#151
|
|||
|
|||
Bike adjustments
On 12/11/2019 11:22 PM, Andre Jute wrote:
On Thursday, December 12, 2019 at 1:51:03 AM UTC, jbeattie wrote: On Wednesday, December 11, 2019 at 3:25:10 PM UTC-8, Andre Jute wrote: On Wednesday, December 11, 2019 at 10:28:47 PM UTC, lou.h...@xxxx wrote: On Wednesday, December 11, 2019 at 2:08:32 PM UTC+1, sms wrote: On 12/10/2019 1:58 PM, wrote: snip What is your dream bike Frank (honest question) and what is custom on that frame or bike? Pretty much everyone in the U.S. dreams of a Rivendell of some sort. You are kidding, no? Lou The problem with our American friends is that they aren't kidding. Those clowns who wanted me to choose a Paramount "mixte" over a Utopia Kranich really meant it. Why not? Because it a fraud, all display and no function as you own link proves at a single glance: https://www.flickr.com/photos/waterf...57629483332191 You must be getting senile, Jay, forgetting things like this. I explained in riveting detail why a Waterford bike isn't good enough. See "WHY A WATERFORD BIKE IS A JOKE An investigation consequent on being hounded by American roadies", at: https://groups.google.com/forum/#!to...TIP0%5B1-25%5D Muzi could get one for you. You clowns are damaging Muzi's business by making me explain again and again why I wouldn't be see dead on a Waterford bike. Pick it up in Wisconsin and see the world. With the right component group, that thing would be a total chick magnet. -- Jay Beattie. I'll leave you to your shallow dreams about being a "chick magnet". Andre Jute Lord, save me from wannabe promoters of American chrome plating Waterford doesn't offer chroming (the industry having been fatally regulated). Those are American cast stainless polished lugs and ends. -- Andrew Muzi www.yellowjersey.org/ Open every day since 1 April, 1971 |
Ads |
#152
|
|||
|
|||
Bike adjustments
On Thu, 12 Dec 2019 08:53:30 -0600, AMuzi wrote:
On 12/11/2019 11:22 PM, Andre Jute wrote: On Thursday, December 12, 2019 at 1:51:03 AM UTC, jbeattie wrote: On Wednesday, December 11, 2019 at 3:25:10 PM UTC-8, Andre Jute wrote: On Wednesday, December 11, 2019 at 10:28:47 PM UTC, lou.h...@xxxx wrote: On Wednesday, December 11, 2019 at 2:08:32 PM UTC+1, sms wrote: On 12/10/2019 1:58 PM, wrote: snip What is your dream bike Frank (honest question) and what is custom on that frame or bike? Pretty much everyone in the U.S. dreams of a Rivendell of some sort. You are kidding, no? Lou The problem with our American friends is that they aren't kidding. Those clowns who wanted me to choose a Paramount "mixte" over a Utopia Kranich really meant it. Why not? Because it a fraud, all display and no function as you own link proves at a single glance: https://www.flickr.com/photos/waterf...57629483332191 You must be getting senile, Jay, forgetting things like this. I explained in riveting detail why a Waterford bike isn't good enough. See "WHY A WATERFORD BIKE IS A JOKE An investigation consequent on being hounded by American roadies", at: https://groups.google.com/forum/#!to...TIP0%5B1-25%5D Muzi could get one for you. You clowns are damaging Muzi's business by making me explain again and again why I wouldn't be see dead on a Waterford bike. Pick it up in Wisconsin and see the world. With the right component group, that thing would be a total chick magnet. -- Jay Beattie. I'll leave you to your shallow dreams about being a "chick magnet". Andre Jute Lord, save me from wannabe promoters of American chrome plating Waterford doesn't offer chroming (the industry having been fatally regulated). Those are American cast stainless polished lugs and ends. I wonder. Could one successfully silver solder chrome plated objects? And would the chromium stay shiny? My initial thoughts would be no, but admittedly I have never tried it. -- cheers, John B. |
#153
|
|||
|
|||
Bike adjustments
On Thursday, December 12, 2019 at 2:53:29 PM UTC, AMuzi wrote:
On 12/11/2019 11:22 PM, Andre Jute wrote: On Thursday, December 12, 2019 at 1:51:03 AM UTC, jbeattie wrote: On Wednesday, December 11, 2019 at 3:25:10 PM UTC-8, Andre Jute wrote: On Wednesday, December 11, 2019 at 10:28:47 PM UTC, lou.h...@xxxx wrote: On Wednesday, December 11, 2019 at 2:08:32 PM UTC+1, sms wrote: On 12/10/2019 1:58 PM, lou.holtman wrote: snip What is your dream bike Frank (honest question) and what is custom on that frame or bike? Pretty much everyone in the U.S. dreams of a Rivendell of some sort. You are kidding, no? Lou The problem with our American friends is that they aren't kidding. Those clowns who wanted me to choose a Paramount "mixte" over a Utopia Kranich really meant it. Why not? Because it a fraud, all display and no function as you own link proves at a single glance: https://www.flickr.com/photos/waterf...57629483332191 You must be getting senile, Jay, forgetting things like this. I explained in riveting detail why a Waterford bike isn't good enough. See "WHY A WATERFORD BIKE IS A JOKE An investigation consequent on being hounded by American roadies", at: https://groups.google.com/forum/#!to...TIP0%5B1-25%5D Muzi could get one for you. You clowns are damaging Muzi's business by making me explain again and again why I wouldn't be see dead on a Waterford bike. Pick it up in Wisconsin and see the world. With the right component group, that thing would be a total chick magnet. -- Jay Beattie. I'll leave you to your shallow dreams about being a "chick magnet". Andre Jute Lord, save me from wannabe promoters of American chrome plating Waterford doesn't offer chroming (the industry having been fatally regulated). Those are American cast stainless polished lugs and ends. -- Andrew Muzi www.yellowjersey.org/ Open every day since 1 April, 1971 Thanks, Andrew. There I think we can leave the subject of Waterford bikes. They've suffered enough for the pushy bad judgement of RBT roadies. Andre Jute Enough is enough |
#154
|
|||
|
|||
Bike adjustments
On 12/12/2019 5:02 PM, John B. wrote:
On Thu, 12 Dec 2019 08:53:30 -0600, AMuzi wrote: On 12/11/2019 11:22 PM, Andre Jute wrote: On Thursday, December 12, 2019 at 1:51:03 AM UTC, jbeattie wrote: On Wednesday, December 11, 2019 at 3:25:10 PM UTC-8, Andre Jute wrote: On Wednesday, December 11, 2019 at 10:28:47 PM UTC, lou.h...@xxxx wrote: On Wednesday, December 11, 2019 at 2:08:32 PM UTC+1, sms wrote: On 12/10/2019 1:58 PM, wrote: snip What is your dream bike Frank (honest question) and what is custom on that frame or bike? Pretty much everyone in the U.S. dreams of a Rivendell of some sort. You are kidding, no? Lou The problem with our American friends is that they aren't kidding. Those clowns who wanted me to choose a Paramount "mixte" over a Utopia Kranich really meant it. Why not? Because it a fraud, all display and no function as you own link proves at a single glance: https://www.flickr.com/photos/waterf...57629483332191 You must be getting senile, Jay, forgetting things like this. I explained in riveting detail why a Waterford bike isn't good enough. See "WHY A WATERFORD BIKE IS A JOKE An investigation consequent on being hounded by American roadies", at: https://groups.google.com/forum/#!to...TIP0%5B1-25%5D Muzi could get one for you. You clowns are damaging Muzi's business by making me explain again and again why I wouldn't be see dead on a Waterford bike. Pick it up in Wisconsin and see the world. With the right component group, that thing would be a total chick magnet. -- Jay Beattie. I'll leave you to your shallow dreams about being a "chick magnet". Andre Jute Lord, save me from wannabe promoters of American chrome plating Waterford doesn't offer chroming (the industry having been fatally regulated). Those are American cast stainless polished lugs and ends. I wonder. Could one successfully silver solder chrome plated objects? And would the chromium stay shiny? My initial thoughts would be no, but admittedly I have never tried it. -- cheers, John B. No, one cannot. Moreover at bicycle temperatures (nickel-free silver braze or low temp bronze) brazing near chrome can be destructive to the steel. Welding over chrome is worse but brazing is bad enough. -- Andrew Muzi www.yellowjersey.org/ Open every day since 1 April, 1971 |
#155
|
|||
|
|||
Bike adjustments
On Thursday, December 12, 2019 at 11:02:08 PM UTC, John B. wrote:
