A Cycling & bikes forum. CycleBanter.com

Go Back   Home » CycleBanter.com forum » rec.bicycles » Techniques
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

BICYCLE grease



 
 
Thread Tools Display Modes
  #1  
Old February 16th 05, 12:18 AM
external usenet poster
 
Posts: n/a
Default BICYCLE grease

Anything special about bicycle specific grease?

i lit up a galois, sipped the last blue mtn, and turned to the bench
with mozart on the box....

Auto greases function over a broader temp range up to 300-defined as
disc brakes heat, then chassis grease cold-cold as a cycle.

I found that disc brake-chassis grease did not film thickly on rolling
cold hub cones but what thickness is necessary? One assumes the legions
of grease chemists at Lubriplate have this in hand but do they?

Lubriplate, as an example or Dupont mil spec if going to the absurdity,
have more chemists than P.Wood-rumoured to have one chemist in
California-or Finish Line or pro Gold.

Unless the spec cycle greasers bought the formula from the Lubriplate
giants.

Or is it enough to look at the cookbook written by the giant's
chemists, add special qualities-driving up costs to 4-5 times the
Lubriplate tube costs-and supply to the specialty market for COLD
lubrication?

Can A.Muzi recommending Lubriplate where you'll notice there are
several grades for different climates, Mr. Muzi living in the general
direction of the North Pole, and a maybe MIL SPEC aero version
recommended by A.Muzi's resident bell ringer. Can A.Muzi afford
Finish Line Teflon Grease??? Are LBS customer's knowledgeable to
appreciate the possible differences between Lubriplate and FL? If any?

And that leads to the possibilities of COLD MIL SPEC LUBES way superior
to anything P.Wood can cough up: but which one?? There are several.
Search to http://www.globalspec.com/ - products and manufacturers .
I found global spec after discovering Valvoline Synthetic transmission
oil 10-140? Finish Line Epic in the south Florida climate-the Valvo
didn't leave the chain for the rim's brake surface:magic. If Valvo
was good then someone was better.
I bought FL caws the LBS said Tri-Flow was outdated technology and then
Epic is deodorized like the kerosene yawl find in WD-40. The path is
not scientific but it is typical.
But the switch to Finish Line's teflon grease came with an MO to
Nashbar and the finish line of the P.Wood nice green grease tube
running empty. AND after using the FL Teflon/wax compound, vastly
superior to other waxs. The oil must be as good.
Is P.Wood superior to FL or? Objectively, I do not know butt after
comment on this I was immediately insulted at the P.Wood website.
Thanks, Phil, I appreciate the warmth.
So, do cold specs bearing grease rule: YES! It's the disc brake
thing. HOT. Bikes are cold. Something was sacxrificed here for the hot
end. Does Lubriplate give a damn about your Saturn's cold start wear?
Are cycle spec chain lubes better than.... NO. not always. The Valvo is
proof. FL, either directly or turd hand strongly suggests: 1) I shake
the Epic bottle more often, 2) use less oil-but to what end? More
friction? Less throw off? Who knows? Who wants to know? And 3) I ride
under a bus.
Cost is irrelevant: how much grease does the average cyclist use?
OK, you have 20 bikes. Bitch bitch If you have 20 bikes then you can
afford a tube of $25 cold grease. Turn up the boomer, dance around and
apply the $25 grease. Place the bearings into the mush-then turn the
hub upside down...and the bearings stay in!! that's worth the price
of admission.

Put the tube in the fridge first.

Another epistle from a non-expert.

Ads
  #2  
Old February 16th 05, 12:36 AM
external usenet poster
 
Posts: n/a
Default

if this damn computer doesn't stpo btuchering my prose ima gonna burn
it at the stake.

  #3  
Old February 16th 05, 01:58 PM
RonSonic
external usenet poster
 
Posts: n/a
Default

On 15 Feb 2005 16:36:41 -0800, wrote:

if this damn computer doesn't stpo btuchering my prose ima gonna burn
it at the stake.


Looks like you got Red Cloud's keyboard.

Ron


 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
New Bicycle Seat More Healthy for Men Paulpstein Social Issues 3 November 13th 04 11:53 PM
Rec.Bicycles Frequently Asked Questions Posting Part 1/5 Mike Iglesias General 4 October 29th 04 07:11 AM
published helmet research - not troll Frank Krygowski General 1927 October 24th 04 06:39 AM
New bicycle idea Bob Marley General 49 October 7th 04 05:20 AM
cleaning fun...(not) gravelmuncher Australia 119 October 12th 03 04:58 AM


All times are GMT +1. The time now is 08:38 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 CycleBanter.com.
The comments are property of their posters.