?Model=655
I looked, shuddered but said thanks politely, and moved on,
eventually buying a German/Dutch crossframe mixte design with historic
roots.
[...]
Godiva? Way too complex.
Nice clean Waterford open track frame:
http://www.yellowjersey.org/wfdopen.html


Since you don't get it,you may as well not get it in a seductively
pretty format with polished stainless lugwork.


YMMV.


What am I missing here? How is the Godiva more complex, other than cable
guide braze-ons?


For value, I think this is much better:
http://www.gunnarbikes.com/crosshairs.php. $1150 for a custom geometry
frame.


what's with this ridiculous steel obsession? this group has been
grossly infected recently it seems.


I wouldn't mind trying an aluminum frame, and when hunting around e.g.
Craigslist I do keep an eye open for Cannondale and Klein and the
like; but since I started out acquiring older, used (more affordable)
bicycles, I have a bunch of gear now for 126 mm rear dropout spacing,
and most of the quality frames available for this gear just happens to
be made of steel.

typically, aluminum is:

cheaper
stiffer - and thus more sable for non-freds
lighter
more corrosion resistant.

is there some kind of myopia/ignorance-of-the-facts virus i've been
missing out on?


methinks you must be immune, anyway ;-)

Ads
  #12  
Old April 25th 09, 04:23 AM posted to rec.bicycles.tech
Andre Jute[_2_]
external usenet poster
 
Posts: 10,422
Default WHY A WATERFORD BIKE IS A JOKE

On Apr 25, 4:05*am, jim beam wrote:
Andre Jute wrote:
I have two aliminium bikes which are both eminently satisfactory
except for one detail: the welding on one is ugly


that's an ignorant jobstian bull**** excuse. *if the mechanicals are
good and the microstructure good, that's all that matters to your
ability to ride the damned thing.


How it it "ignorant" to demand aesthetic satisfaction from the
artifacts one owns. Stop blustering, Jimbo; it makes you sound like a
troll. A Ford gets you there. A Bentley gets you there with a smile on
your face.

Andre Jute
*"The brain of an engineer is a delicate instrument instrument which
must be protected against the unevenness of the ground." -- Wifredo-
Pelayo Ricart Medina


yeah, and the brains of non-engineers need boiling in brine and vinegar
sometimes.


Especially the zero-aesthetic barbarians.

Andre Jute
The Real Thing -- slogan I coined for wool, later used for a fizzy
drink

Original text, in case you want to know, dealt with value for money
and pedigree in steel bikes:

