The Thief Peter Howard = News2021 = Flunkmeister

On Tuesday, February 9, 2021 at 5:46:32 p.m. UTC-5, John B. wrote:
On Tue, 9 Feb 2021 11:16:01 -0500, Frank Krygowski
wrote:

On 2/9/2021 7:15 AM, wrote:
I guess this proves it - Andre has been reduced to a pathetic attention whore.

I disagree with "has been reduced". That implies a time when the
condition did not exist.
I'm not sure whether "reduced" is the correct term. I had a look at
his site once and there was a picture of one of his bikes. It had a
seat on it that looked like a church pew. As the old fellows used to
say, "that old boy must be two axe handles across the arse".

(note: a felling axe would have a haft about 30 inches long)
--
Cheers,

John B.

Some have found this FAQ interesting and relevant to Jute.

Cheers

On Tuesday, February 9, 2021 at 6:04:34 p.m. UTC-5, Sir Ridesalot wrote:
On Tuesday, February 9, 2021 at 5:46:32 p.m. UTC-5, John B. wrote:
On Tue, 9 Feb 2021 11:16:01 -0500, Frank Krygowski
wrote:

On 2/9/2021 7:15 AM, wrote:
I guess this proves it - Andre has been reduced to a pathetic attention whore.

I disagree with "has been reduced". That implies a time when the
condition did not exist.
I'm not sure whether "reduced" is the correct term. I had a look at
his site once and there was a picture of one of his bikes. It had a
seat on it that looked like a church pew. As the old fellows used to
say, "that old boy must be two axe handles across the arse".

(note: a felling axe would have a haft about 30 inches long)
--
Cheers,

John B.
Some have found this FAQ interesting and relevant to Jute.
https://groups.google.com/g/rec.bicy.../c/ZrHjeXZ53b8
Cheers

On Tuesday, February 9, 2021 at 2:46:32 PM UTC-8, John B. wrote:
On Tue, 9 Feb 2021 11:16:01 -0500, Frank Krygowski
wrote:

On 2/9/2021 7:15 AM, wrote:
I guess this proves it - Andre has been reduced to a pathetic attention whore.

I disagree with "has been reduced". That implies a time when the
condition did not exist.
I'm not sure whether "reduced" is the correct term. I had a look at
his site once and there was a picture of one of his bikes. It had a
seat on it that looked like a church pew. As the old fellows used to
say, "that old boy must be two axe handles across the arse".

(note: a felling axe would have a haft about 30 inches long)
--
Cheers,

John B.
More attempts to make himself seem knowledgeable about things he doesn't know. A felling axe cuts cross grain and has a double bitted head. That haft of a felling axe depends entirely on the type of wood that it is used on with softer woods having shorter hafts and harder wood larger heavier bits and softer, shorter.

No, I never was a lumberjack but my father-in-law was and he had a lot of respect for me since we had both been in the service - he was at Pearl Harbor and I in Vietnam despite John's denial which was followed by his story of being stationed at a South Vietnamese Air Force base that had a SVAF fighter/bomber squadron on it. And his seeing B52 bombing missions from 200 miles away. Now I have no doubt that the sound of a mission could carry all the way from the outskirts of Saigon where the bombing mission actually occurred but there was never a B52 raid in the mountains near that base and there were no USAF planes on that base for more than a month or so before it was turned over to the SVAF. In the B52's we couldn't hear bombs exploding because the engines were shaking the entire aircraft. We could SEE the SAM's exploding around us but they might have well have been on a TV show.

On Tue, 09 Feb 2021 10:41:14 -0800, Tom Kunich scribed:

On Monday, February 8, 2021 at 4:27:36 PM UTC-8, News 2021 wrote:

Neither of them has a clue on that sort of matter.
Actually, the only thing that differentiates the pair is 'effort'.
Little tommy has consistently posted similar crap to RBT from 1997,
where as jutey boy is a copy and paste jobber, so long as it only runs
to one page.Jutey boys internet efforts consist of two web sites that
are identical form work (template from 1000 & 1 web page layouts), of
one page where the links mostly do not work and never go beyond one
page.
The overwhelming courage of distance. I must say that I'm really
impressed with you. It just makes me fear your overwhelming knowledge of
the universe.

So you should.
I notice you've continually avoided my repeated offer to come over and
educate you.

On Tue, 9 Feb 2021 19:59:56 -0500, Frank Krygowski
wrote:

On 2/9/2021 6:21 PM, Tom Kunich wrote:
On Tuesday, February 9, 2021 at 2:46:32 PM UTC-8, John B. wrote:
On Tue, 9 Feb 2021 11:16:01 -0500, Frank Krygowski
wrote:

On 2/9/2021 7:15 AM, wrote:
I guess this proves it - Andre has been reduced to a pathetic attention whore.

I disagree with "has been reduced". That implies a time when the
condition did not exist.
I'm not sure whether "reduced" is the correct term. I had a look at
his site once and there was a picture of one of his bikes. It had a
seat on it that looked like a church pew. As the old fellows used to
say, "that old boy must be two axe handles across the arse".

(note: a felling axe would have a haft about 30 inches long)
--
Cheers,

John B.
More attempts to make himself seem knowledgeable about things he doesn't know. A felling axe cuts cross grain and has a double bitted head. That haft of a felling axe depends entirely on the type of wood that it is used on with softer woods having shorter hafts and harder wood larger heavier bits and softer, shorter.

No, I never was a lumberjack but ...

Tom: "... but I just found this thing called Google. I'm going to
pretend to know stuff." ;-)

Actually I do know what a "felling Axe " is as back in my youth we cut
trees by hand, in fact we heated the first house I lived in with a
"wood stove" and the second house had a fireplace for which I cut and
split wood for an hour a day - after school - to "earn" a Winchester
single shot .22 rifle. I was 12 years old :-)
--
Cheers,

John B.

