|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Ringo Star mounted correctly?
Hi,
I had my mechanic install a Ringo Star by USE. I am not sure the lower half of the unit (without text) has been installed the right way. Could anyone who uses it too tell me whether it's upside down or not? http://www.dk-forenserver.de/tour/at...id=10289&stc=1 Thanks, Derk |
Ads |
#2
|
|||
|
|||
I had my mechanic install a Ringo Star by USE.
I am not sure the lower half of the unit (without text) has been installed the right way. Could anyone who uses it too tell me whether it's upside down or not? I think it's installed correctly, the non-visible side of the lower ring should be much more angled than the part showing, see: http://www.use1.com/ringgostar/fitti...structions.htm "Derk" wrote in message ... Hi, I had my mechanic install a Ringo Star by USE. I am not sure the lower half of the unit (without text) has been installed the right way. Could anyone who uses it too tell me whether it's upside down or not? http://www.dk-forenserver.de/tour/at...id=10289&stc=1 Thanks, Derk |
#3
|
|||
|
|||
"Derk" wrote in message
... Hi, I had my mechanic install a Ringo Star by USE. I am not sure the lower half of the unit (without text) has been installed the right way. Could anyone who uses it too tell me whether it's upside down or not? http://www.dk-forenserver.de/tour/at...id=10289&stc=1 Thanks, Derk I think the part with the screw sitting on the headset is upside down. look at the install instructions. http://www.use1.com/ringgostar/fitti...structions.htm |
#4
|
|||
|
|||
"Derk" wrote in message
... Hi, I had my mechanic install a Ringo Star by USE. I am not sure the lower half of the unit (without text) has been installed the right way. Could anyone who uses it too tell me whether it's upside down or not? http://www.dk-forenserver.de/tour/at...id=10289&stc=1 Thanks, Derk I think the part with the screw sitting on the headset is upside down. look at the install instructions. http://www.use1.com/ringgostar/fitti...structions.htm |
#5
|
|||
|
|||
It looks OK to me. I just installed mine this weekend, it's very easy. It's lighter and much easier to use than a compression plug. Adjustmnets only require a 2mm allen wrench (USE should provide this as most people don't have one), not a 4mm as instuctions state. If you don't have one already, I highly recommend buying one, Performance and Supergo have them for $25. -- PSC |
#6
|
|||
|
|||
It looks OK to me. I just installed mine this weekend, it's very easy. It's lighter and much easier to use than a compression plug. Adjustmnets only require a 2mm allen wrench (USE should provide this as most people don't have one), not a 4mm as instuctions state. If you don't have one already, I highly recommend buying one, Performance and Supergo have them for $25. -- PSC |
#7
|
|||
|
|||
I had my mechanic install a Ringo Star by USE.
I am not sure the lower half of the unit (without text) has been installed the right way. Could anyone who uses it too tell me whether it's upside down or not? I think it's installed correctly, the non-visible side of the lower ring should be much more angled than the part showing, see: http://www.use1.com/ringgostar/fitti...structions.htm Looking at it a second time i'm actually sure it's ok. If it was installed the wrong way the adjusment bolt would be on the other side ot the ring. "Ronald" wrote in message ... I had my mechanic install a Ringo Star by USE. I am not sure the lower half of the unit (without text) has been installed the right way. Could anyone who uses it too tell me whether it's upside down or not? I think it's installed correctly, the non-visible side of the lower ring should be much more angled than the part showing, see: http://www.use1.com/ringgostar/fitti...structions.htm "Derk" wrote in message ... Hi, I had my mechanic install a Ringo Star by USE. I am not sure the lower half of the unit (without text) has been installed the right way. Could anyone who uses it too tell me whether it's upside down or not? http://www.dk-forenserver.de/tour/at...id=10289&stc=1 Thanks, Derk |
#8
|
|||
|
|||
I had my mechanic install a Ringo Star by USE.
I am not sure the lower half of the unit (without text) has been installed the right way. Could anyone who uses it too tell me whether it's upside down or not? I think it's installed correctly, the non-visible side of the lower ring should be much more angled than the part showing, see: http://www.use1.com/ringgostar/fitti...structions.htm Looking at it a second time i'm actually sure it's ok. If it was installed the wrong way the adjusment bolt would be on the other side ot the ring. "Ronald" wrote in message ... I had my mechanic install a Ringo Star by USE. I am not sure the lower half of the unit (without text) has been installed the right way. Could anyone who uses it too tell me whether it's upside down or not? I think it's installed correctly, the non-visible side of the lower ring should be much more angled than the part showing, see: http://www.use1.com/ringgostar/fitti...structions.htm "Derk" wrote in message ... Hi, I had my mechanic install a Ringo Star by USE. I am not sure the lower half of the unit (without text) has been installed the right way. Could anyone who uses it too tell me whether it's upside down or not? http://www.dk-forenserver.de/tour/at...id=10289&stc=1 Thanks, Derk |
#9
|
|||
|
|||
PSC wrote:
Adjustmnets only require a 2mm allen wrench (USE should provide this as most people don't have one), not a 4mm as instuctions state. I noticed that too. A bit of text on the lower ring would take all the guessing out of it. I read somewhere that the 2mm bolt didn't hold and the thread was damaged easily. It sure looks tiny to me too. Thanks, Derk |
#10
|
|||
|
|||
PSC wrote:
Adjustmnets only require a 2mm allen wrench (USE should provide this as most people don't have one), not a 4mm as instuctions state. I noticed that too. A bit of text on the lower ring would take all the guessing out of it. I read somewhere that the 2mm bolt didn't hold and the thread was damaged easily. It sure looks tiny to me too. Thanks, Derk |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FS: Giro Pneumo Lone Star Edition helmet w/ helmet pod | Robbie Brown | Marketplace | 0 | November 18th 04 03:44 PM |
Ringo Star | Derk | Techniques | 1 | August 7th 04 03:27 PM |
Star fangled nut problem | Paul Davis | UK | 8 | July 18th 04 08:30 PM |