*******
WHY A WATERFORD BIKE IS A JOKE
An investigation consequent on being hounded by American roadies
by Andre Jute
Last year when I was shopping for a low stepover bike, Tom Sherman
and
other Americans, touting for business for their own industry,
suggested I look at Waterford Cycles' Godiva model:
http://waterfordbikes.com/now/models.php?Model=655
I looked, shuddered but said thanks politely, and moved on,
eventually buying a German/Dutch crossframe mixte design with
historic
roots.
Now a bunch of American roadies, led by Russell Seaton, have been
hounding me for being different. Seaton cites the Waterford Godiva as
the sort of bike I should have bought. All right, since these pushy
roadies insist, let's look into a Waterford bike in more detail. The
pricelist, here,
http://waterfordbikes.com/now/pricel...dels&Model=655
reads like some kind of a sick joke. The bare frame with the
cheapest
lowest common denominator lugs costs $1800, a fork is $350 and up,
getting the fork painted to match is another $125 (!). box
"pinstriping" is $250, Rohloff dropouts $150, upgrade to decent
Rohloff dropouts from Paragon another $150 (a total of $300 for
Rohloff dropouts!). The total for the frame and fork is $2825.
No, I'm not pulling your leg. I looked it up and wrote it all down,
and then added it up carefully, several times. A Waterford frame with
a fork and the cheapest lugs plus good Rohloff dropouts, with the
single luxury of box pinstriping, will cost $2825 or 2130 Euro.
Better lugs will drive the price up by a minimum of $225, and a
machined brake bridge is $125. Remember these sums, for which you can
buy a whole bike some places. The total of $350 for a lug upgrade and
a carved brake bridge at Waterford is more than halfway to the price
of a frame with superb lugs and paint from a distinguished bicycle
maker with breeding, as I shall shortly demonstrate.
So, $3175 or 2400 Euro for a rather commonplace Waterford frame and
fork with pinstriping.
GET A FRAME WITH BREEDING INSTEAD --
FOR A FRACTION OF THE WATERFORD PRICE!
Hmm. In Germany, one can buy a Patria or Utopia custom-lugged steel
frame, with fork in the same colour, and stainless Rohloff dropouts,
and no thought of charging $350 extra (!) for the good lugs and the
delightfully carved brake bridge, and box coachlining by a famous
bikebuilder, for 700-850 Euro or a maximum of $1125, that's $2050
cheaper than the Waterford frame. And that is not for a common or
garden frame, that is for a very special frame.
Or, if you actually want the narrow-tyre road frame rather than the
German frames for tourers with Big Apple balloons, you can go to
Mercian for a Miss Mercian ($920)
http://www.merciancycles.co.uk/frame_miss_mercia.asp
or to Bob Jackson (prices from $653, including Rohloff dropouts)
http://www.bobjacksoncycles.co.uk/de...osCsid=68fd3b5....
and get a beautifully painted, arrow-lugged, luglined, frame and
fork
with a distinguished road pedigree.
WITH THE SAVINGS OF NOT BUYING WATERFORD,
GO UPMARKET
Who in his right mind would choose a Waterford Godiva frame instead
at
over three times to five times the price of a Mercian or a Bob
Jackson? A cyclist could have a Mercian or a Bob Jackson couriered to
the street in front of Waterford Cycles, go ask them if they can
match
the pedigree, and still be ahead over two thousand dollars,
essentially the price of outfitting a bike without ever asking the
price of Rohloff/SON/BUMM/Brooks/Nitto/Ortlieb/the best of
everything.
A Waterford frame and fork alone costs as much as a completely
equipped dream bike, with pedigree, from Mercian or Bob Jackson,
fitted out with the best of everything. There is no contest.
You're off your gourd, Russell Seaton, and your pals aren't any more
sane. Waterford is a joke.
IS WATERFORD'S GODIVA A MIXTE?
There's another reason to give Waterford a big miss besides having no
breeding and being grotesquely overpriced. It is that their frames
appear to be bog-standard and dull.
The same Russell Eaton we've already met as an example of someone
crazed with roadie nationalism, also tells us that Waterford calling
the Godiva a "mixte" frame is his excuse for taunting me that my
Utopia Kranich unisex crossframe-mixte
http://www.audio-talk.co.uk/fiultra/...20CYCLING.html
is a "girl's" bike. (I'm not even bothering to answer such crass
American stupidity.)
A mixte is a bicycle with two thinnish bars running from the head
tube
to the rear dropouts (or frame-ends, to be technically correct). The
Godiva doesn't have these mixte bars and therefore isn't a mixte. The
Godiva is a simple traditional parallelogram ladies' frame, pretty
commonplace really.
What Waterford actually says about the Godiva is a typical piece of
advertising department weaselling: that it has "a classy mixte
profile". In other words, Waterford knows the Godiva is not a mixte
but is trying to claim for the Godiva the prestige or perhaps the
cross-gender sales of the (unisex) mixte.
Russell Seaton simply was too crazed with nationalist roadyism (or
should that be rowdyism?) to comprehend that Waterford were
intentionally misleading him. Poor Russell.
Copyright © 2009 Andre Jute. Free to reprint on not-for-profit
netsites. For any other use approach the author.
  #13  
Old April 25th 09, 04:29 AM posted to rec.bicycles.tech
Andre Jute[_2_]
external usenet poster
 
Posts: 10,422
Default WHY AN ANDRE JUTE POST IS THE PARADIGM

On Apr 25, 4:06*am, Dan O wrote:

I wouldn't mind trying an aluminum frame, and when hunting around e.g.
Craigslist I do keep an eye open for Cannondale


