|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Pedal size of Sakae Ringyo MTP-126.
I have a ten-speed Azuki road bike c.1975. I replaced the pedals once about
20 years ago. It's time to replace them again. The current pedals are Sakae Ringyo MTP-126. I did some searching but could not find the specifications for this pedal. I measured the diameter of the threaded end with a caliper and it's between 1/2" and 9/16" (17/32"). I also saw that it was accepted knowledge that a bike with a three piece crank always has a pedal size of 9/16." So I'm wondering should I just go with conventional wisdom and assume that this pedal is a 9/16" pedal? Thanks for your reply. -- David Farber Los Osos, CA |
Ads |
#2
|
|||
|
|||
Pedal size of Sakae Ringyo MTP-126.
On 2011-08-22, David Farber wrote:
I have a ten-speed Azuki road bike c.1975. I replaced the pedals once about 20 years ago. It's time to replace them again. The current pedals are Sakae Ringyo MTP-126. I did some searching but could not find the specifications for this pedal. I measured the diameter of the threaded end with a caliper and it's between 1/2" and 9/16" (17/32"). I also saw that it was accepted knowledge that a bike with a three piece crank always has a pedal size of 9/16." So I'm wondering should I just go with conventional wisdom and assume that this pedal is a 9/16" pedal? Your pedal is almost certainly 9/16" x 20tpi. -- -John ) |
#3
|
|||
|
|||
Pedal size of Sakae Ringyo MTP-126.
John wrote:
On 2011-08-22, David Farber wrote: I have a ten-speed Azuki road bike c.1975. I replaced the pedals once about 20 years ago. It's time to replace them again. The current pedals are Sakae Ringyo MTP-126. I did some searching but could not find the specifications for this pedal. I measured the diameter of the threaded end with a caliper and it's between 1/2" and 9/16" (17/32"). I also saw that it was accepted knowledge that a bike with a three piece crank always has a pedal size of 9/16." So I'm wondering should I just go with conventional wisdom and assume that this pedal is a 9/16" pedal? Your pedal is almost certainly 9/16" x 20tpi. Thanks John. -- David Farber Los Osos, CA |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
how to check pedal size | hungry4uni | Unicycling | 14 | August 13th 08 01:55 PM |
What size is a pedal nut? | domesticated ape | Unicycling | 7 | May 15th 07 10:50 PM |
What size is a pedal nut? | john_childs | Unicycling | 0 | August 25th 06 11:25 PM |
Torker DX pedal size? | manon1wheel | Unicycling | 9 | July 3rd 06 04:15 AM |
SPD pedal fitting size(s) | RNK | Techniques | 3 | July 13th 05 12:00 AM |