|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Ergo brake lever/shifters or bar ends?
I'm building up a commuter bike with Campy Record Triple components on a
Cannondale T1000 touring frame. While most use will be for commuting, I may do some light touring on this bike. My other (race and cyclocross) bikes all have the Campy Ergo brake/shifter setups. What are the pros/cons of the Ergo setup versus barcons on a commuter/touring bike? BTW, I'm familiar with barcons...I built up my first race bike with barcons in 1972 and used them until I upgraded to the Ergos in '99. Thanks! Lee |
Ads |
#2
|
|||
|
|||
Lee wrote:
I'm building up a commuter bike with Campy Record Triple components on a Cannondale T1000 touring frame. While most use will be for commuting, I may do some light touring on this bike. My other (race and cyclocross) bikes all have the Campy Ergo brake/shifter setups. What are the pros/cons of the Ergo setup versus barcons on a commuter/touring bike? In rollercoaster hills you have to ratchet like mad to drop the chain from the big ring on the granny. With barcons you can do it while holding a sandwich -- --- Marten Gerritsen INFOapestaartjeM-GINEERINGpuntNL www.m-gineering.nl |
#3
|
|||
|
|||
On Wed, 2 Mar 2005 13:57:01 -0500, "Lee"
lee_AT_SHOES_wheelman_DOT_com wrote: What are the pros/cons of the Ergo setup versus barcons on a commuter/touring bike? Althought I'm a great Ergo fan, there is not great advantage on most bicycles for most riders. That said, I haven't ridden barcons in years. I know I made a mistake in '99 when I changed my tandem shifting to Ergo from Shimano barends for my tandem. The barends were far less fussy about which chainring and cogset combinations I chose. A set of decent brake levers and barcons plus cables will cost as much as Veloce or Centaur Ergo. The Ergo brifters will hold much more of their value should you decide to sell. |
#4
|
|||
|
|||
Lee wrote:
I'm building up a commuter bike with Campy Record Triple components on a Cannondale T1000 touring frame. While most use will be for commuting, I may do some light touring on this bike. My other (race and cyclocross) bikes all have the Campy Ergo brake/shifter setups. What are the pros/cons of the Ergo setup versus barcons on a commuter/touring bike? m-gineering wrote: In rollercoaster hills you have to ratchet like mad to drop the chain from the big ring on the granny. With barcons you can do it while holding a sandwich Yes, bar end controls do have a simple elegance and I like them too, but Ergos aren't as bad as all that. Press firmly twice on the return and they'll drop right into low unless something's awry. -- Andrew Muzi www.yellowjersey.org Open every day since 1 April, 1971 |
#5
|
|||
|
|||
Eeek...
When I first read the subject line quickly, I "saw"... Ergo brake lever/shifters ON bar ends? I didn't even want to open it up and read the verbal carnage! Mark Hickey Habanero Cycles http://www.habcycles.com Home of the $695 ti frame |
#6
|
|||
|
|||
Hi Lee, There is also one other option too, that no one has mentioned
here, and that's Campy Record 10-SP Indexed Downtube Shifters also. (Yes, these can be gotten, and are basically the same as the Campy Bar-Cons) Naturally, the right lever, that controls the Rear Derailleur is Indexed, the left Lever is Friction, and will work equally well with either Double, or Triple Chainring Cranks. This version enables the vintage look, utilizing the modern 10-SP systems, and no monkeying with cabling running around the Bars like with Bar-Cons. The downside is reaching down to actuate, but I understand that some prefer this method over Bar-Cons, and Ergos. I guess it's what you like, and what you're used to. All personal preference I guess. I have a brand new set of these Campy Record 10-SP DT Shifters in the box, never used if interested. Mark |
#7
|
|||
|
|||
"Mark D" wrote in message ... Hi Lee, There is also one other option too, that no one has mentioned here, and that's Campy Record 10-SP Indexed Downtube Shifters also. (Yes, these can be gotten, and are basically the same as the Campy Bar-Cons) Naturally, the right lever, that controls the Rear Derailleur is Indexed, the left Lever is Friction, and will work equally well with either Double, or Triple Chainring Cranks. This version enables the vintage look, utilizing the modern 10-SP systems, and no monkeying with cabling running around the Bars like with Bar-Cons. The downside is reaching down to actuate, but I understand that some prefer this method over Bar-Cons, and Ergos. I guess it's what you like, and what you're used to. All personal preference I guess. I have a brand new set of these Campy Record 10-SP DT Shifters in the box, never used if interested. Mark I have a set of 9 speed DT shifters kicking around somewhere, not sure why One of my older bikes has friction shifters, and I don't think I want the DT shifters on this bike... I own both the Ergos and the barcons so cost isn't an issue. I *think* I'm going to go with the Ergos...I tend to find myself on the hoods a lot more than on the drops, so the Ergos will be more convenient... Lee |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rear brake lever, right or left | [email protected] | Techniques | 0 | January 27th 05 07:32 PM |
WTB: Campy carbon brake levers (non Ergo) | Kent | Marketplace | 1 | October 13th 04 10:44 AM |
Giraffe unicycle free mounting (no steps, steps and brake steps) | Ken Fuchs | Unicycling | 2 | November 10th 03 10:05 PM |
ICYCLES Inventory List | ICYCLES | Marketplace | 0 | July 26th 03 08:25 PM |
*Edit Me* - New FAQ addition on brake squeal. | ant | Techniques | 1 | July 23rd 03 06:52 AM |