A Cycling & bikes forum. CycleBanter.com

Go Back   Home » CycleBanter.com forum » rec.bicycles » Racing
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

why I'll never ride sram in any grand tour or one day classic



 
 
Thread Tools Display Modes
  #1  
Old May 5th 11, 07:48 AM posted to rec.bicycles.racing,rec.bicycles.tech
yirgster
external usenet poster
 
Posts: 130
Default why I'll never ride sram in any grand tour or one day classic

A few weeks ago my sram force shift lever (the actual paddle that you
push) broke off on the right shifter. 30 miles to go.

Looking around in the forums, I'm not alone. Maybe an extra 10 grams
or so would have helped.

About 3000-4000 miles.
Ads
  #2  
Old May 5th 11, 02:28 PM posted to rec.bicycles.racing,rec.bicycles.tech
Phil H
external usenet poster
 
Posts: 391
Default why I'll never ride sram in any grand tour or one day classic

On May 4, 11:48*pm, yirgster wrote:
A few weeks ago my sram force shift lever (the actual paddle that you
push) broke off on the right shifter. 30 miles to go.

Looking around in the forums, I'm not alone. Maybe an extra 10 grams
or so would have helped.

About 3000-4000 miles.


I hope you were stuck in a 53/14 with no hills.
Phil H
  #3  
Old May 5th 11, 02:50 PM posted to rec.bicycles.racing,rec.bicycles.tech
Clive George
external usenet poster
 
Posts: 5,394
Default why I'll never ride sram in any grand tour or one day classic

On 05/05/2011 07:48, yirgster wrote:
A few weeks ago my sram force shift lever (the actual paddle that you
push) broke off on the right shifter. 30 miles to go.

Looking around in the forums, I'm not alone. Maybe an extra 10 grams
or so would have helped.

About 3000-4000 miles.


I've bust two campag shift levers so far.
  #4  
Old May 5th 11, 05:01 PM posted to rec.bicycles.racing,rec.bicycles.tech
bfd[_2_]
external usenet poster
 
Posts: 118
Default why I'll never ride sram in any grand tour or one day classic

On May 5, 6:50*am, Clive George wrote:
On 05/05/2011 07:48, yirgster wrote:

A few weeks ago my sram force shift lever (the actual paddle that you
push) broke off on the right shifter. 30 miles to go.


Looking around in the forums, I'm not alone. Maybe an extra 10 grams
or so would have helped.


About 3000-4000 miles.


I've bust two campag shift levers so far.


But you have been able to repair them, right?! Good Luck!
  #5  
Old May 5th 11, 06:12 PM posted to rec.bicycles.racing,rec.bicycles.tech
Fred on a stick
external usenet poster
 
Posts: 249
Default why I'll never ride sram in any grand tour or one day classic

Dumbass,

You'll never ride in any grand tour or one day classic.


  #6  
Old May 5th 11, 06:20 PM posted to rec.bicycles.racing,rec.bicycles.tech
Colin B.[_2_]
external usenet poster
 
Posts: 34
Default why I'll never ride sram in any grand tour or one day classic

In rec.bicycles.tech yirgster wrote:
A few weeks ago my sram force shift lever (the actual paddle that you
push) broke off on the right shifter. 30 miles to go.

Looking around in the forums, I'm not alone. Maybe an extra 10 grams
or so would have helped.

About 3000-4000 miles.


Had a shiny new Shimano MTB brake lever snap off on me - a brake lever!
No torsion on that, just weak metal, bad design, or flaws.

**** happens.

  #7  
Old May 5th 11, 10:10 PM posted to rec.bicycles.racing,rec.bicycles.tech
landotter
external usenet poster
 
Posts: 6,336
Default why I'll never ride sram in any grand tour or one day classic

On May 5, 1:48*am, yirgster wrote:
A few weeks ago my sram force shift lever (the actual paddle that you
push) broke off on the right shifter. 30 miles to go.

Looking around in the forums, I'm not alone. Maybe an extra 10 grams
or so would have helped.

About 3000-4000 miles.


Which model year? They switched to magnesium last year which may have
contributed to gimpiness. I'd contact Sram and see if you can warranty
the levers.
  #8  
Old May 6th 11, 02:12 AM posted to rec.bicycles.racing,rec.bicycles.tech
Snortley
external usenet poster
 
Posts: 46
Default why I'll never ride sram in any grand tour or one day classic

On Thu, 5 May 2011 14:10:07 -0700 (PDT), landotter
wrote:

On May 5, 1:48*am, yirgster wrote:
A few weeks ago my sram force shift lever (the actual paddle that you
push) broke off on the right shifter. 30 miles to go.

Looking around in the forums, I'm not alone. Maybe an extra 10 grams
or so would have helped.

About 3000-4000 miles.


Which model year? They switched to magnesium last year which may have
contributed to gimpiness. I'd contact Sram and see if you can warranty
the levers.



I haven't had any SRAM parts break, but I've wanted spares, and had an
awful time getting them.

They are very generous with exploded diagrams and part numbers, but
the actual pieces are next to impossible to obtain. Some European bike
shops list a few for sale, but if you try to order them, they turn
out to actually not be in stock.

