|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
securing bike lock to frame or pannier rack
Does anyone know of any novel/interesting and competent ways of securing a small but heavy u lock to a bike frame whe riding? I had used the kryptonite bracket holder on the seat post but that got in the way of any tool bag under the saddle. I also had two break on me. There are a lot of cobbles near me and lock used to chatter in the clasp. No where else was any good on the frame because of bottle holders or brake/gear cabling and the extra area required by the holder meant some areas were off bounds. |
Ads |
#2
|
|||
|
|||
securing bike lock to frame or pannier rack
On Sep 30, 9:25 pm, wrote:
Does anyone know of any novel/interesting and competent ways of securing a small but heavy u lock to a bike frame whe riding? I had used the kryptonite bracket holder on the seat post but that got in the way of any tool bag under the saddle. I also had two break on me. There are a lot of cobbles near me and lock used to chatter in the clasp. No where else was any good on the frame because of bottle holders or brake/gear cabling and the extra area required by the holder meant some areas were off bounds. Put it under some bungees on the rear rack where nature intended it! Alternately, unlock it then shove the u part up through the rack struts in some manner so it's wedged, then add the lock bar. I could post a picture on how I do this with my combo if coerced. |
#3
|
|||
|
|||
securing bike lock to frame or pannier rack
Penny wrote:
Does anyone know of any novel/interesting and competent ways of securing a small but heavy u lock to a bike frame whe riding? I had used the kryptonite bracket holder on the seat post but that got in the way of any tool bag under the saddle. I also had two break on me. There are a lot of cobbles near me and lock used to chatter in the clasp. No where else was any good on the frame because of bottle holders or brake/gear cabling and the extra area required by the holder meant some areas were off bounds. There is available ( in the UK at any rate ) something called an UGH bracket:- http://www.wiggle.co.uk/p/Cycle/7/Ab...et/5300006187/ There are three of them which fit onto the side of the rack ( two on the top rail and one on the leg )to carry a U-lock or umbrella etc. They work pretty well,have used them for quite a while.Only "problem" is that if you want to attach a pannier at that side you have to remove them but apart from that,no problems. Sam Salt |
#4
|
|||
|
|||
securing bike lock to frame or pannier rack
On Sep 30, 6:25*am, wrote:
Does anyone know of any novel/interesting and competent ways of securing a small but heavy u lock to a bike frame whe riding? I had used the kryptonite bracket holder on the seat post but that got in the way of any tool bag under the saddle. I also had two break on me. There are a lot of cobbles near me and lock used to chatter in the clasp. No where else was any good on the frame because of bottle holders or brake/gear cabling and the extra area required by the holder meant some areas were off bounds. Use the kryptonite bracket on the fork. That's nice and out of the way of anything else you want to attach to the bike, yet always there when you stop. Everyone who sees it wonders why they didn't think of that. The style of bracket with a metal fitting on the lock holds the lock quiet & securely -- http://www.bikesomewhere.com/bikesom...4116/19979?g=1 -pm |
#5
|
|||
|
|||
securing bike lock to frame or pannier rack
Penny wrote:
Does anyone know of any novel/interesting and competent ways of securing a small but heavy u lock to a bike frame whe riding? I had used the kryptonite bracket holder on the seat post but that got in the way of any tool bag under the saddle. I also had two break on me. There are a lot of cobbles near me and lock used to chatter in the clasp. No where else was any good on the frame because of bottle holders or brake/gear cabling and the extra area required by the holder meant some areas were off bounds. See "http://www.sjscycles.co.uk/product.asp?pf_id=6994". I think this is what you're looking for. They will ship to the U.S.. You can't buy something so high tech in the U.S. unfortunately. You could use something like this "http://www.rei.com/product/780549" but they only sell it with a lock, and users say that it rattles. If I were fabricating a holder for a rear rack, what I would do is to buy a length of aluminum angle from Online Metals, "http://www.onlinemetals.com/merchant.cfm?id=61&step=2&top_cat=60". I would attach it to the rack using some stainless steel U bolts, two attached to the top of the rack, and one U bolt on one of the struts. I would drill two holes for the U bolt to go through, and I would put the shackle on the angle with the U part of the lock hanging down. Then I'd secure the bottom of the U with a velcro strap around a strut. I'd do various rubber pads and shims to keep it from rattling Also see "http://www.twofish.biz/bike.html" for a way of securing it on your handlebars. Some rear racks had a partial flat platform, and the lock shackle can be on top of the rack, and the U piece come up through the gap, and it'll rest against the rack strut on the outside. Some racks have brackets built in, i.e. "http://www.ortliebusa.com/CartGenie/prod-119.htm" |
#6
|
|||
|
|||
securing bike lock to frame or pannier rack
SMS aka Steven M. Scharf wrote:
