A Cycling & bikes forum. CycleBanter.com

Go Back   Home » CycleBanter.com forum » rec.bicycles » Techniques
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

DT Swiss 460 rims



 
 
Thread Tools Display Modes
  #1  
Old September 15th 20, 05:50 PM posted to rec.bicycles.tech
Mark Cleary[_3_]
external usenet poster
 
Posts: 48
Default DT Swiss 460 rims

These are tubeless compatible do they have traditional spoke access holes?
Deacon Mark
  #2  
Old September 15th 20, 06:00 PM posted to rec.bicycles.tech
Tom Kunich[_2_]
external usenet poster
 
Posts: 812
Default DT Swiss 460 rims

On Tuesday, September 15, 2020 at 9:50:35 AM UTC-7, wrote:
These are tubeless compatible do they have traditional spoke access holes?
Deacon Mark

https://wheelbuilder.com/dt-swiss-r-460-rim/
  #3  
Old September 15th 20, 06:13 PM posted to rec.bicycles.tech
JBeattie
external usenet poster
 
Posts: 5,090
Default DT Swiss 460 rims

On Tuesday, September 15, 2020 at 9:50:35 AM UTC-7, Mark Cleary wrote:
These are tubeless compatible do they have traditional spoke access holes?
Deacon Mark


Yes, I've built a few wheels on these, and they are a good value rim, straight out of the box and pretty good at the seams. They are not impervious to spoke hole cracking. My son cracked a few holes. I think I had them at recommended tension, but my son subjected them to some serious load cycles.

-- Jay Beattie.


  #4  
Old September 15th 20, 06:52 PM posted to rec.bicycles.tech
Lou Holtman[_5_]
external usenet poster
 
Posts: 512
Default DT Swiss 460 rims

Op dinsdag 15 september 2020 om 18:50:35 UTC+2 schreef :
These are tubeless compatible do they have traditional spoke access holes?
Deacon Mark


yes.
  #5  
Old September 15th 20, 10:28 PM posted to rec.bicycles.tech
Mark Cleary[_3_]
external usenet poster
 
Posts: 48
Default DT Swiss 460 rims

On Tuesday, September 15, 2020 at 12:52:21 PM UTC-5, wrote:
Op dinsdag 15 september 2020 om 18:50:35 UTC+2 schreef :
These are tubeless compatible do they have traditional spoke access holes?
Deacon Mark

yes.


Well more questions. I used the DT Swiss spoke calculator and input the hubs dimensions that I measure myself to make certain. It is a basic Novotec f842sb hub. According the the calculations it says 282 for DS and 287 for NON DS. That seems to be more than usual of 2 mm difference. I am sure of my measuring does that seem reasonable to have 5mm difference?

Deacon Mark
  #6  
Old September 16th 20, 12:05 AM posted to rec.bicycles.tech
Mark J.
external usenet poster
 
Posts: 722
Default DT Swiss 460 rims

On 9/15/2020 2:28 PM, Mark Cleary wrote:
On Tuesday, September 15, 2020 at 12:52:21 PM UTC-5, wrote:
Op dinsdag 15 september 2020 om 18:50:35 UTC+2 schreef :
These are tubeless compatible do they have traditional spoke access holes?
Deacon Mark

yes.


Well more questions. I used the DT Swiss spoke calculator and input the hubs dimensions that I measure myself to make certain. It is a basic Novotec f842sb hub. According the the calculations it says 282 for DS and 287 for NON DS. That seems to be more than usual of 2 mm difference. I am sure of my measuring does that seem reasonable to have 5mm difference?

Deacon Mark


Well, never say "never", but a 5mm difference *does* sound quite high to
me. Oh, but wait - did this hub have different-diameter flanges? Then
the two sides' spoke lengths could be quite different indeed.

Mark J.

  #7  
Old September 16th 20, 12:09 AM posted to rec.bicycles.tech
JBeattie
external usenet poster
 
Posts: 5,090
Default DT Swiss 460 rims

On Tuesday, September 15, 2020 at 2:29:01 PM UTC-7, Mark Cleary wrote:
On Tuesday, September 15, 2020 at 12:52:21 PM UTC-5, wrote:
Op dinsdag 15 september 2020 om 18:50:35 UTC+2 schreef :
These are tubeless compatible do they have traditional spoke access holes?
Deacon Mark

yes.