I wonder. Could one successfully silver solder chrome plated objects? And would the chromium stay shiny? D'you mean to tell us, Slow Johnny, that you were never a hot rodder? For surely every hot rodder is aware that American chromium plating was so shoddy that almost all of it had to be scraped off and rechromed by people who knew what they were doing in the polishing and the base layers of copper and nickel that American platers either skimped or skipped. My initial thoughts would be no, but admittedly I have never tried it. I daresay you're right. Solder sticks to only a limited number of metals, and cheap plating doesn't play nice with heat. Andre Jute Surprised to discover a many as... one whole item Slow Johnny doesn't know everything about |
#156
|
|||
|
|||
Bike adjustments
On Thu, 12 Dec 2019 17:46:01 -0600, AMuzi wrote:
On 12/12/2019 5:02 PM, John B. wrote: On Thu, 12 Dec 2019 08:53:30 -0600, AMuzi wrote: On 12/11/2019 11:22 PM, Andre Jute wrote: On Thursday, December 12, 2019 at 1:51:03 AM UTC, jbeattie wrote: On Wednesday, December 11, 2019 at 3:25:10 PM UTC-8, Andre Jute wrote: On Wednesday, December 11, 2019 at 10:28:47 PM UTC, lou.h...@xxxx wrote: On Wednesday, December 11, 2019 at 2:08:32 PM UTC+1, sms wrote: On 12/10/2019 1:58 PM, wrote: snip What is your dream bike Frank (honest question) and what is custom on that frame or bike? Pretty much everyone in the U.S. dreams of a Rivendell of some sort. You are kidding, no? Lou The problem with our American friends is that they aren't kidding. Those clowns who wanted me to choose a Paramount "mixte" over a Utopia Kranich really meant it. Why not? Because it a fraud, all display and no function as you own link proves at a single glance: https://www.flickr.com/photos/waterf...57629483332191 You must be getting senile, Jay, forgetting things like this. I explained in riveting detail why a Waterford bike isn't good enough. See "WHY A WATERFORD BIKE IS A JOKE An investigation consequent on being hounded by American roadies", at: https://groups.google.com/forum/#!to...TIP0%5B1-25%5D Muzi could get one for you. You clowns are damaging Muzi's business by making me explain again and again why I wouldn't be see dead on a Waterford bike. Pick it up in Wisconsin and see the world. With the right component group, that thing would be a total chick magnet. -- Jay Beattie. I'll leave you to your shallow dreams about being a "chick magnet". Andre Jute Lord, save me from wannabe promoters of American chrome plating Waterford doesn't offer chroming (the industry having been fatally regulated). Those are American cast stainless polished lugs and ends. I wonder. Could one successfully silver solder chrome plated objects? And would the chromium stay shiny? My initial thoughts would be no, but admittedly I have never tried it. -- cheers, John B. No, one cannot. Moreover at bicycle temperatures (nickel-free silver braze or low temp bronze) brazing near chrome can be destructive to the steel. Welding over chrome is worse but brazing is bad enough. Some years ago I was interested in chrome plating a bike and did some research on hydrogen embrittlement related to chrome plating. In short, hydrogen embrittlement is primarily associated with high tensile steels when chrome plated and can be reduced or eliminating by baking at fairly high temperatures (375 - 430 deg. F). I found that Columbus tubes fall at or below the hardness that seems to be the boundary above which hydrogen embrittlement treatment becomes critical. -- cheers, John B. |
#157
|
|||
|
|||
Bike adjustments
On 12/12/19 3:02 pm, Ralph Barone wrote:
James wrote: With disc brakes you would only need to flip the axle quick release and take the wheel out, and not need to fiddle with the brakes at all. Yeah, but if I unintentionally squeeze my brake levers on my canti equipped bike with no wheel installed, it’s a pretty easy recovery. It's a non-issue with mechanical disc brakes too. You might be thinking of hydraulics? I'm not so keen on them, like I'm not so keen on electronic gear shifting. -- JS |
#158
|
|||
|
|||
Bike adjustments
On Wed, 11 Dec 2019 06:50:44 +0700, John B.