On Tue, 9 Feb 2021 15:21:38 -0800 (PST), Tom Kunich
wrote:

On Tuesday, February 9, 2021 at 2:46:32 PM UTC-8, John B. wrote:
On Tue, 9 Feb 2021 11:16:01 -0500, Frank Krygowski
wrote:

On 2/9/2021 7:15 AM, wrote:
I guess this proves it - Andre has been reduced to a pathetic attention whore.

I disagree with "has been reduced". That implies a time when the
condition did not exist.
I'm not sure whether "reduced" is the correct term. I had a look at
his site once and there was a picture of one of his bikes. It had a
seat on it that looked like a church pew. As the old fellows used to
say, "that old boy must be two axe handles across the arse".

(note: a felling axe would have a haft about 30 inches long)
--
Cheers,

John B.
More attempts to make himself seem knowledgeable about things he doesn't know. A felling axe cuts cross grain and has a double bitted head. That haft of a felling axe depends entirely on the type of wood that it is used on with softer woods having shorter hafts and harder wood larger heavier bits and softer, shorter.

No, I never was a lumberjack but my father-in-law was and he had a lot of respect for me since we had both been in the service - he was at Pearl Harbor and I in Vietnam despite John's denial which was followed by his story of being stationed at a South Vietnamese Air Force base that had a SVAF fighter/bomber squadron on it. And his seeing B52 bombing missions from 200 miles away. Now I have no doubt that the sound of a mission could carry all the way from the outskirts of Saigon where the bombing mission actually occurred but there was never a B52 raid in the mountains near that base and there were no USAF planes on that base for more than a month or so before it was turned over to the SVAF. In the B52's we couldn't hear bombs exploding because the engines were shaking the entire aircraft. We could SEE the SAM's exploding around us but they might have well have been on a TV show.

Nice story, particularly about being in Vietnam.... Guam, Vietnam?
--
Cheers,

John B.

On Tue, 09 Feb 2021 15:21:38 -0800, Tom Kunich scribed:


More attempts to make himself seem knowledgeable about things he doesn't
know. A felling axe cuts cross grain and has a double bitted head. That
haft of a felling axe depends entirely on the type of wood that it is
used on with softer woods having shorter hafts and harder wood larger
heavier bits and softer, shorter.

Give over little tommy. you're posting bull****.
An AXE is a GP (general purpose) tool that comes in different weights for
different uses, the major one of which is the axe user.

It is saws and their teething that are the most affected by the type of
wood being cut.

That is why I have three different axes, five hand saws and over a dozen
bow saw blades. for my three bow saws. Also have three block splitters,
which can really be considered a specialised axe and the one type with
two faces; One or splitting and the other from driving wedges.

On Tuesday, February 9, 2021 at 11:05:39 PM UTC, Sir Ridesalot wrote:

Some have found this FAQ interesting and relevant to Jute.
https://groups.google.com/g/rec.bicy.../c/ZrHjeXZ53b8
Cheers

Rideablot is so dim, he hasn't even noticed that he's promoting another sock puppet of
The Thief Peter Howard = News2021 = Flunkmeister = Sock Puppets Galore = Antiroll

And, even dimmer, Rideablot hasn't noticed that the creepy netstalker
The Thief Peter Howard = News2021 = Flunkmeister = Sock Puppets Galore = Antiroll
is also failed wannabe writer treating us to his worthless opinions on the books of a successful writer he hasn't read.

Meanwhile Rideablot, a blot on all cyclist, is immorally hiding behind a pretense that he doesn't read me, from behind which he feels free to attack me without giving me the slightest opportunity to defend myself, just like Krygowski and several other scumbags do.

You're slime, Rideablot.

Andre Jute
Andre is never more brutal than he has to be -- Nelson Mandela

On Tuesday, February 9, 2021 at 7:57:01 PM UTC-5, Frank Krygowski wrote:
On 2/9/2021 6:01 PM, Tom Kunich wrote:

I am wondering why there are people on .tech that not only don't know anything about repairing bicycles beyond fixing a flat, when they don't have a bicycle shop close enough to have them do it, but have no interest in it either. I can disagree with Andrew or Beattie and still respect them. I have a harder time with Frank though I believe that he once did all of his work himself. But most of the people here not only don't know anything about bicycle tech but don't want to know.
... says the guy who has been endlessly confused by endless mechanical
problems! As usual, Tom, you are greatly overestimating your own - um -
brilliance.

It's fine to not know things and post questions. But Tom, your extended
tales of confusion and woe regarding electronic shifting, bottom
brackets, wheelsets, hubs and more indicate you're way over your head.
You should just get one decent bike working right and ride it.

--
- Frank Krygowski

I do remember two very telling incidents about tommy: 1) he couldn't figure out why his chain was skipping, until Andrew suggested it sounded like a sticky link that some lube should fix - which worked, and 2) how tommy the computer science genius couldn't understand how his computer was showing the current speed going down, but the average speed going up (data sampling 101).

On Tuesday, February 9, 2021 at 11:05:39 PM UTC, Sir Ridesalot wrote:
Some have found this FAQ interesting and relevant to Jute.
https://groups.google.com/g/rec.bicy.../c/ZrHjeXZ53b8

Poor dim Ridealot hasn't noticed that the reference he posted gives us another of the sock puppets of the thief and wannabe writer,
The Thief Peter Howard = News2021 = Flunkmeister = Antiroll = Sockpuppets Galore

Rideablot, whose immorality shames the entire cycling community, further hasn't noticed that "Antiroll" is actually trolling me, rather than the other way round.

Andre Jute
PS Since you're too insensitive to notice, Rideablot, you're slime.