|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Do EVO pads fit in KoolStop holders?
The worn Koolstop pads are 52mm long. Would these fit Koolstop?
https://i.ebayimg.com/images/g/ByQAA...KD/s-l1600.jpg I am a little puzzled by the clip that gets shipped along because Koolstop only has the set screw. -- Regards, Joerg http://www.analogconsultants.com/ |
#2
|
|||
|
|||
Do EVO pads fit in KoolStop holders?
On 4/23/2018 5:52 PM, Joerg wrote:
The worn Koolstop pads are 52mm long. Would these fit Koolstop? https://i.ebayimg.com/images/g/ByQAA...KD/s-l1600.jpg I am a little puzzled by the clip that gets shipped along because Koolstop only has the set screw. Those replace this Kool Stop product: http://www.koolstop.com/english/v_typeholder.html inserts: http://www.koolstop.com/english/v_type.html http://www.koolstop.com/english/v_type2.html If your setup does not include the little wire pins then maybe, maybe not. What is it that you have now? -- Andrew Muzi www.yellowjersey.org/ Open every day since 1 April, 1971 |
#3
|
|||
|
|||
Do EVO pads fit in KoolStop holders?
On 2018-04-23 17:11, AMuzi wrote:
On 4/23/2018 5:52 PM, Joerg wrote: The worn Koolstop pads are 52mm long. Would these fit Koolstop? https://i.ebayimg.com/images/g/ByQAA...KD/s-l1600.jpg I am a little puzzled by the clip that gets shipped along because Koolstop only has the set screw. Those replace this Kool Stop product: http://www.koolstop.com/english/v_typeholder.html inserts: http://www.koolstop.com/english/v_type.html http://www.koolstop.com/english/v_type2.html If your setup does not include the little wire pins then maybe, maybe not. What is it that you have now? They look like this but with the holes in the metal body: https://ixquick-proxy.com/do/spg/sho...13353ae498d1cb You loosen the set screw and the pad slides out the back. However, I don't want Koolstop stuff anymore. It's expensive, the pads wear quickly and to top it off the mounting hardware rusts fast. YGWYPF? I don't think so. -- Regards, Joerg http://www.analogconsultants.com/ |
#4
|
|||
|
|||
Do EVO pads fit in KoolStop holders?
On 4/24/2018 9:47 AM, Joerg wrote:
On 2018-04-23 17:11, AMuzi wrote: On 4/23/2018 5:52 PM, Joerg wrote: The worn Koolstop pads are 52mm long. Would these fit Koolstop? https://i.ebayimg.com/images/g/ByQAA...KD/s-l1600.jpg I am a little puzzled by the clip that gets shipped along because Koolstop only has the set screw. Those replace this Kool Stop product: http://www.koolstop.com/english/v_typeholder.html inserts: http://www.koolstop.com/english/v_type.html http://www.koolstop.com/english/v_type2.html If your setup does not include the little wire pins then maybe, maybe not. What is it that you have now? They look like this but with the holes in the metal body: https://ixquick-proxy.com/do/spg/sho...13353ae498d1cb You loosen the set screw and the pad slides out the back. However, I don't want Koolstop stuff anymore. It's expensive, the pads wear quickly and to top it off the mounting hardware rusts fast. YGWYPF? I don't think so. The EVO inserts you referenced earlier are the wrong part. You probably want these: http://www.koolstop.com/english/dura_type.html Product menu in that link is easy to use. -- Andrew Muzi www.yellowjersey.org/ Open every day since 1 April, 1971 |
#5
|
|||
|
|||
Do EVO pads fit in KoolStop holders?
On 2018-04-24 08:01, AMuzi wrote:
On 4/24/2018 9:47 AM, Joerg wrote: On 2018-04-23 17:11, AMuzi wrote: On 4/23/2018 5:52 PM, Joerg wrote: The worn Koolstop pads are 52mm long. Would these fit Koolstop? https://i.ebayimg.com/images/g/ByQAA...KD/s-l1600.jpg I am a little puzzled by the clip that gets shipped along because Koolstop only has the set screw. Those replace this Kool Stop product: http://www.koolstop.com/english/v_typeholder.html inserts: http://www.koolstop.com/english/v_type.html http://www.koolstop.com/english/v_type2.html If your setup does not include the little wire pins then maybe, maybe not. What is it that you have now? They look like this but with the holes in the metal body: https://ixquick-proxy.com/do/spg/sho...13353ae498d1cb You loosen the set screw and the pad slides out the back. However, I don't want Koolstop stuff anymore. It's expensive, the pads wear quickly and to top it off the mounting hardware rusts fast. YGWYPF? I don't think so. The EVO inserts you referenced earlier are the wrong part. You probably want these: http://www.koolstop.com/english/dura_type.html Product menu in that link is easy to use. Thanks. $10+ is a bit much for those but I saw them on EBay for $8. For mixed-mode use would you recommend dry (black) or wet (salmon)? I usually ride in dry weather but often get caught by rain and just plow through. In the winter when it drizzles I just ride anyhow. -- Regards, Joerg http://www.analogconsultants.com/ |
#6
|
|||
|
|||
Do EVO pads fit in KoolStop holders?
