|
|
|||||||
|
|
Thread Tools | Display Modes |
|
#1
August 16th 04, 04:06 PM
|
|||
|
|||
Adjusting bearings Mavic Helium Wheels
Hi
Can anybody point me to a site with info on how to adjust the bearings on Mavic Helium's? Mavic apparently doesn't want us costumers to know these things. Thanks Gerard Remery 
|
| Ads |
|
#2
August 16th 04, 07:45 PM
|
|||
|
|||
|
"gazelle_nl" wrote in message ... Hi Can anybody point me to a site with info on how to adjust the bearings on Mavic Helium's? Mavic apparently doesn't want us costumers to know these things. Thanks Gerard Remery http://www.tech-mavic.com/uk/sources...mFrontAxle.pdf Adjust the bearing free play (install the wheel to the frame and put the bike down on the floor) : The adjuster nut contacts the external face of the bearing when using hub wrench M40123. Repeat the operation if the adjustment doesn't seem to be optimum. Bill
|
|
#3
August 16th 04, 07:45 PM
|
|||
|
|||
|
"gazelle_nl" wrote in message ... Hi Can anybody point me to a site with info on how to adjust the bearings on Mavic Helium's? Mavic apparently doesn't want us costumers to know these things. Thanks Gerard Remery http://www.tech-mavic.com/uk/sources...mFrontAxle.pdf Adjust the bearing free play (install the wheel to the frame and put the bike down on the floor) : The adjuster nut contacts the external face of the bearing when using hub wrench M40123. Repeat the operation if the adjustment doesn't seem to be optimum. Bill
|
|
#4
August 16th 04, 07:51 PM
|
|||
|
|||
|
"Bill" wrote in message
... "gazelle_nl" wrote in message ... Hi Can anybody point me to a site with info on how to adjust the bearings on Mavic Helium's? Mavic apparently doesn't want us costumers to know these things. Thanks Gerard Remery http://www.tech-mavic.com/uk/sources...mFrontAxle.pdf Name: "mavic-com" PW: "dealer" Clamp wheel in dropouts. Tighten ring with the indentations with pin wrench that came with wheels until there is no lateral play in the wheel. Wheel should turn freely with no binding. Adjust the bearing free play (install the wheel to the frame and put the bike down on the floor) : The adjuster nut contacts the external face of the bearing when using hub wrench M40123. Repeat the operation if the adjustment doesn't seem to be optimum. Bill
|
|
#5
August 16th 04, 07:51 PM
|
|||
|
|||
|
"Bill" wrote in message
... "gazelle_nl" wrote in message ... Hi Can anybody point me to a site with info on how to adjust the bearings on Mavic Helium's? Mavic apparently doesn't want us costumers to know these things. Thanks Gerard Remery http://www.tech-mavic.com/uk/sources...mFrontAxle.pdf Name: "mavic-com" PW: "dealer" Clamp wheel in dropouts. Tighten ring with the indentations with pin wrench that came with wheels until there is no lateral play in the wheel. Wheel should turn freely with no binding. Adjust the bearing free play (install the wheel to the frame and put the bike down on the floor) : The adjuster nut contacts the external face of the bearing when using hub wrench M40123. Repeat the operation if the adjustment doesn't seem to be optimum. Bill
|
|
#6
August 16th 04, 09:15 PM
|
|||
|
|||
|
Thanks Bill
I found the Mavic tech site, but couldn't get into it without a password. Gerard "Bill" wrote in message ... "Bill" wrote in message ... "gazelle_nl" wrote in message ... Hi Can anybody point me to a site with info on how to adjust the bearings on Mavic Helium's? Mavic apparently doesn't want us costumers to know these things. Thanks Gerard Remery http://www.tech-mavic.com/uk/sources...mFrontAxle.pdf Name: "mavic-com" PW: "dealer" Clamp wheel in dropouts. Tighten ring with the indentations with pin wrench that came with wheels until there is no lateral play in the wheel. Wheel should turn freely with no binding. Adjust the bearing free play (install the wheel to the frame and put the bike down on the floor) : The adjuster nut contacts the external face of the bearing when using hub wrench M40123. Repeat the operation if the adjustment doesn't seem to be optimum. Bill
|
|
#7
August 16th 04, 09:15 PM
|
|||
|
|||
|
Thanks Bill
I found the Mavic tech site, but couldn't get into it without a password. Gerard "Bill" wrote in message ... "Bill" wrote in message ... "gazelle_nl" wrote in message ... Hi Can anybody point me to a site with info on how to adjust the bearings on Mavic Helium's? Mavic apparently doesn't want us costumers to know these things. Thanks Gerard Remery http://www.tech-mavic.com/uk/sources...mFrontAxle.pdf Name: "mavic-com" PW: "dealer" Clamp wheel in dropouts. Tighten ring with the indentations with pin wrench that came with wheels until there is no lateral play in the wheel. Wheel should turn freely with no binding. Adjust the bearing free play (install the wheel to the frame and put the bike down on the floor) : The adjuster nut contacts the external face of the bearing when using hub wrench M40123. Repeat the operation if the adjustment doesn't seem to be optimum. Bill
|
|
#8
August 16th 04, 10:23 PM
|
|||
|
|||
|
"gazelle_nl" wrote in message ... Thanks Bill I found the Mavic tech site, but couldn't get into it without a password. Gerard Per my second post: Username mavic-com Password dealer
|
|
#9
August 16th 04, 10:23 PM
|
|||
|
|||
|
"gazelle_nl" wrote in message ... Thanks Bill I found the Mavic tech site, but couldn't get into it without a password. Gerard Per my second post: Username mavic-com Password dealer
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| FS: Spinergy R1 and Mavic Helium Wheels | Tom Spahr | Marketplace | 0 | August 28th 04 10:48 PM |
Linear Mode
