|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
all around lubricant?
I was wondering if anyone had thoughts on this? Or is it better to use
diferent / specialized lubricants on different parts of a bike? I was thinking of something along the lines of a spray like wd-40 or something similar. Ken -- It has yet to be proven that intelligence has any survival value. Arthur C. Clarke English physicist & science fiction author (1917 - ) |
Ads |
#2
|
|||
|
|||
Ken asks- I was wondering if anyone had thoughts on this? Or is it better to
use diferent / specialized lubricants on different parts of a bike? I was thinking of something along the lines of a spray like wd-40 or something similar. BRBR I answer-WD-40 is more water displacement and solvent than lube. I use two, a drip bottle of Mobil One for pivots, small threads like brake barrel adjusters, etc and Prolink for the chain. Peter Chisholm Vecchio's Bicicletteria 1833 Pearl St. Boulder, CO, 80302 (303)440-3535 http://www.vecchios.com "Ruote convenzionali costruite eccezionalmente bene" |
#3
|
|||
|
|||
: : I answer-WD-40 is more water displacement and solvent than lube. I use two, a : drip bottle of Mobil One for pivots, small threads like brake barrel adjusters, : etc and Prolink for the chain. : : Peter Chisholm Ah, Mobil One! I never thought of that. I use that in my Accord and when I change the oil, it always comes out as clean as it went in. At $4+ a quart, it's certainly not cheap, but when you compare it to bicycle lubricants, it is. I used 5W-0 in the car. Pat in TX |
#4
|
|||
|
|||
"Ken" writes:
I was wondering if anyone had thoughts on this? Or is it better to use diferent / specialized lubricants on different parts of a bike? I was thinking of something along the lines of a spray like wd-40 or something similar. WD-40 is not a lubricant. Motor oil is an excellent all-around lube for bikes, but you should use grease in the hubs. |
#5
|
|||
|
|||
Ken" kcmarcet"@ wrote:
I was wondering if anyone had thoughts on this? Or is it better to use diferent / specialized lubricants on different parts of a bike? I was thinking of something along the lines of a spray like wd-40 or something similar. Phil Wood oil is perfect for some specialized things, and good enough for everything else. Matt O. |
#6
|
|||
|
|||
RE/
drip bottle of Mobil One Is there something about Mobil One that makes it better than regular engine oil or wasit just at hand? I've got both, but hadn't considered Mobil One for the bike. -- PeteCresswell |
#7
|
|||
|
|||
On Thu, 25 Nov 2004 09:32:45 -0500, "Ken"
wrote: I was wondering if anyone had thoughts on this? Or is it better to use diferent / specialized lubricants on different parts of a bike? I was thinking of something along the lines of a spray like wd-40 or something similar. In my long experience, WD40 is a poor lubricant for high-load items; I somesimes use it solely on low-load stuff like rear der pivots, but even there I find that it's better avoided. (The "WD" in the name stands for "Water Displacement", which is what it was compounded to accomplish; while it can serve as a light lubricant in low-load applications, I've found that it is almost never the best choice for that.) If WD40 is used on a high-load interface, it can actually increase the likelihood of wear and/or siezure; Autozone's stores went through a bunch of loaner gear and bearing pullers as a result of people using WD40 (or clones of it) as the lube on the screw threads. Often, it took as little as three turns under load before the screw's thread was shredded. (Yes, I've seen this happen.) Use the lube appropriate for the item, but if you have nothing else available, then with the exception of those bits which require grease, ordinary $1.50-per-quart motor oil can be safely used as a lubricant for the rest of the moving parts in *most* cases. There are still exceptions; when lubricating a plastic item, try to adhere to the manufacturer's recommendations, as some plastics can be degraded by certain lubricants...and some cables are designed and intended to be used without any fluid lubricant. By the way, this particular topic has been hashed out countless times in this forum, and has resulted in some heated discussions to little or no benefit; everyone has their preferences, and some of the advice that will be offered by some respondents may be directly at odds with others. -- Typoes are a feature, not a bug. Some gardening required to reply via email. Words processed in a facility that contains nuts. |
#8
|
|||
|
|||
On Thu, 25 Nov 2004 17:12:18 GMT, "(Pete Cresswell)" wrote:
RE/ drip bottle of Mobil One Is there something about Mobil One that makes it better than regular engine oil or wasit just at hand? I've got both, but hadn't considered Mobil One for the bike. I've found that it seems less likely to turn into a waxy, gummy goo on exposed surfaces in damp conditions than regular motor oil. Be that as it may, I don't spend a lot of time digging for the one squirt can of Mobil 1 when I just need a drop of oil on something non-critical; the "just plain motor oil" squirters are generally easier to find. -- Typoes are a feature, not a bug. Some gardening required to reply via email. Words processed in a facility that contains nuts. |
#9
|
|||
|
|||
On Thu, 25 Nov 2004 08:50:06 -0600, "Pat" wrote:
: : I answer-WD-40 is more water displacement and solvent than lube. I use two, a : drip bottle of Mobil One for pivots, small threads like brake barrel adjusters, : etc and Prolink for the chain. : : Peter Chisholm Ah, Mobil One! I never thought of that. I use that in my Accord and when I change the oil, it always comes out as clean as it went in. At $4+ a quart, it's certainly not cheap, but when you compare it to bicycle lubricants, it is. I used 5W-0 in the car. I too use Mobil-1, in both my cars and on my bikes. I have a Plews oiler I've owned since I was a kid, and when I change oil in one of my cars I let the bottles drip their last into the oiler. In years and years of cycling I've never run it dry lubricating the bikes. jeverett3ATearthlinkDOTnet http://home.earthlink.net/~jeverett3 |
#10
|
|||
|
|||
"Ken" wrote in message ...
I was wondering if anyone had thoughts on this? Or is it better to use diferent / specialized lubricants on different parts of a bike? I was thinking of something along the lines of a spray like wd-40 or something similar. Ken ********************************************* I've come up with different theories over the years as to what is the best lube to use, also taking price into consideration. My latest is Synthetic motor oil (I feel that the Synthetic attracts less road dirt than Petroleum based) to which I have added some Moly-Dee powder. It looks like 1 quart of the oil and 1/4 lb. of the powder will probably last me for 25 years. Lewis. PS I am car-free, so I do ride quite a bit. ***************** |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Chain Lubricant Options | Jay Richolson | Techniques | 136 | November 14th 04 09:04 PM |
Rec.Bicycles Frequently Asked Questions Posting Part 1/5 | Mike Iglesias | General | 4 | October 29th 04 07:11 AM |
Actual data for the chain cleaning debate | TBGibb | Techniques | 60 | January 11th 04 02:32 AM |