Gotta be a Cannondale. Smooth welding and beautiful lines. Last year I
had a Cannondale Trekking Rohloff (probably a European-only model) on
order but the factory sold out just as my order went in. Wonderfully
satisfying custom-designed dropouts. -- AJ

and Klein and the
like; but since I started out acquiring older, used (more affordable)
bicycles, I have a bunch of gear now for 126 mm rear dropout spacing,
and most of the quality frames available for this gear just happens to
be made of steel.

typically, aluminum is:


cheaper
stiffer - and thus more sable for non-freds
lighter
more corrosion resistant.


is there some kind of myopia/ignorance-of-the-facts virus i've been
missing out on?


methinks you must be immune, anyway ;-)


  #14  
Old April 25th 09, 04:30 AM posted to rec.bicycles.tech
Carl Sundquist
external usenet poster
 
Posts: 1,810
Default WHY A WATERFORD BIKE IS A JOKE

Andre Jute wrote:
On Apr 25, 2:57 am, AMuzi wrote:
Carl Sundquist wrote:
Andre Jute wrote:
On Apr 25, 1:40 am, AMuzi wrote:
Andre Jute wrote:
WHY A WATERFORD BIKE IS A JOKE
An investigation consequent on being hounded by American roadies
by Andre Jute
Last year when I was shopping for a low stepover bike, Tom Sherman and
other Americans, touting for business for their own industry,
suggested I look at Waterford Cycles' Godiva model:
http://waterfordbikes.com/now/models.php?Model=655
I looked, shuddered but said thanks politely, and moved on,
eventually buying a German/Dutch crossframe mixte design with historic
roots.
Now a bunch of American roadies, led by Russell Seaton, have been
hounding me for being different. Seaton cites the Waterford Godiva as
the sort of bike I should have bought. All right, since these pushy
roadies insist, let's look into a Waterford bike in more detail. The
pricelist, here,
http://waterfordbikes.com/now/pricel...dels&Model=655
reads like some kind of a sick joke. The bare frame with the cheapest
lowest common denominator lugs costs $1800, a fork is $350 and up,
getting the fork painted to match is another $125 (!). box
"pinstriping" is $250, Rohloff dropouts $150, upgrade to decent
Rohloff dropouts from Paragon another $150 (a total of $300 for
Rohloff dropouts!). The total for the frame and fork is $2825.
No, I'm not pulling your leg. I looked it up and wrote it all down,
and then added it up carefully, several times. A Waterford frame with
a fork and the cheapest lugs plus good Rohloff dropouts, with the
single luxury of box pinstriping, will cost $2825 or 2130 Euro.
Better lugs will drive the price up by a minimum of $225, and a
machined brake bridge is $125. Remember these sums, for which you can
buy a whole bike some places. The total of $350 for a lug upgrade and
a carved brake bridge at Waterford is more than halfway to the price
of a frame with superb lugs and paint from a distinguished bicycle
maker with breeding, as I shall shortly demonstrate.
So, $3175 or 2400 Euro for a rather commonplace Waterford frame and
fork with pinstriping.
GET A FRAME WITH BREEDING INSTEAD --
FOR A FRACTION OF THE WATERFORD PRICE!
Hmm. In Germany, one can buy a Patria or Utopia custom-lugged steel
frame, with fork in the same colour, and stainless Rohloff dropouts,
and no thought of charging $350 extra (!) for the good lugs and the
delightfully carved brake bridge, and box coachlining by a famous
bikebuilder, for 700-850 Euro or a maximum of $1125, that's $2050
cheaper than the Waterford frame. And that is not for a common or
garden frame, that is for a very special frame.
Or, if you actually want the narrow-tyre road frame rather than the
German frames for tourers with Big Apple balloons, you can go to
Mercian for a Miss Mercian ($920)
http://www.merciancycles.co.uk/frame_miss_mercia.asp
or to Bob Jackson (prices from $653, including Rohloff dropouts)
http://www.bobjacksoncycles.co.uk/de...osCsid=68fd3b5...
and get a beautifully painted, arrow-lugged, luglined, frame and fork
with a distinguished road pedigree.
WITH THE SAVINGS OF NOT BUYING WATERFORD,
GO UPMARKET
Who in his right mind would choose a Waterford Godiva frame instead at
over three times to five times the price of a Mercian or a Bob
Jackson? A cyclist could have a Mercian or a Bob Jackson couriered to
the street in front of Waterford Cycles, go ask them if they can match
the pedigree, and still be ahead over two thousand dollars,
essentially the price of outfitting a bike without ever asking the
price of Rohloff/SON/BUMM/Brooks/Nitto/Ortlieb/the best of everything.
A Waterford frame and fork alone costs as much as a completely
equipped dream bike, with pedigree, from Mercian or Bob Jackson,
fitted out with the best of everything. There is no contest.
You're off your gourd, Russell Seaton, and your pals aren't any more
sane. Waterford is a joke.
IS WATERFORD'S GODIVA A MIXTE?
There's another reason to give Waterford a big miss besides having no
breeding and being grotesquely overpriced. It is that their frames
appear to be bog-standard and dull.
The same Russell Eaton we've already met as an example of someone
crazed with roadie nationalism, also tells us that Waterford calling
the Godiva a "mixte" frame is his excuse for taunting me that my
Utopia Kranich unisex crossframe-mixte
http://www.audio-talk.co.uk/fiultra/...20CYCLING.html
is a "girl's" bike. (I'm not even bothering to answer such crass
American stupidity.)
A mixte is a bicycle with two thinnish bars running from the head tube
to the rear dropouts (or frame-ends, to be technically correct). The
Godiva doesn't have these mixte bars and therefore isn't a mixte. The
Godiva is a simple traditional parallelogram ladies' frame, pretty
commonplace really.
What Waterford actually says about the Godiva is a typical piece of
advertising department weaselling: that it has "a classy mixte
profile". In other words, Waterford knows the Godiva is not a mixte
but is trying to claim for the Godiva the prestige or perhaps the
cross-gender sales of the (unisex) mixte.
Russell Seaton simply was too crazed with nationalist roadyism (or
should that be rowdyism?) to comprehend that Waterford were
intentionally misleading him. Poor Russell.
Copyright © 2009 Andre Jute. Free to reprint on not-for-profit
netsites. For any other use approach the author.
Godiva? Way too complex.
Let's forget the Godiva. There's nothing special about it to justify
even the base price, never mind tarting it up. Especially now that we
do have something special to look at:
Nice clean Waterford open track
frame:http://www.yellowjersey.org/wfdopen.html
Okay. Very nice. A colour I love too. And excellent photographs to
perve over.
What does "open" mean in your sentence above.
I don't know either. Maybe it has something to do with where the
handlebar tape stops.