I did once ask a LBS to order axle nuts and a click box for a SRAM
DualDrive hub. The manager had to go through a ton of red tape to get
them. After over six months of runarounds, he finally got the order -
2 sets of nuts (weird size: 10.5 x 1) and washers and 2 click boxes.
When I asked how much, he replied, "No charge; warranteed items."
Can't beat the price, but SRAM's policy is discouraging.

Apparently, they would rather you just swap out a $250 component when
the problem is just one piece worth only a few bucks. For most of
their customers, this isn't a problem. Most of them won't put more
than a few hundred miles on their bikes in a lifetime, so nothing
breaks. For anyone who rides a lot, though, it can be a real
irritation.

I guess the days are long gone since you could get hold of all sorts
of spares. Once upon a time, many manufacturers were at the ready
with every little piece one way or another.

Nowadays, when when we in the West manufacture so little, and use the
dustbin rather than repair anything, this is to be expected. Fairly
often I've found myself in the home of someone who doesn't even have a
screwdriver or pair of pliers. If no one fixes anything, why bother
with parts?

Last month, I was on a lunch break in the middle of a ride. Outside
the diner where I was sitting, there was a long line of patrons at a
table in front of a housewares store. I wondered what was in such
demand that so many were turning out. Then I saw the banner
advertising the deal: bring in you chef's knife for a free sharpening!
These people couldn't even sharpen a kitchen knife! Not a few, but
they were showing up in droves! What the store was offering seemed
like a sign of the times. Would this have been a draw 50 years ago?
Probably not. What will be next? A shoe store offering to tie
shoelaces for free? We're becoming helpless. Last year, on a club
ride, someone's chain broke. No problem, maybe; I had an extra 9-speed
master link with me. I asked the rider how many rear cogs she had. She
didn't know. Probably couldn't sharpen a knife, either. (She had nine
cogs; the chain was fixed.)

You very well may get the same "warranteed item" policy on your
brifter, in which case you're set, though with another brittle paddle.
The way those things tend to be riveted and crimped together, it
probably couldn't be remedied with a replacement part, anyway. Still,
you have to wonder just how much it would set SRAM back to keep a room
stocked with spares, for the few remaining who do have a few tools
around the house, and know how to use them. I reckon if they did, the
payback in their reputation would give them such a competetive edge,
it would be well worth it. But I've got to stop thinking that way;
that's SO twentieth century.






  #9  
Old May 6th 11, 02:32 AM posted to rec.bicycles.racing,rec.bicycles.tech
RonSonic
external usenet poster
 
Posts: 2,658
Default why I'll never ride sram in any grand tour or one day classic


"Snortley" wrote in message
...

Last month, I was on a lunch break in the middle of a ride. Outside
the diner where I was sitting, there was a long line of patrons at a
table in front of a housewares store. I wondered what was in such
demand that so many were turning out. Then I saw the banner
advertising the deal: bring in you chef's knife for a free sharpening!
These people couldn't even sharpen a kitchen knife! Not a few, but
they were showing up in droves! What the store was offering seemed
like a sign of the times. Would this have been a draw 50 years ago?


Fifty years ago there was an old guy on a pedal powered thingawachit who
rode through the neighborhood ringing a bell. He sharpened knives. And
scissors! The sign was real big about the scissors but knives were his core
business.

Not only was it a draw, but a big enough of one to be worth delivering.


  #10  
Old May 6th 11, 04:02 AM posted to rec.bicycles.racing,rec.bicycles.tech
Tºm Shermªn™ °_°[_2_]
external usenet poster
 
Posts: 1,270
Default why I'll never ride SRAM in any grand tour or one day classic

On 5/5/2011 8:12 PM, Snortley wrote:
[...]
Last month, I was on a lunch break in the middle of a ride. Outside
the diner where I was sitting, there was a long line of patrons at a
table in front of a housewares store. I wondered what was in such
demand that so many were turning out. Then I saw the banner
advertising the deal: bring in you chef's knife for a free sharpening!
These people couldn't even sharpen a kitchen knife! Not a few, but
they were showing up in droves! What the store was offering seemed
like a sign of the times. Would this have been a draw 50 years ago?


Think of the hundreds of people milling around with now sharpened
kitchen knives!

Probably not. What will be next? A shoe store offering to tie
shoelaces for free? We're becoming helpless. Last year, on a club
ride, someone's chain broke. No problem, maybe; I had an extra 9-speed
master link with me. I asked the rider how many rear cogs she had. She
didn't know. Probably couldn't sharpen a knife, either. (She had nine
cogs; the chain was fixed.)


With 5 through 8-speed chain, one could remove the broken link and
reconnect the chain with a chain tool. With 9 through 11-speed chain,
one needs a special stupid pin (Shimano) or a quick-link (all).

--
Tºm Shermªn - 42.435731,-83.985007
I am a vehicular cyclist.
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Classic Reynolds 725 Thorn Audax for a Grand Sterling Andre Jute[_2_] Techniques 0 January 12th 11 04:19 PM
Jan Ullrich Grand Tour routebear Racing 2 July 4th 06 12:15 AM
Has anyone besides Savoldelli ever won a Grand Tour Kurgan Gringioni Racing 24 May 9th 06 07:23 AM
Grand Tour winners Bob Martin Racing 9 July 26th 05 07:20 PM
Grand Tour dominance- last ten years [email protected] Racing 11 June 2nd 05 04:12 AM


All times are GMT +1. The time now is 09:58 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 CycleBanter.com.
The comments are property of their posters.