A Cycling & bikes forum. CycleBanter.com

Go Back   Home » CycleBanter.com forum » rec.bicycles » Unicycling
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

what height should i get?



 
 
Thread Tools Display Modes
  #1  
Old December 14th 05, 01:02 AM posted to rec.sport.unicycling
external usenet poster
 
Posts: n/a
Default what height should i get?


hi

I have no clue about unicycling or anything remotely related
to the outdoors or exercise (sorry) but my big brother just loves
anything and everything to do with outside, learning tricks and doing
cool stuff that not everyone else can do (and if it has any risk of
maiming or death, he's right in there!)

.....so, i want to get him a unicycle for christmas (its one of the few
things he hasnt tried yet). the thing is he's 6'2" and a lot of the
ones on ebay (i know, i a cheapskate but hey, im a student) seem to be
pretty small (24" was the tallest i found) so i was wondering what
height i should be looking for and if you could recommend anywhere that
sells them cheap.

Thanx very much

Clare x


--
slackerbeeatch
------------------------------------------------------------------------
slackerbeeatch's Profile: http://www.unicyclist.com/profile/11338
View this thread: http://www.unicyclist.com/thread/45367

Ads
  #2  
Old December 14th 05, 01:30 AM posted to rec.sport.unicycling
external usenet poster
 
Posts: n/a
Default what height should i get?


if money is an issue i would get a 20" torker lx. if money is not an
issue i would get the torker 20" torker dx. 20" are usually the best
to learn with. You should get one along with buying your others. When
I started my friend and I would have competitions to see who could go
farther. I think that watching someone else screwup helps you
not screw up and both of the learners lean quicker


--
unist

HAHA
------------------------------------------------------------------------
unist's Profile: http://www.unicyclist.com/profile/10351
View this thread: http://www.unicyclist.com/thread/45367

  #3  
Old December 14th 05, 01:33 AM posted to rec.sport.unicycling
external usenet poster
 
Posts: n/a
Default what height should i get?


a begginers 24" is probaly just fine, or you could get a 20" and make
sure the seat post is long enough. i dont know where the cheapest place
is but ebay is a good start, hope you find one.

~cheers


--
Radical Reed

If at first you don't suceed, distroy all evidence that you tried

the main reason santa is so jolly is because he knows where all the bad
girls live.
------------------------------------------------------------------------
Radical Reed's Profile: http://www.unicyclist.com/profile/10427
View this thread: http://www.unicyclist.com/thread/45367

  #4  
Old December 14th 05, 02:23 AM posted to rec.sport.unicycling
external usenet poster
 
Posts: n/a
Default what height should i get?


20" and 24" Torkers usually ship with a seatpost suitable for tall
folks. I'm 6'0" and am able to ride comfortably on a 20" DX.

eBay's your best bet for low price, but forget customer service... if
you can afford an extra $10 or $20, go with an on-line retailer (as
opposed to the wholesalers you'll run into on eBay) and you'll have
someone to call if anything's wrong with the uni.

Do a little homework and check the Better Business Bureau file on your
retailer (you can search from the BBB's web site) before making the
purchase... some on-line retailers are dirty crooks and you won't find
out until it's too late!


--
maestro8

Those are my principles. If you don't like those, I have others. --
Groucho Marx
------------------------------------------------------------------------
maestro8's Profile: http://www.unicyclist.com/profile/7871
View this thread: http://www.unicyclist.com/thread/45367

  #5  
Old December 14th 05, 02:26 AM posted to rec.sport.unicycling
external usenet poster
 
Posts: n/a
Default what height should i get?


I wouldn't go for a 20" for the first unicycle. 24" would be just right,
and the stock seatpost should fit anybody.

And with Torker, you cant go wrong. Go for the LX or DX though.


--
forrestunifreak

warning: the above statement is usually not intended to offend anyone.
it has been know to cause warts, ringworm, and diaper rash.
it may contain logic, poltical incorrectyness, pchycological nudity,
and traces of peanuts.you cant read this!
'My gallery' (http://tinyurl.com/bbf9x)

'Seattle Bike Supply' (http://www.seattlebikesupply.com)
------------------------------------------------------------------------
forrestunifreak's Profile: http://www.unicyclist.com/profile/6828
View this thread: http://www.unicyclist.com/thread/45367

  #6  
Old December 14th 05, 02:35 AM posted to rec.sport.unicycling
external usenet poster
 
Posts: n/a
Default what height should i get?


