|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Hub Bearing greese recommendations
I am in the process of repacking the bearings in both hubs. The hubs
are using loose bearings, and have not been looked at in a few years. What type of bearing grease should be used for this? I was going to use a standard bearing and chassis grease, but I believe this is a fair bit heavier then what was in the hubs originally. Mike mlawrenc(at)gmail.com |
Ads |
#2
|
|||
|
|||
Hub Bearing greese recommendations
mike wrote:
I am in the process of repacking the bearings in both hubs. The hubs are using loose bearings, and have not been looked at in a few years. What type of bearing grease should be used for this? I was going to use a standard bearing and chassis grease, but I believe this is a fair bit heavier then what was in the hubs originally. I've been using this stuff with good result: http://www.motorex.com/index.cfm/fus...18-444-855-867 and it comes in Re-Animator green :-) "Phil" works fine too. See you LBS. Shawn |
#3
|
|||
|
|||
Hub Bearing greese recommendations
On Apr 23, 8:11 am, mike wrote:
I am in the process of repacking the bearings in both hubs. The hubs are using loose bearings, and have not been looked at in a few years. What type of bearing grease should be used for this? I was going to use a standard bearing and chassis grease, but I believe this is a fair bit heavier then what was in the hubs originally. Mike mlawrenc(at)gmail.com Phil Wood or Bull Snot. JD |
#4
|
|||
|
|||
Hub Bearing greese recommendations
On Apr 23, 11:11 am, mike wrote:
I am in the process of repacking the bearings in both hubs. The hubs are using loose bearings, and have not been looked at in a few years. What type of bearing grease should be used for this? I was going to use a standard bearing and chassis grease, but I believe this is a fair bit heavier then what was in the hubs originally. Mike mlawrenc(at)gmail.com Standard works but try Kandall Blue Lithium or Super Tech Red your fall in love. |
#5
|
|||
|
|||
Hub Bearing greese recommendations
On 23 Apr 2007 08:11:22 -0700, mike wrote:
I am in the process of repacking the bearings in both hubs. The hubs are using loose bearings, and have not been looked at in a few years. What type of bearing grease should be used for this? Real men use nothing but grizzly fat. I was going to use a standard bearing and chassis grease, but I believe this is a fair bit heavier then what was in the hubs originally. Thanks for bringing the newsgroup back to (nitty gritty) reality. Mike mlawrenc(at)gmail.com === I am working on creating wildlife habitat that is off-limits to humans ("pure habitat"). Want to help? (I spent the previous 8 years fighting auto dependence and road construction.) Please don't put a cell phone next to any part of your body that you are fond of! http://home.pacbell.net/mjvande |
#6
|
|||
|
|||
Mike Vandeman supports killing of grizzly bears.
On Apr 24, 1:44 am, Mike Vandeman wrote:
On 23 Apr 2007 08:11:22 -0700, mike wrote: I am in the process of repacking the bearings in both hubs. The hubs are using loose bearings, and have not been looked at in a few years. What type of bearing grease should be used for this? Real men use nothing but grizzly fat. Bears shouldn't have to be killed for your selfishness. I am working on creating wildlife habitat that is off-limits to humans ("pure habitat"). Want to help? (I spent the previous 8 years fighting auto dependence and road construction.) Please don't put a cell phone next to any part of your body that you are fond of! http://home.pacbell.net/mjvande |
#7
|
|||
|
|||
Mike Vandeman supports killing of grizzly bears.
On Apr 24, 5:45 am, The real Duty-Honor-Country
wrote: On Apr 24, 1:44 am, Mike Vandeman wrote: On 23 Apr 2007 08:11:22 -0700, mike wrote: I am in the process of repacking the bearings in both hubs. The hubs are using loose bearings, and have not been looked at in a few years. What type of bearing grease should be used for this? Real men use nothing but grizzly fat. Bears shouldn't have to be killed for your selfishness. Then why'd they take 'em off the endangered species list? Tom |
#8
|
|||
|
|||
Mike Vandeman supports killing of grizzly bears.
tom wrote:
On Apr 24, 5:45 am, The real Duty-Honor-Country wrote: On Apr 24, 1:44 am, Mike Vandeman wrote: On 23 Apr 2007 08:11:22 -0700, mike wrote: I am in the process of repacking the bearings in both hubs. The hubs are using loose bearings, and have not been looked at in a few years. What type of bearing grease should be used for this? Real men use nothing but grizzly fat. Bears shouldn't have to be killed for your selfishness. Then why'd they take 'em off the endangered species list? Tom Nice non-sequitur. Greg -- The ticket******* Tax Tracker: http://www.ticketmastersucks.org/tracker.html Dethink to survive - Mclusky |
#9
|
|||
|
|||
Mike Vandeman supports killing of grizzly bears.
On 24 Apr 2007 05:45:20 -0700, The real Duty-Honor-Country
wrote: On Apr 24, 1:44 am, Mike Vandeman wrote: On 23 Apr 2007 08:11:22 -0700, mike wrote: I am in the process of repacking the bearings in both hubs. The hubs are using loose bearings, and have not been looked at in a few years. What type of bearing grease should be used for this? Real men use nothing but grizzly fat. Bears shouldn't have to be killed for your selfishness. Who said anything about killing? I was referring to liposuction. === I am working on creating wildlife habitat that is off-limits to humans ("pure habitat"). Want to help? (I spent the previous 8 years fighting auto dependence and road construction.) Please don't put a cell phone next to any part of your body that you are fond of! http://home.pacbell.net/mjvande |
#10
|
|||
|
|||
Mike Vandeman supports killing of grizzly bears.
"Mike Vandeman" wrote in message ... On 24 Apr 2007 05:45:20 -0700, The real Duty-Honor-Country wrote: On Apr 24, 1:44 am, Mike Vandeman wrote: On 23 Apr 2007 08:11:22 -0700, mike wrote: I am in the process of repacking the bearings in both hubs. The hubs are using loose bearings, and have not been looked at in a few years. What type of bearing grease should be used for this? Real men use nothing but grizzly fat. Bears shouldn't have to be killed for your selfishness. Who said anything about killing? I was referring to liposuction. Wow, Mikey made a funny. Greg -- Ticket******* tax tracker: http://ticketmastersucks.org/tracker.html Dethink to survive - Mclusky |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FTS-L Bearing | MarcinK | UK | 0 | June 4th 06 09:19 PM |
Bearing Help | TheoELind | Unicycling | 10 | January 31st 06 05:15 PM |
hub bearing pre-load? | [email protected] | Techniques | 26 | May 14th 05 09:01 PM |
bearing cones | Gregory McGuire | Techniques | 4 | August 13th 04 02:19 AM |
Bearing holders | mgrant | Unicycling | 13 | February 11th 04 03:53 AM |