We say "open frame" rather than "girl bike".


I certainly hope Seaton sees that. This thread is was created to
educate him.

(p.s to Carl: tape, double bumpers, saddle angle etc were
explicitly specified in great detail.)


Bumpers? (Sorry, sorry, sorry, I know, TGIF and you're trying to get
to the pub.) But Sheldon doesn't have bumpers in the glossary. -- AJ


Bumpers (which almost look like S&S type couplings) are on the down
tubes to protect the tubes from impacts by the handlebar if it swings
around that far.




--
Andrew Muzi
www.yellowjersey.org/
Open every day since 1 April, 1971


  #15  
Old April 25th 09, 04:34 AM posted to rec.bicycles.tech
RonSonic
external usenet poster
 
Posts: 2,658
Default WHY A WATERFORD BIKE IS A JOKE

On Fri, 24 Apr 2009 19:44:44 -0700 (PDT), Andre Jute wrote:


(p.s to Carl: tape, double bumpers, saddle angle etc were
explicitly specified in great detail.)


Bumpers? (Sorry, sorry, sorry, I know, TGIF and you're trying to get
to the pub.) But Sheldon doesn't have bumpers in the glossary. -- AJ


I'd think that being so sophisticated that you deem one of the finer makes a
joke you might have the ability to look at a ****ing picture and pick out the
items of which there are two that aren't mentioned in Sheldon's glossary. Hint,
they are prominent in the photo's and most bikes don't have them.

First magnafluxing in a thread about aluminum seatposts and then this.

