|
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
seat clamp size for nimus II frame?
delcypher wrote: Despite unicycle.com listing it that way (it does make it easier to buy stuff from their site though) a 25.4 seatpost will not work with a 25.4 clamp as the seat tube is thicker the 0mm as the majority of seatclamp manufactures (let's ignore UDC here) refer to the external diameter of the seat tube( as in the frame tubing) not the seatpost because not all frame tubing is the same thickness. if the tube is about 1mm thick and the seatpost is 25.4, it'll probably be something from 27.4 (accounting both sides of the tube) upwards. If the bike shop will let you pop down there with your unicycle and get them to measure accurately the external diameter of your frame and then go from there. ignoring UDC everything i have said still applies. you are right a 25.4 seatpost clamp's ID is not 25.4 actually most seatpost clamps are 2 layered in the middle (one over the seat post and one over the frame) so should we call it a 25.4and 27.4 seat post clamp to confuse us more? it is designed to work with a 25.4 frame and 25.4 seatpost. which makes total sense. and if you want to be technicall. a 25.4 ID frame and and a 25.4 OD seatpost would not work. because a minescule layer of metal would have to take up the same space. so should we make the seatpost 25.39999999(repeating)? and their is nothing wrong with taking the uni into a bike shop. -- torkerdx gordito8me wrote: it's like running across the highway at rush hour. Dangerous, stupid, but not really that fun. Unicaw89 wrote: Koxx rapes Torker hard! skianduniaddict wrote: never give 4 teenagers a camera... they go crazy ------------------------------------------------------------------------ torkerdx's Profile: http://www.unicyclist.com/profile/12543 View this thread: http://www.unicyclist.com/thread/62478 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- ** SPEED ** RETENTION ** COMPLETION ** ANONYMITY ** ---------------------------------------------------------- http://www.usenet.com |
Ads |
#12
|
|||
|
|||
seat clamp size for nimus II frame?
sorry I forgot to ask because I just remembered occassionally seat clamp manufacturers actually have clamp size etched on the clamp. Have you taken the original clamp off and taken a look all over the clamp to see if it's size is written on it anywhere? -- delcypher ------------------------------------------------------------------------ delcypher's Profile: http://www.unicyclist.com/profile/14909 View this thread: http://www.unicyclist.com/thread/62478 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- ** SPEED ** RETENTION ** COMPLETION ** ANONYMITY ** ---------------------------------------------------------- http://www.usenet.com |
#13
|
|||
|
|||
seat clamp size for nimus II frame?
here is proof supporting what I said, we all know KH's are 27.2, well, UDC lists the clamp size as 32mm. here's the link http://www.unicycle.com/shopping/shopexd.asp?id=1032 -- kerosian I used to get high on life, until I built up a tolerance, so now I unicycle. Yay! Pamba Mountain b*ke race July 22nd, wish me luck! ------------------------------------------------------------------------ kerosian's Profile: http://www.unicyclist.com/profile/13944 View this thread: http://www.unicyclist.com/thread/62478 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- ** SPEED ** RETENTION ** COMPLETION ** ANONYMITY ** ---------------------------------------------------------- http://www.usenet.com |
#14
|
|||
|
|||
seat clamp size for nimus II frame?
kerosian wrote: here is proof supporting what I said, we all know KH's are 27.2, well, UDC lists the clamp size as 32mm. here's the link http://www.unicycle.com/shopping/shopexd.asp?id=1032 NO! UDC says"Aluminum construction in black with Kris Holm logo on the front, 32mm internal diameter, weighs 68g. These clamps will only fit the Aluminium KH frames." They list the ID as 32. so what is your point? delcypher: never bothered. i can tell what it fits by looking at it. -- torkerdx gordito8me wrote: it's like running across the highway at rush hour. Dangerous, stupid, but not really that fun. Unicaw89 wrote: Koxx rapes Torker hard! skianduniaddict wrote: never give 4 teenagers a camera... they go crazy ------------------------------------------------------------------------ torkerdx's Profile: http://www.unicyclist.com/profile/12543 View this thread: http://www.unicyclist.com/thread/62478 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- ** SPEED ** RETENTION ** COMPLETION ** ANONYMITY ** ---------------------------------------------------------- http://www.usenet.com |
#15
|
|||
|
|||
seat clamp size for nimus II frame?
here it is again, but it seems like they variate between both methods, between the OD of the seat tube, or the OD of the seatpost, they use both at different times Here it is my way http://www.unicycle.com/shopping/shopexd.asp?id=245 and your way http://www.unicycle.com/shopping/shopexd.asp?id=928 -- kerosian I used to get high on life, until I built up a tolerance, so now I unicycle. Yay! Pamba Mountain b*ke race July 22nd, wish me luck! ------------------------------------------------------------------------ kerosian's Profile: http://www.unicyclist.com/profile/13944 View this thread: http://www.unicyclist.com/thread/62478 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- ** SPEED ** RETENTION ** COMPLETION ** ANONYMITY ** ---------------------------------------------------------- http://www.usenet.com |
#16
|
|||
|
|||
seat clamp size for nimus II frame?
