|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Help needed with Campy hub
We are trying to change a hub on a Campy Zonda wheel, 07, from a
Shimano freehub to Campy. We have a Campy hub from a different Campy wheel (also supposedly 07) but the mechanic said that it will not fit due to being a different diameter. He said that it's a 9s hub, not 10s, and that the two bubs \bodies are not compatible. I believe he's rather full of it, especially since the new cassette body comes from a new Campy wheel, not one that's 5+ years old. Is there an experienced Campy mechanic in the house who can shed some light on this? Peter? Anyone? Thanks in advance. |
Ads |
#2
|
|||
|
|||
Help needed with Campy hub
|
#3
|
|||
|
|||
Help needed with Campy hub
On Jul 28, 5:18 pm, wrote:
We are trying to change a hub on a Campy Zonda wheel, 07, from a Shimano freehub to Campy. We have a Campy hub from a different Campy wheel (also supposedly 07) but the mechanic said that it will not fit due to being a different diameter. He said that it's a 9s hub, not 10s, and that the two bubs \bodies are not compatible. I believe he's rather full of it, especially since the new cassette body comes from a new Campy wheel, not one that's 5+ years old. Is there an experienced Campy mechanic in the house who can shed some light on this? Peter? Anyone? Thanks in advance. What model does the other freehub come from? Zonda is a cup and cone hub. Vento, Scirocco and Khamsin are all cartridge bearing hubs, and the freehub bodies aren't compatible. You want FH-BO015, but you could be using FH-SC015. |
#4
|
|||
|
|||
Help needed with Campy hub
On Jul 29, 12:49 am, Hank Wirtz wrote:
On Jul 28, 5:18 pm, wrote: We are trying to change a hub on a Campy Zonda wheel, 07, from a Shimano freehub to Campy. We have a Campy hub from a different Campy wheel (also supposedly 07) but the mechanic said that it will not fit due to being a different diameter. He said that it's a 9s hub, not 10s, and that the two bubs \bodies are not compatible. I believe he's rather full of it, especially since the new cassette body comes from a new Campy wheel, not one that's 5+ years old. Is there an experienced Campy mechanic in the house who can shed some light on this? Peter? Anyone? Thanks in advance. What model does the other freehub come from? Zonda is a cup and cone hub. Vento, Scirocco and Khamsin are all cartridge bearing hubs, and the freehub bodies aren't compatible. You want FH-BO015, but you could be using FH-SC015. See post on -marketplace. Freehubs for Campagnolo did change for 2007, with the freehub one piece and not with a screwed in pawl carrier BUT if the hubs are 2007 and both have aluminum axles, freehubs, including the shimano compatible one, are interchangable. 2007 freehubs cannot go onto 2006 axles BUT 2006 and earlier freehubs can go onto newer axles. No such animal as a '9s' Campagnolo freehub. If it's 9s, it's also 10s. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Campy part no's needed for freehub upgrade | Tim Graichen | Techniques | 0 | October 6th 06 06:47 PM |
Advice needed for cranks that use self-extracting crank bolts for Campy 9 spd | Alan | Techniques | 6 | July 6th 05 10:54 PM |
Campy Threaded Headset Help Needed | Phil B. | Techniques | 1 | May 23rd 05 05:56 AM |
DESPERATELY NEEDED:::Campy 8sp lockring... Got one? | Jay Swann | Marketplace | 2 | September 25th 04 02:12 PM |
Campy MTB Parts - help ID'ing needed! | Gemma Kernich | Techniques | 4 | September 4th 04 03:46 AM |