Seems you have that getting to the pub problem solved.
  #16  
Old April 25th 09, 04:35 AM posted to rec.bicycles.tech
jim beam[_4_]
external usenet poster
 
Posts: 318
Default WHY A WATERFORD BIKE IS A JOKE

Andre Jute wrote:
On Apr 25, 4:05�am, jim beam wrote:
Andre Jute wrote:
I have two aliminium bikes which are both eminently satisfactory
except for one detail: the welding on one is ugly

that's an ignorant jobstian bull**** excuse. �if the mechanicals are
good and the microstructure good, that's all that matters to your
ability to ride the damned thing.


How it it "ignorant" to demand aesthetic satisfaction from the
artifacts one owns. Stop blustering, Jimbo; it makes you sound like a
troll. A Ford gets you there. A Bentley gets you there with a smile on
your face.


it's attributing more value to the aesthetics than the tech, that's why.
tech news group, remember?




Andre Jute
�"The brain of an engineer is a delicate instrument instrument which
must be protected against the unevenness of the ground." -- Wifredo-
Pelayo Ricart Medina

yeah, and the brains of non-engineers need boiling in brine and vinegar
sometimes.


Especially the zero-aesthetic barbarians.

Andre Jute
The Real Thing -- slogan I coined for wool, later used for a fizzy
drink

Original text, in case you want to know, dealt with value for money
and pedigree in steel bikes:

snip more steel blathering

andre, examine the facts associated with the following:

corrosion
price
stiffness
weight

now quitcher bitchin.
  #17  
Old April 25th 09, 04:36 AM posted to rec.bicycles.tech
Andre Jute[_2_]
external usenet poster
 
