|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
How to drill a nightrider 36 rim?
Might be wise if one were to use hockey tape not to drill the outside of the rim, lest water get in and cause the tape to be less sticky? I'm thinking I will drill some smallish holes between the spokes on my nightrider when I have access to both a scale and a drill press in the near future. though the thought of having an extra 50g off the inside of the wheel is appealing.. it'd suck if say you couldn't ride it in the rain though. And scott: if you could put a 'fixie' on the rim drilled I'm sure you could get away with geared. I'd be curious to know if the benefits of lighter wheels are amplified or lessened or stay the same on gears as well. -- flyer ------------------------------------------------------------------------ flyer's Profile: http://www.unicyclist.com/profile/9894 View this thread: http://www.unicyclist.com/thread/72139 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- http://www.usenet.com |
Ads |
#12
|
|||
|
|||
How to drill a nightrider 36 rim?
Might be wise if one were to use hockey tape not to drill the outside of the rim, lest water get in and cause the tape to be less sticky? I'm thinking I will drill some smallish holes between the spokes on my nightrider when I have access to both a scale and a drill press in the near future. though the thought of having an extra 50g off the inside of the wheel is appealing.. it'd suck if say you couldn't ride it in the rain though. And scott: if you could put a 'fixie' on the rim drilled I'm sure you could get away with geared. I'd be curious to know if the benefits of lighter wheels are amplified or lessened or stay the same on gears as well. -- flyer ------------------------------------------------------------------------ flyer's Profile: http://www.unicyclist.com/profile/9894 View this thread: http://www.unicyclist.com/thread/72139 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- http://www.usenet.com |
#13
|
|||
|
|||
How to drill a nightrider 36 rim?
If you use hockey tape, and the rim is drilled all the way through, would water getting in at the tape be an issue? Could you stretch a 24" 'thick' (for drilled rims) rim tape over it and still be okay? I will be drilling outside holes on my nightrider once I have access to both a scale and a drill press, so we'll see. I'm thinking I might not drill out the inside until I test the strength of the outside first. An extra 50 grams off is not bad though, every bit counts for sure. also scott, I think that if it holds up to normal 'fixie' use then it should be fine on a geared. What I'd like to see is what difference a lightweight wheelset makes to geared hubs vs. stock weighted wheels. Does it help more, less or the same? Someday I'll have the gear to answer these questions -- flyer ------------------------------------------------------------------------ flyer's Profile: http://www.unicyclist.com/profile/9894 View this thread: http://www.unicyclist.com/thread/72139 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- http://www.usenet.com |
#14
|
|||
|
|||
How to drill a nightrider 36 rim?
flyer wrote: If you use hockey tape, and the rim is drilled all the way through, would water getting in at the tape be an issue? Could you stretch a 24" 'thick' (for drilled rims) rim tape over it and still be okay? I will be drilling outside holes on my nightrider once I have access to both a scale and a drill press, so we'll see. I'm thinking I might not drill out the inside until I test the strength of the outside first. An extra 50 grams off is not bad though, every bit counts for sure. also scott, I think that if it holds up to normal 'fixie' use then it should be fine on a geared. What I'd like to see is what difference a lightweight wheelset makes to geared hubs vs. stock weighted wheels. Does it help more, less or the same? Someday I'll have the gear to answer these questions On UDC the KH rim strip is only $4 and is pretty stretchy, so you could try it. In theory, the faster you go the more weight matters because as the wheel spins faster, it makes more centrifugal force, and on a guni you go faster so it would matter more than on a fixie. (I think) -- scotthue ------------------------------------------------------------------------ scotthue's Profile: http://www.unicyclist.com/profile/14601 View this thread: http://www.unicyclist.com/thread/72139 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- http://www.usenet.com |
#15
|
|||
|
|||
How to drill a nightrider 36 rim?
