|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Recommendations for Rollers?
I'm sure this has been discussed to death on this NG, but can anybody point
me in the right direction for a not-too-expensive, decent set of rollers. Between my job and the weather, I didn't ride half as much as usual this summer and fall. That makes my winter off-season quite a bit longer. Rather than slopping on another ten pounds between now and the spring, I'd like to do some touring in my basement. My bike is a GT MTB with narrow (Specialized Nimbus) tires. I do mostly moderately paced touring during the season, so I'm not looking to make rock-solid calves or to set any records. I just want to stay active. I also know I'll probably get tired of the rollers after a few weeks, so I need a set that's priced reasonably and that has a decent resale value. |
Ads |
#2
|
|||
|
|||
Recommendations for Rollers?
I have been using Sportcrafters rollers for the past 6
weeks, and so far they have been excellent. There's lot of information about choosing roller size and material on their website, www.sportcrafters.com/welcometop.htm I paid $179 at Branford Bike. These rollers appear to be the same as the Cyclops 3.25" rollers, but less expensive. I used a trainer for the past 2 winters, and I find the rollers much more interesting and challenging. Now I'm doing about 30 min on the rollers, then another 10min of hard pedalling on the trainer. I have found that I have to earn every minute on the rollers. As for resale value, I don't know about that. I have no plans to sell mine. Bob "NYRides" wrote in message ... I'm sure this has been discussed to death on this NG, but can anybody point me in the right direction for a not-too-expensive, decent set of rollers. |
#3
|
|||
|
|||
Recommendations for Rollers?
"Bob" wrote in message . .. I have been using Sportcrafters rollers for the past 6 weeks, and so far they have been excellent. There's lot of information about choosing roller size and material on their website, www.sportcrafters.com/welcometop.htm I paid $179 at Branford Bike. These rollers appear to be the same as the Cyclops 3.25" rollers, but less expensive. I used a trainer for the past 2 winters, and I find the rollers much more interesting and challenging. Now I'm doing about 30 min on the rollers, then another 10min of hard pedalling on the trainer. I have found that I have to earn every minute on the rollers. As for resale value, I don't know about that. I have no plans to sell mine. Bob I tore up a set of CycleOps rollers in a season. The end caps came unglued from the rollers and the bearings got fried in no time. When I tried to get some satisfaction from CycleOps, I found myself in line behind a long list of creditors. CycleOps is back under different ownership, but I believe the rollers they're selling are virtually the same as the garbage I bought from them. There's one name that stands WAY above all the rest in the world of rollers and that's Kreitler. Their basic Challenger rollers are an awesome product. I've had a set for quite a few years now and have hundreds of hours on them. They're as smooth now as the day I bought them. Expect to pay around $300. Also, expect to get what you pay for when you buy rollers. I know the original poster was concerned about his budget and a relatively low level of usage. But he also expressed concern about resale. I don't think you'd have any trouble unloading a set of Kreitlers for a decent price. Another brand would likely be another story. Bob C. |
#4
|
|||
|
|||
Recommendations for Rollers?
"NYRides" writes:
I'm sure this has been discussed to death on this NG, but can anybody point me in the right direction for a not-too-expensive, decent set of rollers. Between my job and the weather, I didn't ride half as much as usual this summer and fall. That makes my winter off-season quite a bit longer. Rather than slopping on another ten pounds between now and the spring, I'd like to do some touring in my basement Performance and/or Nashbar sell Tacx rollers, which are relabelled as the respective house brand. It's a name brand in Europe. Those'd probably be fine. Kreitlers are the best, and their lower end model is more reasonably priced. Or you can often find them for sale used. |
#5
|
|||
|
|||
Recommendations for Rollers?
One reason I bought the Sportcrafters is the lifetime guarantee.
Bob "psycholist" wrote in message ... I tore up a set of CycleOps rollers in a season. The end caps came unglued from the rollers and the bearings got fried in no time. When I tried to get some satisfaction from CycleOps, I found myself in line behind a long list of creditors. CycleOps is back under different ownership, but I believe the rollers they're selling are virtually the same as the garbage I bought from them. |
#6
|
|||
|
|||
Recommendations for Rollers?
