|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Chain or Bottom Bracket Creaking Noises
In article ,
Steve Sr. wrote: Hello, I have a fairly new titanium frame bike with an Ultegra 10 speed group. The bike now has about 2800 miles on it. Within the last couple of hundred miles or so it has developed an annoying creaking noise that seems to emanate from the BB area. It also seems to be worse at certain temperatures. Last Saturday's ride started off in the low 50's and the bike was quiet. as the temperature rose into the mid-upper 70's the noise got louder and more frequent. I have also noticed that the noise seems worse at easy/moderate pedal effort. Under heavy load or if I purposely maintain constant force on the drive train the noise lessens or goes away. Most of the time the noise seems synchronized to the crank rotation other times the noise is pretty much constant and almost sounds synchronized with chain rotation. Or maybe it is just that weird Wipperman connect link making its way through the jockey pulleys! I took the bike to the shop and they removed cleaned and then reinstalled the BB. They also used a generous amount of anti-seize on the threads as I could tell from the remnants around the BB cups. I went out at lunch today when it was in the mid-70's as well and the noise was still there. I predict ... it is not the BB. Check the seat post clamp, and pedals. Check the bars and stem. So fixing the usual cause of these squeaks seems to have made absolutely no difference. Any other thoughts on where this noise could be coming from? My only other thought is that the noise is still in the BB only in sealed bearing cup and not where the cup attaches to the frame. Do these external BB designs have this kind of problem? Is it possible that this BB is toast after only 2800 miles? Do chains ever make this kind of noise? The chain has been lubed with Pro-link. Under no load it doesn't appear to have any tight links unless there is still some grit in there that is causing it to bind only under load. -- Michael Press |
Ads |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
What grease to use on bicycle chain? | [email protected] | Techniques | 24 | April 19th 06 08:11 AM |
Bottom bracket length for Race Face Turbine LP used as double | [email protected] | Techniques | 2 | January 27th 06 03:32 PM |
Screamer timing chain idler bracket | bruce | Recumbent Biking | 3 | September 21st 04 04:46 AM |
Bottom Bracket Grindy Noises | Ron Hardin | Techniques | 2 | August 28th 04 09:36 PM |
Creaking bottom bracket | John Hearns | UK | 6 | July 9th 04 11:24 AM |