On Tuesday, April 24, 2018 at 9:10:53 AM UTC-7, Joerg wrote:
On 2018-04-24 08:01, AMuzi wrote: On 4/24/2018 9:47 AM, Joerg wrote: On 2018-04-23 17:11, AMuzi wrote: On 4/23/2018 5:52 PM, Joerg wrote: The worn Koolstop pads are 52mm long. Would these fit Koolstop? https://i.ebayimg.com/images/g/ByQAA...KD/s-l1600.jpg I am a little puzzled by the clip that gets shipped along because Koolstop only has the set screw. Those replace this Kool Stop product: http://www.koolstop.com/english/v_typeholder.html inserts: http://www.koolstop.com/english/v_type.html http://www.koolstop.com/english/v_type2.html If your setup does not include the little wire pins then maybe, maybe not. What is it that you have now? They look like this but with the holes in the metal body: https://ixquick-proxy.com/do/spg/sho...13353ae498d1cb You loosen the set screw and the pad slides out the back. However, I don't want Koolstop stuff anymore. It's expensive, the pads wear quickly and to top it off the mounting hardware rusts fast. YGWYPF? I don't think so. The EVO inserts you referenced earlier are the wrong part. You probably want these: http://www.koolstop.com/english/dura_type.html Product menu in that link is easy to use. Thanks. $10+ is a bit much for those but I saw them on EBay for $8. For mixed-mode use would you recommend dry (black) or wet (salmon)? I usually ride in dry weather but often get caught by rain and just plow through. In the winter when it drizzles I just ride anyhow. It doesn't matter -- both pads work fine in wet or dry weather. Get whatever KoolStop pad they have at Sam's Town Cyclery in Shingle Springs. It's right at the end of the trail. Support your local shop. Buy some bottles while you're at it. Quit complaining about $2. -- Jay Beattie. |
#7
|
|||
|
|||
Do EVO pads fit in KoolStop holders?
On Tuesday, April 24, 2018 at 12:10:53 PM UTC-4, Joerg wrote:
On 2018-04-24 08:01, AMuzi wrote: On 4/24/2018 9:47 AM, Joerg wrote: On 2018-04-23 17:11, AMuzi wrote: On 4/23/2018 5:52 PM, Joerg wrote: The worn Koolstop pads are 52mm long. Would these fit Koolstop? https://i.ebayimg.com/images/g/ByQAA...KD/s-l1600.jpg I am a little puzzled by the clip that gets shipped along because Koolstop only has the set screw. Those replace this Kool Stop product: http://www.koolstop.com/english/v_typeholder.html inserts: http://www.koolstop.com/english/v_type.html http://www.koolstop.com/english/v_type2.html If your setup does not include the little wire pins then maybe, maybe not. What is it that you have now? They look like this but with the holes in the metal body: https://ixquick-proxy.com/do/spg/sho...13353ae498d1cb You loosen the set screw and the pad slides out the back. However, I don't want Koolstop stuff anymore. It's expensive, the pads wear quickly and to top it off the mounting hardware rusts fast. YGWYPF? I don't think so. The EVO inserts you referenced earlier are the wrong part. You probably want these: http://www.koolstop.com/english/dura_type.html Product menu in that link is easy to use. Thanks. $10+ is a bit much for those but I saw them on EBay for $8. Good grief! If $2 is that important to you, your business must be failing. Spend less time posting here, spend more time finding clients. Then support your LBS. - Frank Krygowski |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Koolstop cartridge pads not fitting | [email protected] | UK | 5 | September 7th 09 04:25 PM |
Grey Koolstop pads | John Ampleforth | Techniques | 6 | February 2nd 07 05:24 PM |
Koolstop brake pads | Joel | Techniques | 9 | January 6th 07 09:49 PM |
Koolstop pads installation Q. | kabes | Techniques | 1 | June 8th 05 03:56 PM |
KoolStop Brake Pads | kingsley | Australia | 2 | October 5th 04 11:30 PM |