A Cycling & bikes forum. CycleBanter.com

Go Back   Home » CycleBanter.com forum » rec.bicycles » Unicycling
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Anyone know the thread size for the crank bolt on a Koxx1 hub



 
 
Thread Tools Display Modes
  #1  
Old January 6th 09, 05:55 PM posted to rec.sport.unicycling
Punyuni
external usenet poster
 
Posts: 2
Default Anyone know the thread size for the crank bolt on a Koxx1 hub


I have a standard white russian, with a Koxx1 hub and cranks. I mangled
the thread when removing the cranks last night, and need to get a tap to
chase the threads. Also need some replacement crank bolts,

Thanks for any help.


--
Punyuni
------------------------------------------------------------------------
Punyuni's Profile: http://www.unicyclist.com/profile/18859
View this thread: http://www.unicyclist.com/thread/75348


Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
http://www.usenet.com
Ads
  #2  
Old January 6th 09, 06:57 PM posted to rec.sport.unicycling
agentQ
external usenet poster
 
Posts: 931
Default Anyone know the thread size for the crank bolt on a Koxx1 hub


M12x1.0

Searching stuff like this tends to be pretty useful as this was just
answered a couple of days ago.

As long as you have the reinforced hub, above are the thread specs for
the crank bolts. The Koxx light hub will be M15x1.0.

Welcome to the forums.


--
agentQ

---
'Uneed Films' (http://www.uneedfilms.com)
------------------------------------------------------------------------
agentQ's Profile: http://www.unicyclist.com/profile/13021
View this thread: http://www.unicyclist.com/thread/75348


Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
http://www.usenet.com
  #3  
Old January 6th 09, 08:14 PM posted to rec.sport.unicycling
OneWheelLess
external usenet poster
 
Posts: 141
Default Anyone know the thread size for the crank bolt on a Koxx1 hub


So you're saying they use larger crankbolts than kh/nimbus hubs??? Are
you sure?


--
OneWheelLess

sigg
------------------------------------------------------------------------
OneWheelLess's Profile: http://www.unicyclist.com/profile/16793
View this thread: http://www.unicyclist.com/thread/75348


Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
http://www.usenet.com
  #4  
Old January 6th 09, 08:30 PM posted to rec.sport.unicycling
agentQ
external usenet poster
 
Posts: 931
Default Anyone know the thread size for the crank bolt on a Koxx1 hub


What? Are -you- sure you're reading things right? Maybe I wrote that
poorly.

Koxx (reinforced) ISIS, Nimbus ISIS, KH ISIS hubs all take M12x1.0
bolts. That is the standard size.

The Koxx "Light" hub takes bigger bolts M15x1.0. Since for the light
hub there is a larger diameter hole drilled out (for more weight loss)
it needs larger diameter bolts, hence the 15s.

Clear?


--
agentQ

---
'Uneed Films' (http://www.uneedfilms.com)
------------------------------------------------------------------------
agentQ's Profile: http://www.unicyclist.com/profile/13021
View this thread: http://www.unicyclist.com/thread/75348


Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
http://www.usenet.com
  #5  
Old January 6th 09, 10:14 PM posted to rec.sport.unicycling
OneWheelLess
external usenet poster
 
Posts: 141
Default Anyone know the thread size for the crank bolt on a Koxx1 hub


ok, got it!
you wrote it fine, i just read it wrong on my blackberry


--
OneWheelLess

sigg
------------------------------------------------------------------------
OneWheelLess's Profile: http://www.unicyclist.com/profile/16793
View this thread: http://www.unicyclist.com/thread/75348


Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
http://www.usenet.com
  #6  
Old January 6th 09, 11:22 PM posted to rec.sport.unicycling
danger_uni
external usenet poster
 
Posts: 343
Default Anyone know the thread size for the crank bolt on a Koxx1 hub


Hey, by the way- check the thread carefully on the tap. M12 x 1.25 is
very common, but M12 x 1.0 is not. I don't know why the 1.0 size was
chosen; it would have made it a lot easier if the bike industry had gone
with a more commonly available thread.

Kris


--
danger_uni
------------------------------------------------------------------------
danger_uni's Profile: http://www.unicyclist.com/profile/21
View this thread: http://www.unicyclist.com/thread/75348


Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
http://www.usenet.com
  #7  
Old January 6th 09, 11:52 PM posted to rec.sport.unicycling
OneWheelLess
external usenet poster
 
Posts: 141
Default Anyone know the thread size for the crank bolt on a Koxx1 hub


danger_uni;1165713 wrote:
Hey, by the way- check the thread carefully on the tap. M12 x 1.25 is
very common, but M12 x 1.0 is not. I don't know why the 1.0 size was
chosen; it would have made it a lot easier if the bike industry had gone
with a more commonly available thread.

Kris




do you know any good sources for a m12x1.0 tap?


--
OneWheelLess

sigg
------------------------------------------------------------------------
OneWheelLess's Profile: http://www.unicyclist.com/profile/16793
View this thread: http://www.unicyclist.com/thread/75348


Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
http://www.usenet.com
  #8  
Old January 7th 09, 12:04 AM posted to rec.sport.unicycling
sxbud138
external usenet poster
 
Posts: 81
Default Anyone know the thread size for the crank bolt on a Koxx1 hub


Snap-on


--
sxbud138
------------------------------------------------------------------------
sxbud138's Profile: http://www.unicyclist.com/profile/17097
View this thread: http://www.unicyclist.com/thread/75348


Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
http://www.usenet.com
  #9  
Old January 7th 09, 12:09 AM posted to rec.sport.unicycling
danger_uni
external usenet poster
 
Posts: 343
Default Anyone know the thread size for the crank bolt on a Koxx1 hub


OneWheelLess;1165753 wrote:
do you know any good sources for a m12x1.0 tap?



Good question; not sure what the answer is. I think they exist
though; a machinist friend of mine has a M10x1.0 tap which I assume was
part of a set at some point. If you find one definitely post about it.
If you've only messed up the outer 1 or 2 threads, you may be able to
fix it without needing a tap; might be worth taking it to a machine shop
for that though.

Kris


--
danger_uni
------------------------------------------------------------------------
danger_uni's Profile: http://www.unicyclist.com/profile/21
View this thread: http://www.unicyclist.com/thread/75348


Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
http://www.usenet.com
  #10  
Old January 7th 09, 12:32 AM posted to rec.sport.unicycling
sxbud138
external usenet poster
 
Posts: 81
Default Anyone know the thread size for the crank bolt on a Koxx1 hub


This one should work.
http://tinyurl.com/7kgq83


--
sxbud138
------------------------------------------------------------------------
sxbud138's Profile: http://www.unicyclist.com/profile/17097
View this thread: http://www.unicyclist.com/thread/75348


Posted Via Usenet.com Premium Usenet Newsgroup Services
----------------------------------------------------------
http://www.usenet.com
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Savage crank bolt? exitandleave Unicycling 3 February 20th 08 07:32 PM
Bolt thread size needed.... Sponge Unicycling 1 June 16th 07 08:59 PM
Stripped Thread on Hex Bolt Robert Lee Techniques 15 January 19th 07 03:00 AM
Crank Bolt Quandry bicycle Techniques 1 December 15th 05 04:31 AM
SPD tension adjuster bolt size? Mike Rocket J. Squirrel Elliott Techniques 2 August 8th 05 02:56 PM


All times are GMT +1. The time now is 11:20 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 CycleBanter.com.
The comments are property of their posters.