|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Buying a used recumbent
I'm going to look at a Vision R-40. Can someone give me technical
information on the bike? I'd like to know whether it is adjustable for riders between 5'6" and 6', the mechanics of adjusting for different size riders, whether the conversion between LWB and SWB is a major modification or simply a matter of switching parts around. I'd also like to know opinions of the bike in general. Thanks -- J Kimmel www.metalinnovations.com "Cuius testiculos habes, habeas cardia et cerebellum." - When you have their full attention in your grip, their hearts and minds will follow. |
Ads |
#2
|
|||
|
|||
John Kimmel wrote:
I'm going to look at a Vision R-40. Can someone give me technical information on the bike? I'd like to know whether it is adjustable for riders between 5'6" and 6', the mechanics of adjusting for different size riders, whether the conversion between LWB and SWB is a major modification or simply a matter of switching parts around. I'd also like to know opinions of the bike in general. ATP Vision is of course out of business, so you are on your own if anything Vision specific breaks. However, most repairs could be made and/or parts replaced by a competent frame builder and machinist, respectively. The bike will fit the height range you mention. Changing seat to pedal distance requires adjusting the boom and changing the chain length. The bolts that secure the boom have an eccentric force applied to them, so they should be replaced after a few adjustments, unless one enjoys drilling and tapping to remove broken bolts. Due to these factors, the Vision 40-series bikes are best suited for use by a single rider. ATP Vision revised the frame design in 1999, lengthening the wheelbase. The earlier models are twitchier, and require more attention to balance and steering when riding. The stock components were also significantly upgraded in 1999. The SWB to LWB conversion is reportedly something that can be done by anyone with basic bicycle mechanic skills in an hour or two. -- Tom Sherman |
#3
|
|||
|
|||
Thanks. Looks like it will be worth the drive to look at it.
Tom Sherman wrote: -- John Kimmel GET YER STINKING PAWS OFF ME YOU DAMN DIRTY APE! |
#4
|
|||
|
|||
"John Kimmel" wrote in message ... Thanks. Looks like it will be worth the drive to look at it. Tom Sherman wrote: -- John Kimmel GET YER STINKING PAWS OFF ME YOU DAMN DIRTY APE! I take it you aren't interested in the used NoCom. skip |
#5
|
|||
|
|||
skip wrote:
"John Kimmel" wrote in message ... GET YER STINKING PAWS OFF ME YOU DAMN DIRTY APE! I take it you aren't interested in the used NoCom. Zoology lesson of the day: Monkeys are not apes. -- Tom Sherman |
#6
|
|||
|
|||
John Kimmel wrote:
Thanks. Looks like it will be worth the drive to look at it. Understand that unless you are one of the physically gifted people who learn new athletic skills with ease, you may find the Vision R-40 (and many other recumbents) hard to ride at first. Patience is required. The first recumbent I tried to ride was a 1998 Vision R-40. I was not able to both steer and balance after half an hour or so of trying. Several months later, after having ridden a RANS Wave for several hundred miles, I was able to ride the same exact R-40 without significant difficulty. -- Tom Sherman |
#7
|
|||
|
|||
"Tom Sherman" wrote in message ... John Kimmel wrote: Thanks. Looks like it will be worth the drive to look at it. Understand that unless you are one of the physically gifted people who learn new athletic skills with ease, you may find the Vision R-40 (and many other recumbents) hard to ride at first. Patience is required. The first recumbent I tried to ride was a 1998 Vision R-40. I was not able to both steer and balance after half an hour or so of trying. Several months later, after having ridden a RANS Wave for several hundred miles, I was able to ride the same exact R-40 without significant difficulty. My God, do you have some physical disability that would cause this? The Vision is my favorite bike of about 10 recumbents that I have. I will admit it was not the first recumbent I ever got, but it presented no problems whatsoever when I first rode it. It is a quick steerer, depending on how you have it set up, but it takes only a few minutes to get used to. I will admit it is one of the shorter SWB recumbents, but there are good reasons for that too. I am very sorry Vision went out of business as I regard it as having the most comfortable recumbent seat ever made. It was a stroke of genius how they designed that seat to be easily adjusted and removed from the frame. -- Regards, Ed Dolan - Minnesota |
#8
|
|||
|
|||
Edward Dolan wrote:
"Tom Sherman" wrote in message ... John Kimmel wrote: Thanks. Looks like it will be worth the drive to look at it. Understand that unless you are one of the physically gifted people who learn new athletic skills with ease, you may find the Vision R-40 (and many other recumbents) hard to ride at first. Patience is required. The first recumbent I tried to ride was a 1998 Vision R-40. I was not able to both steer and balance after half an hour or so of trying. Several months later, after having ridden a RANS Wave for several hundred miles, I was able to ride the same exact R-40 without significant difficulty. My God, do you have some physical disability that would cause this? The Vision is my favorite bike of about 10 recumbents that I have. I will admit it was not the first recumbent I ever got, but it presented no problems whatsoever when I first rode it. It is a quick steerer, depending on how you have it set up, but it takes only a few minutes to get used to. I will admit it is one of the shorter SWB recumbents, but there are good reasons for that too. Read my post again. Note that with some recumbent riding experience I was able to ride the 1998 R-40 "without significant difficulty". My gross motor skills are towards the poor end of the normal range. However, I was able to ride a certain dual ISO 406-mm wheel size Wishbone RT without problems after an adjustment period. This is a bike that has given several experienced recumbent riders problems on their first ride. I am very sorry Vision went out of business as I regard it as having the most comfortable recumbent seat ever made. It was a stroke of genius how they designed that seat to be easily adjusted and removed from the frame. However, care is required in fastening the seat properly. I recall a Vision rider going over backwards on startup, as his seat came loose at the front. -- Tom Sherman |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rec.Bicycles Frequently Asked Questions Posting Part 1/5 | Mike Iglesias | General | 4 | October 29th 04 07:11 AM |
Recumbent history on CD from Dick Ryan | Martin Krieg | Recumbent Biking | 0 | September 30th 04 09:14 PM |
Michigan Recumbent Rally West This Saturday | Wolverbob | Recumbent Biking | 0 | September 10th 04 06:28 PM |
Michigan Recumbent Rally West This Saturday | Wolverbob | Recumbent Biking | 1 | September 10th 04 03:21 AM |
recumbent frustration | Cletus Lee | Recumbent Biking | 48 | July 14th 03 12:00 PM |