flyer wrote: also scott, I think that if it holds up to normal 'fixie' use then it should be fine on a geared. What I'd like to see is what difference a lightweight wheelset makes to geared hubs vs. stock weighted wheels. Does it help more, less or the same? On geared 29er a lightweight wheel makes *way* more difference than on a normal 29er. Joe -- joemarshall ' old pics' (http://tinyurl.com/56yl2f) 'new zealand pics' (http://s119.photobucket.com/albums/o...rshall_photos/) 'new pics' (http://picasaweb.google.co.uk/joemarshall.org.uk) 'Where have I been riding? (GPS) ' (http://tinyurl.com/6fxw5x) ------------------------------------------------------------------------ joemarshall's Profile: http://www.unicyclist.com/profile/1545 View this thread: http://www.unicyclist.com/thread/72139 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- http://www.usenet.com |
#16
|
|||
|
|||
How to drill a nightrider 36 rim?
flyer wrote: If you use hockey tape, and the rim is drilled all the way through, would water getting in at the tape be an issue? Could you stretch a 24" 'thick' (for drilled rims) rim tape over it and still be okay? I doubt you could stretch a 24" rim tape that far. for rim tape you coudl do what most trial bikers do on their 26" wheels and use electrician's tape or duct tape. Or maybe get 26" rim tape, more chance of going all the way round a 36" wheel. Still think it's unlikely. get two and stick em together? -- brendan ------------------------------------------------------------------------ brendan's Profile: http://www.unicyclist.com/profile/13680 View this thread: http://www.unicyclist.com/thread/72139 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- http://www.usenet.com |
#17
|
|||
|
|||
How to drill a nightrider 36 rim?
brendan wrote: I doubt you could stretch a 24" rim tape that far. for rim tape you coudl do what most trial bikers do on their 26" wheels and use electrician's tape or duct tape. Or maybe get 26" rim tape, more chance of going all the way round a 36" wheel. Still think it's unlikely. get two and stick em together? One idea is to get two 24" Kh rim tapes and stick them together. The problem is that they are for the drilled rim so you would probably have to heat them and fuse the plastic together, but I don't know if that would work. -- scotthue ------------------------------------------------------------------------ scotthue's Profile: http://www.unicyclist.com/profile/14601 View this thread: http://www.unicyclist.com/thread/72139 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- http://www.usenet.com |
#18
|
|||
|
|||
How to drill a nightrider 36 rim?
I'll just go the hockey tape route - it's plentiful in canada :P -- flyer ------------------------------------------------------------------------ flyer's Profile: http://www.unicyclist.com/profile/9894 View this thread: http://www.unicyclist.com/thread/72139 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- http://www.usenet.com |
#19
|
|||
|
|||
How to drill a nightrider 36 rim?
Okay, so an update on this. I drilled 34 (decided it was unwise to widen the valve hole or drill a huge hole over the rim join) 3/4" (1.9cm) holes in my nightrider. It looks pretty badass, and I'll post pictures a bit later. I don't have the equipment to put smaller holes on the inside diameter of the rim, but the final weight ended up at 1048g. That's a whopping 68 grams off the stock wheel! Now I just have to rebuild the unicycle, and see if it was worth the trouble and if the weaker rim holds up. After I shave down the tire and swap out my rim strip, I'm looking at a half kilo (providing my tire tread removal estimate is right) of weight off a nightrider tire/rim combo with a 29'er tube. woo! -- flyer ------------------------------------------------------------------------ flyer's Profile: http://www.unicyclist.com/profile/9894 View this thread: http://www.unicyclist.com/thread/72139 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- http://www.usenet.com |
#20
|
|||
|
|||
How to drill a nightrider 36 rim?
Sweet stuff Dave, what are you using to cut the tire? -- ntappin 'how to build a strong comfy saddle from junk.' (http://tinyurl.com/hxcb3) ------------------------------------------------------------------------ ntappin's Profile: http://www.unicyclist.com/profile/10800 View this thread: http://www.unicyclist.com/thread/72139 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- http://www.usenet.com |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Mechanics carefully drill... | PiledHIgher | Techniques | 30 | April 17th 07 05:59 PM |
Can I safely drill through Chromoplastic? | Yonatan Mazuz | Techniques | 9 | January 9th 06 12:12 AM |
Truvativ 5D: Solid cranks to cut and re-drill? | Lister | Techniques | 3 | October 24th 05 05:27 PM |
drill bit size ? and skinny making idea | teachndad | Unicycling | 5 | September 26th 05 10:54 PM |
Drill holes in bike frame? | Pat | General | 11 | September 28th 04 01:36 PM |