Posts: 10,422
Default WHY A WATERFORD BIKE IS A JOKE

On Apr 25, 4:30*am, Carl Sundquist wrote:
Andre Jute wrote:
On Apr 25, 2:57 am, AMuzi wrote:
Carl Sundquist wrote:
Andre Jute wrote:
On Apr 25, 1:40 am, AMuzi wrote:
Andre Jute wrote:
WHY A WATERFORD BIKE IS A JOKE
An investigation consequent on being hounded by American roadies
by Andre Jute
Last year when I was shopping for a low stepover bike, Tom Sherman and
other Americans, touting for business for their own industry,
suggested I look at Waterford Cycles' Godiva model:
*http://waterfordbikes.com/now/models.php?Model=655
*I looked, shuddered but said thanks politely, and moved on,
eventually buying a German/Dutch crossframe mixte design with historic
roots.
Now a bunch of American roadies, led by Russell Seaton, have been
hounding me for being different. Seaton cites the Waterford Godiva as
the sort of bike I should have bought. All right, since these pushy
roadies insist, let's look into a Waterford bike in more detail. The
pricelist, *here,
http://waterfordbikes.com/now/pricel...dels&Model=655
*reads like some kind of a sick joke. The bare frame with the cheapest
lowest common denominator lugs costs $1800, a fork is $350 and up,
getting the fork painted to match is another $125 (!). box
"pinstriping" is $250, Rohloff dropouts $150, upgrade to decent
Rohloff dropouts from Paragon another $150 (a total of $300 for
Rohloff dropouts!). The total for the frame and fork is $2825.
No, I'm not pulling your leg. I looked it up and wrote it all down,
and then added it up carefully, several times. A Waterford frame with
a fork and the cheapest lugs plus good Rohloff dropouts, with the
single luxury of box pinstriping, will cost $2825 or 2130 Euro.
Better lugs will drive the price up by a minimum of $225, and a
machined brake bridge is $125. Remember these sums, for which you can
buy a whole bike some places. The total of $350 for a lug upgrade and
a carved brake bridge at Waterford is more than halfway to the price
of a frame with superb lugs and paint from a distinguished bicycle
maker with breeding, as I shall shortly demonstrate.
So, $3175 or 2400 Euro for a rather commonplace Waterford frame and
fork with pinstriping.
GET A FRAME WITH BREEDING INSTEAD --
FOR A FRACTION OF THE WATERFORD PRICE!
Hmm. In Germany, one can buy a Patria or Utopia custom-lugged steel
frame, with fork in the same colour, and stainless Rohloff dropouts,
and no thought of charging $350 extra (!) for the good lugs and the
delightfully carved brake bridge, and box coachlining by a famous
bikebuilder, for 700-850 Euro or a maximum of $1125, that's $2050
cheaper than the Waterford frame. And that is not for a common or
garden frame, that is for a very special frame.
Or, if you actually want the narrow-tyre road frame rather than the
German frames for tourers with Big Apple balloons, you can go to
Mercian for a Miss Mercian ($920)
http://www.merciancycles.co.uk/frame_miss_mercia.asp
*or to Bob Jackson (prices from $653, including Rohloff dropouts)
http://www.bobjacksoncycles.co.uk/de...osCsid=68fd3b5...
*and get a beautifully painted, arrow-lugged, luglined, frame and fork
with a distinguished road pedigree.
WITH THE SAVINGS OF NOT BUYING WATERFORD,
GO UPMARKET
Who in his right mind would choose a Waterford Godiva frame instead at
over three times to five times the price of a Mercian or a Bob
Jackson? A cyclist could have a Mercian or a Bob Jackson couriered to
the street in front of Waterford Cycles, go ask them if they can match
the pedigree, and still be ahead over two thousand dollars,
essentially the price of outfitting a bike without ever asking the
price of Rohloff/SON/BUMM/Brooks/Nitto/Ortlieb/the best of everything.
A Waterford frame and fork alone costs as much as a completely
equipped dream bike, with pedigree, from Mercian or Bob Jackson,
fitted out with the best of everything. There is no contest.
You're off your gourd, Russell Seaton, and your pals aren't any more
sane. Waterford is a joke.
IS WATERFORD'S GODIVA A MIXTE?
There's another reason to give Waterford a big miss besides having no
breeding and being grotesquely overpriced. It is that their frames
appear to be bog-standard and dull.
The same Russell Eaton we've already met as an example of someone
crazed with roadie nationalism, also tells us that Waterford calling
the Godiva a "mixte" frame is his excuse for taunting me that my
Utopia Kranich unisex crossframe-mixte
http://www.audio-talk.co.uk/fiultra/...20CYCLING.html
*is a "girl's" bike. (I'm not even bothering to answer such crass
American stupidity.)
A mixte is a bicycle with two thinnish bars running from the head tube
to the rear dropouts (or frame-ends, to be technically correct). The
Godiva doesn't have these mixte bars and therefore isn't a mixte. The
Godiva is a simple traditional parallelogram ladies' frame, pretty
commonplace really.
What Waterford actually says about the Godiva is a typical piece of
advertising department weaselling: that it has "a classy mixte
profile". In other words, Waterford knows the Godiva is not a mixte
but is trying to claim for the Godiva the prestige or perhaps the
cross-gender sales of the (unisex) mixte.
Russell Seaton simply was too crazed with nationalist roadyism (or
should that be rowdyism?) to comprehend that Waterford were
intentionally misleading him. Poor Russell.
Copyright © 2009 Andre Jute. Free to reprint on not-for-profit
netsites. For any other use approach the author.
Godiva? Way too complex.
Let's forget the Godiva. There's nothing special about it to justify
even the base price, never mind tarting it up. Especially now that we
do have something special to look at:
Nice clean Waterford open track
frame:http://www.yellowjersey.org/wfdopen.html
Okay. Very nice. A colour I love too. And excellent photographs to
perve over.
What does "open" mean in your sentence above.
I don't know either. Maybe it has something to do with where the
handlebar tape stops.
We say "open frame" rather than "girl bike".


I certainly hope Seaton sees that. This thread is was created to
educate him.


(p.s to Carl: tape, double bumpers, saddle angle etc were
explicitly specified in great detail.)


Bumpers? (Sorry, sorry, sorry, I know, TGIF and you're trying to get
to the pub.) But Sheldon doesn't have bumpers in the glossary. -- AJ


Bumpers (which almost look like S&S type couplings) are on the down
tubes to protect the tubes from impacts by the handlebar if it swings
around that far.


