A Cycling & bikes forum. CycleBanter.com

Go Back   Home » CycleBanter.com forum » rec.bicycles » Unicycling
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Cleaning



 
 
Thread Tools Display Modes
  #1  
Old July 12th 05, 04:54 AM
Aidaeolin
external usenet poster
 
Posts: n/a
Default Cleaning


I just took my uni on my first muni ride and there was mud everywhere.
Now I'm home and my uni is covered in mud. I have a '05 KH/Onza hub and
crankset w/ Wellgo pedals. I took the frame off and wiped down the
outside of the bearings. Tons of mud came off but a lot off grease came
off with it. Should I grease up the bearings? Is there more I should do
to the bearings? Are there other parts of my uni that I should clean?


--
Aidaeolin
------------------------------------------------------------------------
Aidaeolin's Profile: http://www.unicyclist.com/profile/10354
View this thread: http://www.unicyclist.com/thread/41823

Ads
  #2  
Old July 12th 05, 05:59 AM
U-Turn
external usenet poster
 
Posts: n/a
Default Cleaning


Unless your bearings feel gritty or won't turn, just wipe everything
down, put a little grease on the metal surfaces of the bearings to
counteract rust, put it back together, and go ride!

The main thing about a MUni is to get it dirty and have fun doing it.
Bearings are cheap and easy to replace.

When I was riding off-road a lot I was always too tired afterwards to do
a lot of uni cleaning. That's probably the ideal situation


--
U-Turn - Cool water for the flame

Weep in the dojo... laugh on the battlefield.
'LiveWire Unicycles' (http://www.livewireunicycles.com)
'Strongest Coker Wheel in the World'
(http://www.unicyclist.com/gallery/albup39)
'29er Tire Study' (http://u-turn.unicyclist.com/29erTireStudy/)
'New York Unicycle Club' (http://www.newyorkunicycle.com)
-- Dave Stockton
------------------------------------------------------------------------
U-Turn's Profile: http://www.unicyclist.com/profile/691
View this thread: http://www.unicyclist.com/thread/41823

  #3  
Old July 12th 05, 09:20 AM
john_childs
external usenet poster
 
Posts: n/a
Default Cleaning


I just use a utility brush to brush off the mud. Then I let what is
left dry and then go over it with the brush again. Don't get too fussy
about getting all the dirt off. I just get enough of the mud off so it
doesn't make a mess in my car and then get enough of the dried mud off
so it doesn't make a mess at home.

Don't wash it with a power sprayer. You'll get water forced into places
where it shouldn't be and you'll wash away grease. Don't bother with
washing it off with a low pressure hose either, no need. Just brush off
the mud.

If you were just wiping the exterior and some grease came off then
that's fine. Probably just grease that had oozed out during assembly.
If you're taking things apart and wiping away grease then you're
probably wiping away grease that is supposed to be there.

A dirty muni is a happy muni.


--
john_childs - Guinness Mojo

john_childs (att) hotmail (dott) com
Gallery: '' (http://gallery.unicyclist.com/john_childs)
' Unicycling Bookmark List' (http://backcountry.unicyclist.com/) ::
'World Clock' (http://tinyurl.com/a99y3) 'Click Me'
(http://tinyurl.com/7lvbu)
------------------------------------------------------------------------
john_childs's Profile: http://www.unicyclist.com/profile/449
View this thread: http://www.unicyclist.com/thread/41823

  #4  
Old July 12th 05, 09:37 AM
Catboy
external usenet poster
 
Posts: n/a
Default Cleaning


If you ever ride through alot of water, or in the snow/rain, rinse your
muni off in the shower to prevent rust. then just lighty pat it down
with a towel.


--
Catboy - I enjoy the taste of dirt!!!

'I have the amazing power to talk to cats! =^.^='
(http://gallery.unicyclist.com/Catboy)

'UPD T-Shirts FOR SALE SOON!!! (Click Me)'
(http://gallery.unicyclist.com/album661)

------------------------------------------------------------------------
Catboy's Profile: http://www.unicyclist.com/profile/2042
View this thread: http://www.unicyclist.com/thread/41823

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Chain cleaning and lubrication questions Rural QLD CC Mountain Biking 10 July 26th 04 04:26 AM
Actual data for the chain cleaning debate TBGibb Techniques 60 January 11th 04 02:32 AM
cleaning bikes in the winter Doug Purdy General 25 December 22nd 03 11:22 PM
Steam cleaning experiment: Failure! B. Sanders General 4 August 14th 03 08:25 AM
Yet another thread on chain cleaning asqui Techniques 25 August 1st 03 07:24 PM


All times are GMT +1. The time now is 06:09 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2004-2022 CycleBanter.com.
The comments are property of their posters.