#1
|
|||
|
|||
Bolts
Folks,
i've a 10 year old XT rear mech that i needs new Jockey wheel bolts for.Anyone know what size they are?.Regards |
Ads |
#2
|
|||
|
|||
Bolts
On Apr 28, 8:31 am, "Graham FM" wrote:
Folks, i've a 10 year old XT rear mech that i needs new Jockey wheel bolts for.Anyone know what size they are?.Regards Your LBS should have an old parts bin with stuff like that. JD |
#3
|
|||
|
|||
Bolts
I haven't been able to get them at local or even distant bike shops.Thanks
for your reply. "JD" wrote in message oups.com... On Apr 28, 8:31 am, "Graham FM" wrote: Folks, i've a 10 year old XT rear mech that i needs new Jockey wheel bolts for.Anyone know what size they are?.Regards Your LBS should have an old parts bin with stuff like that. JD |
#4
|
|||
|
|||
Bolts
On Apr 28, 11:31 am, "Graham FM" wrote:
Folks, i've a 10 year old XT rear mech that i needs new Jockey wheel bolts for.Anyone know what size they are?.Regards XT in that year used Haversham 250T's, 36 pitch with a dynaflux head. You could substitute a Rectocon 48B, 20 over 10 with a 3/32 backlash. $3.98 for a pack of 10 at Bike City. www.bikecity.rectocon/html |
#5
|
|||
|
|||
Bolts
Would you describe those bolts as M5's?
"The real Duty-Honor-Country" wrote in message oups.com... On Apr 28, 11:31 am, "Graham FM" wrote: Folks, i've a 10 year old XT rear mech that i needs new Jockey wheel bolts for.Anyone know what size they are?.Regards XT in that year used Haversham 250T's, 36 pitch with a dynaflux head. You could substitute a Rectocon 48B, 20 over 10 with a 3/32 backlash. $3.98 for a pack of 10 at Bike City. www.bikecity.rectocon/html |
#6
|
|||
|
|||
Bolts
On Apr 29, 1:44 pm, "Graham FM" wrote:
I haven't been able to get them at local or even distant bike shops.Thanks for your reply. The problem with trying to use a regular hardware type bolt would be where the threads stop, keeping one from over-tightening and the wheel turning free. JD |
#7
|
|||
|
|||
Bolts
The real Duty-Honor-Country wrote:
On Apr 28, 11:31 am, "Graham FM" wrote: Folks, i've a 10 year old XT rear mech that i needs new Jockey wheel bolts for.Anyone know what size they are?.Regards XT in that year used Haversham 250T's, 36 pitch with a dynaflux head. You could substitute a Rectocon 48B, 20 over 10 with a 3/32 backlash. $3.98 for a pack of 10 at Bike City. I'll take two! |
#8
|
|||
|
|||
Bolts
On Apr 29, 7:37 pm, "Bill Sornson" wrote:
The real Duty-Honor-Country wrote: On Apr 28, 11:31 am, "Graham FM" wrote: Folks, i've a 10 year old XT rear mech that i needs new Jockey wheel bolts for.Anyone know what size they are?.Regards XT in that year used Haversham 250T's, 36 pitch with a dynaflux head. You could substitute a Rectocon 48B, 20 over 10 with a 3/32 backlash. $3.98 for a pack of 10 at Bike City. I'll take two! For some reason, Duty-Honor-Country's reply doesn't show up in Google Groups. Must be because, you know, it's on-topic, useful, uncritical, and (I'm assuming) correct information. I don't know if a 15,000 word LSD-driven Neo-Nazi diatribe was snipped from the bolt info, but even if it was, bravo! /s |
#9
|
|||
|
|||
Bolts
Scott Gordo wrote:
On Apr 29, 7:37 pm, "Bill Sornson" wrote: The real Duty-Honor-Country wrote: On Apr 28, 11:31 am, "Graham FM" wrote: Folks, i've a 10 year old XT rear mech that i needs new Jockey wheel bolts for.Anyone know what size they are?.Regards XT in that year used Haversham 250T's, 36 pitch with a dynaflux head. You could substitute a Rectocon 48B, 20 over 10 with a 3/32 backlash. $3.98 for a pack of 10 at Bike City. I'll take two! For some reason, Duty-Honor-Country's reply doesn't show up in Google Groups. Must be because, you know, it's on-topic, useful, uncritical, and (I'm assuming) correct information. I don't know if a 15,000 word LSD-driven Neo-Nazi diatribe was snipped from the bolt info, but even if it was, bravo! /s The only thing I understood was "$3.98 for a pack of 10 at Bike City". Rectocon sounds like it could hurt. -- o-o-o-o Ride-A-Lot o-o-o-o www.schnauzers.ws |
#10
|
|||
|
|||
Bolts
On Apr 30, 9:06 am, Scott Gordo wrote:
On Apr 29, 7:37 pm, "Bill Sornson" wrote: The real Duty-Honor-Country wrote: On Apr 28, 11:31 am, "Graham FM" wrote: Folks, i've a 10 year old XT rear mech that i needs new Jockey wheel bolts for.Anyone know what size they are?.Regards XT in that year used Haversham 250T's, 36 pitch with a dynaflux head. You could substitute a Rectocon 48B, 20 over 10 with a 3/32 backlash. $3.98 for a pack of 10 at Bike City. I'll take two! For some reason, Duty-Honor-Country's reply doesn't show up in Google Groups. Must be because, you know, it's on-topic, useful, uncritical, and (I'm assuming) correct information. Fish on! It's all made up crap. The bolt is a form of M5 (5mm by .8 thread). JD had it right ... it is a specific type of M5. The bolt is 16mm long with only 4mm of thread. The other 12mm is a smooth section where the bushing rides. Assuming that the RD is 10 years old, then it is an 8sp M-739 ... the bolt head is stepped to fit into the outer cage and uses a 3mm allen to tighten. For the OP, your best bet is to salvage. I doubt that Shimano has those parts available. You might try Part # Y-53M 24000 or Y-56954900. The first is a pulley bolt from an M-760 XT (2004)... but it was the same part for the M-750 (1999). The second is from a 2004 tourney, but the head looks similar to the M-739. Look at the backside of the parallelogram, the model number will be stamped there. snip R |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Pinch Bolts | maximus unius | Unicycling | 8 | October 29th 06 05:49 PM |
Loose bolts | Tim Morin | Unicycling | 5 | May 28th 06 10:41 AM |
Pinch bolts | Dukester | Techniques | 10 | May 31st 05 03:23 PM |
Titanium hex bolts. | Ne> | Mountain Biking | 19 | January 3rd 05 05:05 PM |
Ti bolts | JJ | Recumbent Biking | 2 | December 22nd 04 04:29 PM |