Well more questions. I used the DT Swiss spoke calculator and input the hubs dimensions that I measure myself to make certain. It is a basic Novotec f842sb hub. According the the calculations it says 282 for DS and 287 for NON DS. That seems to be more than usual of 2 mm difference. I am sure of my measuring does that seem reasonable to have 5mm difference?

Deacon Mark


IIRC, its around 281/282 3X NDS on a Shimano Ultegra hub with the DT460s. You're numbers are way off unless that Novatec is a high-low flange hub, and even if it were, it would have to have a really low NDS. Could you send us a link to the hub. Those numbers don't pull anything up.

-- Jay Beattie.
  #8  
Old September 16th 20, 12:22 AM posted to rec.bicycles.tech
Mark Cleary[_3_]
external usenet poster
 
Posts: 48
Default DT Swiss 460 rims

On Tuesday, September 15, 2020 at 6:09:26 PM UTC-5, jbeattie wrote:
On Tuesday, September 15, 2020 at 2:29:01 PM UTC-7, Mark Cleary wrote:
On Tuesday, September 15, 2020 at 12:52:21 PM UTC-5, wrote:
Op dinsdag 15 september 2020 om 18:50:35 UTC+2 schreef :
These are tubeless compatible do they have traditional spoke access holes?
Deacon Mark
yes.


Well more questions. I used the DT Swiss spoke calculator and input the hubs dimensions that I measure myself to make certain. It is a basic Novotec f842sb hub. According the the calculations it says 282 for DS and 287 for NON DS. That seems to be more than usual of 2 mm difference. I am sure of my measuring does that seem reasonable to have 5mm difference?

Deacon Mark

IIRC, its around 281/282 3X NDS on a Shimano Ultegra hub with the DT460s. You're numbers are way off unless that Novatec is a high-low flange hub, and even if it were, it would have to have a really low NDS. Could you send us a link to the hub. Those numbers don't pull anything up.

-- Jay Beattie.

2 cross my rim my bad

Deacon mark
  #9  
Old September 16th 20, 06:23 PM posted to rec.bicycles.tech
JBeattie
external usenet poster
 
Posts: 5,090
Default DT Swiss 460 rims

On Tuesday, September 15, 2020 at 4:22:33 PM UTC-7, Mark Cleary wrote:
On Tuesday, September 15, 2020 at 6:09:26 PM UTC-5, jbeattie wrote:
On Tuesday, September 15, 2020 at 2:29:01 PM UTC-7, Mark Cleary wrote:
On Tuesday, September 15, 2020 at 12:52:21 PM UTC-5, wrote:
Op dinsdag 15 september 2020 om 18:50:35 UTC+2 schreef :
These are tubeless compatible do they have traditional spoke access holes?
Deacon Mark
yes.

Well more questions. I used the DT Swiss spoke calculator and input the hubs dimensions that I measure myself to make certain. It is a basic Novotec f842sb hub. According the the calculations it says 282 for DS and 287 for NON DS. That seems to be more than usual of 2 mm difference. I am sure of my measuring does that seem reasonable to have 5mm difference?

Deacon Mark

IIRC, its around 281/282 3X NDS on a Shimano Ultegra hub with the DT460s. You're numbers are way off unless that Novatec is a high-low flange hub, and even if it were, it would have to have a really low NDS. Could you send us a link to the hub. Those numbers don't pull anything up.

-- Jay Beattie.

2 cross my rim my bad

Deacon mark


I don't know the hub but suspect the spoke calc is wrong because of some input error. I could see getting that kind of length disparity on a high-low hub or a hub with different cross-patterns side to side like 3X DS and 2X NDS.

-- Jay Beattie.
 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
dt swiss rims mark cleary Techniques 2 May 22nd 12 05:00 AM
Why wooden rims are superior to carbon fibre reinforced plastic rims Andre Jute[_2_] Techniques 12 September 17th 10 04:42 PM
DT Swiss RR 1.1 Rims CG Techniques 0 June 21st 06 08:00 PM
DT Swiss RR 1.1 rims? [email protected] Techniques 52 January 4th 06 08:43 PM
FA:Mavic CXP 33 Rims, Hugi 240 Hubs, Dt Swiss spokes dobr24 Marketplace 0 November 1st 04 02:21 AM


All times are GMT +1. The time now is 10:17 AM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright 2004-2020 CycleBanter.com.
The comments are property of their posters.