wrote: Didn't I hear you exclaiming the merits of your slide rule? While cleaning his room, my spouse found a stash of slide rules including, I believe, mine. After some thought, I put them into the glass-front bookcase with the history books. If I recall correctly, multiplication was quite easy, and I could probably still do it. Our physicics tests were to "slide rule accuracy", that is, you needed only to show enough digits to prove that you'd done the right things to the right numbers. (Mine was a cheap bamboo rule and didn't give useful answers, except for sanity-testing.) One short cut I took proved that laziness can pay. We were given a four-place table that we were supposed to interpolate to five places. Instead of practicing interpolation as I was supposed to do, I bought a five-place table. And shortly after I graduated, interpolation went out of style. Nowadays I use my calculators only for money and miles per hour. The first two or three digits don't cut it any more. (Well, on mph, two digits are plenty!) -- Joy Beeson joy beeson at comcast dot net http://wlweather.net/PAGEJOY/ |
#159
|
|||
|
|||
Bike adjustments
On 12/12/19 4:04 pm, Frank Krygowski wrote:
How many bikes have you not yet converted to discs? I thought I had mentioned that I am happy not to have disc brakes on my road bike. In fact on neither road bike. I don't ride them in wet weather at all often, and I don't carry loads with them. Rims last years and all weather braking performance is a non-issue. My gravel/touring bike and MTB are both disc brake bikes though, and IMHO it is a good choice for those bikes. My wife has a city/commuter bike with flat bars and disc brakes. They're hydraulic levers and calipers. Having had to play with them, I don't really like them. I prefer cable disc brakes. -- JS |
#160
|
|||
|
|||
Bike adjustments
On Thu, 12 Dec 2019 23:16:41 -0500, Joy Beeson
wrote: On Wed, 11 Dec 2019 06:50:44 +0700, John B. wrote: Didn't I hear you exclaiming the merits of your slide rule? While cleaning his room, my spouse found a stash of slide rules including, I believe, mine. After some thought, I put them into the glass-front bookcase with the history books. If I recall correctly, multiplication was quite easy, and I could probably still do it. Our physicics tests were to "slide rule accuracy", that is, you needed only to show enough digits to prove that you'd done the right things to the right numbers. (Mine was a cheap bamboo rule and didn't give useful answers, except for sanity-testing.) One short cut I took proved that laziness can pay. We were given a four-place table that we were supposed to interpolate to five places. Instead of practicing interpolation as I was supposed to do, I bought a five-place table. And shortly after I graduated, interpolation went out of style. Nowadays I use my calculators only for money and miles per hour. The first two or three digits don't cut it any more. (Well, on mph, two digits are plenty!) At one point I was in charge of calculating percentages on the Wing's fleet of aircraft. This was before the days of electric calculators and I thought a slip stick would work so bought one only to find that they wouldn't indicate to the last decimal point, or perhaps more accurately, that I couldn't read them to the last decimal point. And believe me that as far as the Wing Commander is concerned 30.5 and 30.59 are different numbers when reporting to higher headquarters (30.59 can be rounded to 31 :-) I remember a story that at Wright-Patterson AFB (one of the development bases) they had a 10 foot long slide rule in a temperature controlled room for doing really accurate calculations I don't know whether that is true, however it does sound possible. -- cheers, John B. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
USE Alien adjustments | Chris M | Techniques | 7 | February 19th 06 02:43 PM |
Some adjustments to bars | Ken M | General | 14 | January 1st 06 05:40 PM |
derailer adjustments | Bob Rutledge | Techniques | 2 | December 10th 05 08:42 PM |
Derailleur adjustments | D.M. Procida | UK | 2 | August 8th 04 12:03 PM |
derailleur adjustments on new bike? | Monique Y. Mudama | Mountain Biking | 22 | June 28th 04 05:32 PM |