I second the sportcrafters recommendation. They are very smooth, come
completely assembled, have a lifetime warrenty, and are priced well. "Bob" wrote in message . .. I have been using Sportcrafters rollers for the past 6 weeks, and so far they have been excellent. There's lot of information about choosing roller size and material on their website, www.sportcrafters.com/welcometop.htm I paid $179 at Branford Bike. These rollers appear to be the same as the Cyclops 3.25" rollers, but less expensive. I used a trainer for the past 2 winters, and I find the rollers much more interesting and challenging. Now I'm doing about 30 min on the rollers, then another 10min of hard pedalling on the trainer. I have found that I have to earn every minute on the rollers. As for resale value, I don't know about that. I have no plans to sell mine. Bob "NYRides" wrote in message ... I'm sure this has been discussed to death on this NG, but can anybody point me in the right direction for a not-too-expensive, decent set of rollers. |
#7
|
|||
|
|||
Recommendations for Rollers?
Just go on e-bay and pick yourself up a set of nashbar or performance
rollers for about $80. That way if they last you a year or two at least you got your moneys worth. I picked up a set of performance rollers last year and they have been working fine (about 4-5 hours of riding a week.) How can you go wrong. -- |
#8
|
|||
|
|||
Recommendations for Rollers?
Just go on e-bay and pick yourself up a set of nashbar or performance
rollers for about $80. That way if they last you a year or two at least you got your moneys worth. I picked up a set of performance rollers last year and they have been working fine (about 4-5 hours of riding a week.) How can you go wrong. -- |
#9
|
|||
|
|||
Recommendations for Rollers?
"NYRides" wrote in message ... I'm sure this has been discussed to death on this NG, but can anybody point me in the right direction for a not-too-expensive, decent set of rollers. Between my job and the weather, I didn't ride half as much as usual this summer and fall. That makes my winter off-season quite a bit longer. Rather than slopping on another ten pounds between now and the spring, I'd like to do some touring in my basement. My bike is a GT MTB with narrow (Specialized Nimbus) tires. I do mostly moderately paced touring during the season, so I'm not looking to make rock-solid calves or to set any records. I just want to stay active. I also know I'll probably get tired of the rollers after a few weeks, so I need a set that's priced reasonably and that has a decent resale value. You can see the warning on the sportcrafters website ("Keep away from sunlight and excessive heat or drum will warp and you may sense some vibration. DO NOT transport in a car in the summer!"). I bought a set of Nashbar PVC rollers, and they warped to the point of uselessness very soon, and I never rode them outdoors!!. I never saw the warning about being left in the sun or heat, but I guess the sunlight coming through the garage window was enough. I was able to salvage them by taking the caps off, and replacing the PVC with steel pipe. I now have much more inertia, so it feels more natural than with PVC. If you know someone with a lathe and who is handy, this may be a great option for you to purchase a cheap used set of PVC rollers and convert them, otherwise, step up and get a quality pair of METAL rollers. All I've seen is aluminum, but do not get PVC. My other piece of advice is to MAKE SURE you properly place the front roller where it is supposed to go. I had the placement incorrect and riding was very difficult to the point where I attempted to give away the rollers. Luckily I tried again and now it is a pleasure to ride. Get a set, you won't regret it. |
#10
|
|||
|
|||
Recommendations for Rollers?
I bought a set from Excel (tacx ecotrack) the ridged ones second year I
Waigh 220 and they stay in the basement I have bin happy with them. "NYRides" wrote in message ... I'm sure this has been discussed to death on this NG, but can anybody point me in the right direction for a not-too-expensive, decent set of rollers. Between my job and the weather, I didn't ride half as much as usual this summer and fall. That makes my winter off-season quite a bit longer. Rather than slopping on another ten pounds between now and the spring, I'd like to do some touring in my basement. My bike is a GT MTB with narrow (Specialized Nimbus) tires. I do mostly moderately paced touring during the season, so I'm not looking to make rock-solid calves or to set any records. I just want to stay active. I also know I'll probably get tired of the rollers after a few weeks, so I need a set that's priced reasonably and that has a decent resale value. |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Trek 5200 Tire Recommendations | David | General | 13 | October 19th 03 09:09 PM |
Cycling Holiday Tours - Any Recommendations? | Elisa Francesca Roselli | General | 9 | October 11th 03 03:53 PM |
Needing Female Bicycle Recommendations... | Chad Thompson | General | 6 | August 26th 03 07:20 AM |
Roak bike recommendations please | Mike Jacoubowsky | General | 1 | August 25th 03 03:49 PM |
Bike recommendations | thomas_delaney | General | 1 | July 29th 03 04:27 AM |