Penny wrote: Does anyone know of any novel/interesting and competent ways of securing a small but heavy u lock to a bike frame whe riding? I had used the kryptonite bracket holder on the seat post but that got in the way of any tool bag under the saddle. I also had two break on me. There are a lot of cobbles near me and lock used to chatter in the clasp. No where else was any good on the frame because of bottle holders or brake/gear cabling and the extra area required by the holder meant some areas were off bounds. See "http://www.sjscycles.co.uk/product.asp?pf_id=6994". I think this is what you're looking for. They will ship to the U.S.. You can't buy something so high tech in the U.S. unfortunately. [...] Penny is in Germany, no? -- Tom Sherman - 42.435731,-83.985007 If my posts in general annoy or offend, please kill-file. |
#7
|
|||
|
|||
securing bike lock to frame or pannier rack
In article ,
wrote: Does anyone know of any novel/interesting and competent ways of securing a small but heavy u lock to a bike frame whe riding? I had used the kryptonite bracket holder on the seat post but that got in the way of any tool bag under the saddle. I also had two break on me. There are a lot of cobbles near me and lock used to chatter in the clasp. No where else was any good on the frame because of bottle holders or brake/gear cabling and the extra area required by the holder meant some areas were off bounds. I have that problem. Bungee cord to the rack. Drop it into a nylon pannier. -- Michael Press |
#8
|
|||
|
|||
securing bike lock to frame or pannier rack
SMS writes:
Penny wrote: Does anyone know of any novel/interesting and competent ways of securing a small but heavy u lock to a bike frame whe riding? I had used the kryptonite bracket holder on the seat post but that got in the way of any tool bag under the saddle. I also had two break on me. There are a lot of cobbles near me and lock used to chatter in the clasp. No where else was any good on the frame because of bottle holders or brake/gear cabling and the extra area required by the holder meant some areas were off bounds. See "http://www.sjscycles.co.uk/product.asp?pf_id=6994". I think this is what you're looking for. They will ship to the U.S.. You can't buy something so high tech in the U.S. unfortunately. You could use something like this "http://www.rei.com/product/780549" but they only sell it with a lock, and users say that it rattles. If I were fabricating a holder for a rear rack, what I would do is to buy a length of aluminum angle from Online Metals, "http://www.onlinemetals.com/merchant.cfm?id=61&step=2&top_cat=60". I would attach it to the rack using some stainless steel U bolts, two attached to the top of the rack, and one U bolt on one of the struts. I would drill two holes for the U bolt to go through, and I would put the shackle on the angle with the U part of the lock hanging down. Then I'd secure the bottom of the U with a velcro strap around a strut. I'd do various rubber pads and shims to keep it from rattling Also see "http://www.twofish.biz/bike.html" for a way of securing it on your handlebars. Some rear racks had a partial flat platform, and the lock shackle can be on top of the rack, and the U piece come up through the gap, and it'll rest against the rack strut on the outside. Some racks have brackets built in, i.e. "http://www.ortliebusa.com/CartGenie/prod-119.htm" I just had a good idea. A block of robber with 2 channels each side. Simply lock the lock on the pannier width ways. If there are bags on then the lock can go in them anyway. |
#9
|
|||
|
|||
securing bike lock to frame or pannier rack
pm writes:
On Sep 30, 6:25Â*am, wrote: Does anyone know of any novel/interesting and competent ways of securing a small but heavy u lock to a bike frame whe riding? I had used the kryptonite bracket holder on the seat post but that got in the way of any tool bag under the saddle. I also had two break on me. There are a lot of cobbles near me and lock used to chatter in the clasp. No where else was any good on the frame because of bottle holders or brake/gear cabling and the extra area required by the holder meant some areas were off bounds. Use the kryptonite bracket on the fork. That's nice and out of the way of anything else you want to attach to the bike, yet always there when you stop. Everyone who sees it wonders why they didn't think of that. The style of bracket with a metal fitting on the lock holds the lock quiet & securely -- http://www.bikesomewhere.com/bikesom...4116/19979?g=1 -pm I cant help but thinking that would unbalance the bike horribly. (probably also be obstructed by the front lowriders) |
#10
|
|||
|
|||
securing bike lock to frame or pannier rack
"Penny" wrote in message
... I cant help but thinking that would unbalance the bike horribly. Experience of riding one-panniered bikes a lot suggests that it's quite hard to unbalance a bike. cheers, clive |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Pannier rack for mountain bike | Cheeky[_2_] | UK | 8 | October 1st 07 08:01 PM |
Securing bikes on a (car) rack | Jules | Australia | 23 | September 10th 06 03:01 AM |
? rear pannier rack for a soft tail bike? | C.J.Patten | General | 15 | June 18th 05 06:08 AM |
? rear pannier rack for a soft tail bike? | C.J.Patten | UK | 15 | June 18th 05 06:08 AM |
Pannier bag on top of rack | Michael | General | 1 | October 20th 03 01:40 AM |