@torkerDX - - It's true that most seatclamps have two interal diamters, the larger one is the important one. The smaller int. dia. is the collar which stops the clamp sliding down the frame. 'So should we call it a 25.4 and 27.4 clamp to confuse us more?' - I'm affraid we don't have much choice because that is the way seat clamp manufactures measure it. Personally I think it's better that way as not all seat tubing is the same thickness which means a 25.4 seatpost will not always go with same clamp. 'because a minescule layer of metal' - the frame is not minescule it's probably about 1mm thick which if you count both sides of the seat tubing(frame) is 2mm so the clamp would need to be about 2mm bigger than the seatpost, making the clamp 27.4mm. That is not a minescule difference. @thejdw - Personally I think 28.6mm is probably the right size assuming your frame takes a 25.4mm seatpost as when I worked for a bike shop in the past a 28.6mm clamp always went with the bikes that had a 25.4mm seatpost (the seatpost size will written on your seatpost by the way, near the bottom underneath the safety mark. -- delcypher ------------------------------------------------------------------------ delcypher's Profile: http://www.unicyclist.com/profile/14909 View this thread: http://www.unicyclist.com/thread/62478 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- ** SPEED ** RETENTION ** COMPLETION ** ANONYMITY ** ---------------------------------------------------------- http://www.usenet.com |
#17
|
|||
|
|||
seat clamp size for nimus II frame?
this thread is not worth argueing. i am right. i know i am right. maybe i am not getting my point across. at this point do i really care you don't believe i am right? no @thejdw take it into a bike shop to get the size seat post clamp you need. or just get a 25.4 which is what you need -- torkerdx gordito8me wrote: it's like running across the highway at rush hour. Dangerous, stupid, but not really that fun. Unicaw89 wrote: Koxx rapes Torker hard! skianduniaddict wrote: never give 4 teenagers a camera... they go crazy ------------------------------------------------------------------------ torkerdx's Profile: http://www.unicyclist.com/profile/12543 View this thread: http://www.unicyclist.com/thread/62478 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- ** SPEED ** RETENTION ** COMPLETION ** ANONYMITY ** ---------------------------------------------------------- http://www.usenet.com |
#18
|
|||
|
|||
seat clamp size for nimus II frame?
Is it me or does that come across as slightly arrogant and conceited? Ah well seeing as we're going nowhere slowly, I suggest as torkerdx has said to go the bike shop, they should be able to sort something out for you. -@thejdw I still personally thick you'll be needing a 28.6mm clamp or round about that area. Let us no how it goes so we can settle this argument properly. -- delcypher ------------------------------------------------------------------------ delcypher's Profile: http://www.unicyclist.com/profile/14909 View this thread: http://www.unicyclist.com/thread/62478 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- ** SPEED ** RETENTION ** COMPLETION ** ANONYMITY ** ---------------------------------------------------------- http://www.usenet.com |
#19
|
|||
|
|||
seat clamp size for nimus II frame?
torkerdx wrote: for the frame, seat post, and seat post clamp you use the same number. for the nimbus 2 frame it is a 25.4 frame. referring to the ID (inner diameter). for the seat post it is a 25.4 referring to the OD and the clamp is also 25.4 referring to the size post it holds. so you need a 25.4 seat post clamp Just a quick note in case anyone finds this in the search. The advice above is wrong. Do not follow it if you want to buy something that works on your frame, you'll end up buying something too small, and being screwed. A 25.4 frame refers to the ID of the frame, correct. A 25.4 post refers to the OD of the post. But the clamp sizes are measured in terms of the inner diameter of the clamp. That is why when you look at 'this seatpost' (http://tinyurl.com/2nbv5z) and 'these seat clamps' (http://tinyurl.com/297332), the numbers for the seat clamps are all slightly bigger than the numbers for seatposts. If this wasn't the case, frame materials that use different thicknesses, would have to have different clamps, you'd have say a 25.4 aluminium frame clamp, a 25.4 steel frame clamp, a 25.4 really fat steel frame clamp etc etc. Joe -- joemarshall my pics http://gallery.unicyclist.com/albuq44 ------------------------------------------------------------------------ joemarshall's Profile: http://www.unicyclist.com/profile/1545 View this thread: http://www.unicyclist.com/thread/62478 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- ** SPEED ** RETENTION ** COMPLETION ** ANONYMITY ** ---------------------------------------------------------- http://www.usenet.com |
#20
|
|||
|
|||
seat clamp size for nimus II frame?
delcypher wrote: Is it me or does that come across as slightly arrogant and conceited? Ah well seeing as we're going nowhere slowly, I suggest as torkerdx has said to go the bike shop, they should be able to sort something out for you. -@thejdw I still personally thick you'll be needing a 28.6mm clamp or round about that area. Let us no how it goes so we can settle this argument properly. I'm gona order a 28.6mm, I'll tell you if it works -- thejdw kington99 wrote: A hobnob is an oaty biscuit, the fact that they don't exist in america just goes to show that you have no culinary heritage don't follow Jesus, follow me! ------------------------------------------------------------------------ thejdw's Profile: http://www.unicyclist.com/profile/13230 View this thread: http://www.unicyclist.com/thread/62478 Posted Via Usenet.com Premium Usenet Newsgroup Services ---------------------------------------------------------- ** SPEED ** RETENTION ** COMPLETION ** ANONYMITY ** ---------------------------------------------------------- http://www.usenet.com |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Torker LX bearing size and seatpost clamp size?? | onefiftyfour | Unicycling | 2 | March 23rd 07 12:20 PM |
Seat post size for Felt TT frame? | Kimba | Techniques | 1 | September 15th 05 12:48 PM |
2004 Torker LX seat post clamp size | digigal1 | Unicycling | 1 | March 25th 05 01:45 AM |
Clamp size front derailleur Cannondale Caad 5 frame | gazelle_nl | Techniques | 2 | August 17th 04 05:23 PM |
Lyte Rider seat post clamp size? | The Munieer | Unicycling | 2 | March 10th 04 08:28 PM |