#1
|
|||
|
|||
Ping Carla A-G
So I am getting the run around about the rebound adjustment rod from the
online dealer. I know I can get one from Marz eventually but I just need to tweak the rebound a little. Can I take the top cap off and get an alan wrench in there? If so what size? How long? Thanks for all your knowlege and help Carla. |
Ads |
#2
|
|||
|
|||
Ping Carla A-G
"Loomer" wrote in message
ink.net... So I am getting the run around about the rebound adjustment rod from the online dealer. I know I can get one from Marz eventually but I just need to tweak the rebound a little. Can I take the top cap off and get an alan wrench in there? If so what size? How long? Thanks for all your knowlege and help Carla. I don't know the exact length of the hex wrench that you would need. You have to remove the dust cap on the left fork leg and compress the fork. You will be able to see the adjustment seat if you put a flashlight in it. If you have a hex wrench that's long enough to put into the adjustment seat, make sure it fits nice and tight so you won't strip it, or you will be really screwed. Turning clockwise will increase the rebound. Counterclockwise will decrease the rebound. - CA-G Can-Am Girls Kick Ass! |
#3
|
|||
|
|||
Ping Carla A-G
"Carla A-G" wrote in message
... I don't know the exact length of the hex wrench that you would need. You have to remove the dust cap on the left fork leg and compress the fork. You will be able to see the adjustment seat if you put a flashlight in it. If you have a hex wrench that's long enough to put into the adjustment seat, make sure it fits nice and tight so you won't strip it, or you will be really screwed. Turning clockwise will increase the rebound. Counterclockwise will decrease the rebound. - CA-G Can-Am Girls Kick Ass! Thank you very much. I think I will try this. I guess if I mess it up I could buy new internals and then I would upgrade them to a better fork anyway. Thank you. Why is the manual so bad? No part numbers, no exploded internal view, no specific oil tuning recommendations, no nothing of real value... Why is the manual so bad? Where can I get an actual tech manual? |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Ping: Carla A-G | SuperClydesdale | Mountain Biking | 14 | December 4th 03 04:04 PM |
PING the az super go guy | Penny S | Mountain Biking | 16 | September 16th 03 05:00 PM |
Carla.... you owe me.... | Slacker | Mountain Biking | 2 | August 30th 03 02:57 AM |
PING JD!! | voodoo | Mountain Biking | 25 | August 18th 03 04:13 AM |