I think you may be mistaking the size of the wheel for the height of the
whole uni. I don't know much about this stuff, but I ride a 20".


--
koebwil
------------------------------------------------------------------------
koebwil's Profile: http://www.unicyclist.com/profile/11308
View this thread: http://www.unicyclist.com/thread/45367

  #7  
Old December 14th 05, 03:02 AM posted to rec.sport.unicycling
external usenet poster
 
Posts: n/a
Default what height should i get?


Im 6'2" and I bought a 26" Torker LX off of Ebay and it fit me
perfect!!
It ran me about $115 after shipping.....not too shabby!

Here's a link to the same one that I bought:
http://tinyurl.com/dsr54


--
babyivan

*NO SLEEP TILL BROOKLYN!*
------------------------------------------------------------------------
babyivan's Profile: http://www.unicyclist.com/profile/11031
View this thread: http://www.unicyclist.com/thread/45367

  #8  
Old December 14th 05, 03:37 AM posted to rec.sport.unicycling
external usenet poster
 
Posts: n/a
Default what height should i get?


Wheel size should not be related to how tall the rider is. Seatpost
length is related to rider height. Tall people can ride 20" unis just
fine, and I've seen people 5'3" on a 36" uni. The larger the wheel, the
faster you go, the smaller the wheel, the more tricks and skills you
can do on it. 20" and 24" are by far the two most common sizes, with
24" being the best for normal riding around town and most tricks. 20"
is great for lots of tricks/skills, but slow for distances. There are
also Munis (mountain unis) which are 24" and Trials unis which are 20"
Mod (fits a 19" rim) but those are both expensive. The Torker LX is the
strongest cheap unicycle out there, and is available in both 20 and 24"
sizes. I own a 20" torker LX and highly recommend it (or the 24"
version).


--
Skippii

One for the Road: Harrisonburg's Unicycle gang.
------------------------------------------------------------------------
Skippii's Profile: http://www.unicyclist.com/profile/7822
View this thread: http://www.unicyclist.com/thread/45367

  #9  
Old December 14th 05, 03:44 AM posted to rec.sport.unicycling
external usenet poster
 
Posts: n/a
Default what height should i get?


I would suggest the Torker LX off of ebay. It's the cheapest decent
unicycle you will find anywhere, I think.

As for the size of unicycle, they are measured in the diameter of the
wheel. So a 24" unicycle has a 24" diameter wheel, which is a good
size to learn on (probably better for his height, too).

If you think your brother will want to learn a lot more than just
riding around, then you may want to get the 20" unicycle. It's better
for tricks.

Hope that helps


--
Spudman

*| B B|* This space owned by Fly ''
(http://www.unicyclist.com/forums/VBGooglemap.php)
*| I O |* This space owned by Frees*TYLER!*
*| L A |* *MERCYME owns this space!!!*
*| L R |* This space owned by unijesse
*|__'-' (www.selectric.org)____'D'
(http://www.cathodecorner.com/nixiewatch/index.html)___|* This space
rendered by forrest
------------------------------------------------------------------------
Spudman's Profile: http://www.unicyclist.com/profile/10752
View this thread: http://www.unicyclist.com/thread/45367

  #10  
Old December 14th 05, 02:02 PM posted to rec.sport.unicycling
external usenet poster
 
Posts: n/a
Default what height should i get?


ok, thank u very much to everyone who replied!

Have a very merry christmas all of you and an excellent 2006


--
slackerbeeatch
------------------------------------------------------------------------
slackerbeeatch's Profile: http://www.unicyclist.com/profile/11338
View this thread: http://www.unicyclist.com/thread/45367

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Saddle height vs. bar height Steve Hodgson UK 11 August 19th 05 10:52 AM
When Is Standover Height Insufficient? Dave Thompson General 20 August 3rd 05 05:41 PM
When Is Standover Height Insufficient? Arthur Harris Techniques 3 August 2nd 05 03:22 PM
Ongoing Saddle Height Adjustment and Results Michael J. Klein Techniques 8 October 1st 04 03:34 AM
About seat height billham Unicycling 4 December 21st 03 03:59 AM


All times are GMT +1. The time now is 09:45 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 CycleBanter.com.
The comments are property of their posters.