Thanks, Carl. I studied the photographs again and wondered about
those, deciding they must be some obsolete brand of folding couplings.
Okay, bumpers. That's altogether a nice bike with its tasteful
brightwork. -- AJ


--
Andrew Muzi
* www.yellowjersey.org/
* Open every day since 1 April, 1971


  #18  
Old April 25th 09, 04:37 AM posted to rec.bicycles.tech
jim beam[_4_]
external usenet poster
 
Posts: 318
Default WHY AN ANDRE JUTE POST IS THE PARADIGM

Andre Jute wrote:
On Apr 25, 4:06�am, Dan O wrote:

I wouldn't mind trying an aluminum frame, and when hunting around e.g.
Craigslist I do keep an eye open for Cannondale


Gotta be a Cannondale. Smooth welding and beautiful lines. Last year I
had a Cannondale Trekking Rohloff (probably a European-only model) on
order but the factory sold out just as my order went in. Wonderfully
satisfying custom-designed dropouts. -- AJ


who givesa****? cut that sucker up and put it under the microscope -
i'll tell you what's beautiful.



and Klein and the
like; but since I started out acquiring older, used (more affordable)
bicycles, I have a bunch of gear now for 126 mm rear dropout spacing,
and most of the quality frames available for this gear just happens to
be made of steel.

typically, aluminum is:
cheaper
stiffer - and thus more sable for non-freds
lighter
more corrosion resistant.
is there some kind of myopia/ignorance-of-the-facts virus i've been
missing out on?

methinks you must be immune, anyway ;-)


  #19  
Old April 25th 09, 04:42 AM posted to rec.bicycles.tech
RonSonic
external usenet poster
 
Posts: 2,658
Default WHY A WATERFORD BIKE IS A JOKE

On Fri, 24 Apr 2009 20:23:52 -0700 (PDT), Andre Jute wrote:

On Apr 25, 4:05*am, jim beam wrote:
Andre Jute wrote:
I have two aliminium bikes which are both eminently satisfactory
except for one detail: the welding on one is ugly


that's an ignorant jobstian bull**** excuse. *if the mechanicals are
good and the microstructure good, that's all that matters to your
ability to ride the damned thing.


How it it "ignorant" to demand aesthetic satisfaction from the
artifacts one owns. Stop blustering, Jimbo; it makes you sound like a
troll. A Ford gets you there. A Bentley gets you there with a smile on
your face.

Andre Jute
*"The brain of an engineer is a delicate instrument instrument which
must be protected against the unevenness of the ground." -- Wifredo-
Pelayo Ricart Medina


yeah, and the brains of non-engineers need boiling in brine and vinegar
sometimes.


Especially the zero-aesthetic barbarians.

Andre Jute
The Real Thing -- slogan I coined for wool, later used for a fizzy
drink

Original text, in case you want to know, dealt with value for money
and pedigree in steel bikes:


Criticising Waterford as lacking "pedigree" is probably not a real strong
argument.
  #20  
Old April 25th 09, 04:46 AM posted to rec.bicycles.tech
AMuzi
external usenet poster
 
Posts: 13,447
Default WHY A WATERFORD BIKE IS A JOKE

Andre Jute wrote:
Bumpers? (Sorry, sorry, sorry, I know, TGIF and you're trying to get
to the pub.) But Sheldon doesn't have bumpers in the glossary. -- AJ


Urethane layered with a tempered steel center. Keep the
handlebar and caliper from denting frame tubes.

I was attempting levity with my 'complex' comment. Didn't
achieve it I guess.

--
Andrew Muzi
www.yellowjersey.org/
Open every day since 1 April, 1971
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
bike joke Tom \Johnny Sunset\ Sherman[_1058_] General 0 August 29th 07 04:27 AM
bike joke smn General 7 August 24th 07 07:57 PM
A bike related joke Craig Brossman Mountain Biking 10 March 26th 06 12:59 PM
FA: Last 4 Hours: Waterford 18" Mountain Bike Currently Only $455 LR Marketplace 0 November 4th 04 12:32 AM
FA: 18" Waterford Mountain Bike LR Marketplace 0 October 28th 04 11:49 PM


All times are GMT +1. The time now is 11:49 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 CycleBanter.com.
The comments are property of their posters.