Does a rear disc hub w camp body exist

Hi

Does a rear disc-hub with campy body exits ?

Mavic has a wheelset with that, little to expensive.

/Tony

--
// Tony
// th(at)myob.se

Tony wrote:
Hi

Does a rear disc-hub with campy body exits ?

Mavic has a wheelset with that, little to expensive.

/Tony

Look into a Hugi 240s Shimano disc hub, and you may be able to interchange
their Campy freehub body with the Shimano freehub body on that. I'm not
sure if that involves an axle switch though.
--
Phil, Squid-in-Training

On Tue, 22 Nov 2005 22:06:56 +0100, (Tony) wrote:

Does a rear disc-hub with campy body exits ?

Mavic has a wheelset with that, little to expensive.

You might do better to use a Shimano 9/10 cassette on a Shimano hub with
an otherwise Campy system. Allegedly, that is a good combination.

Jasper

Thanx

Will probably work, but it's a little to expensive for an experiment :-)


In article 0lMgf.10213$mm5.4036@dukeread03, "Phil, Squid-in-Training"
wrote:

Tony wrote:
Hi

Does a rear disc-hub with campy body exits ?

Mavic has a wheelset with that, little to expensive.

/Tony

Look into a Hugi 240s Shimano disc hub, and you may be able to interchange
their Campy freehub body with the Shimano freehub body on that. I'm not
sure if that involves an axle switch though.

--
// Tony
// th(at)myob.se

Yep ... but I can't find some travel-agent that converts camp - shim cog
spacing

Any one know if there exit's camp - shimano travel converter ?

T


In article , Jasper Janssen
wrote:

On Tue, 22 Nov 2005 22:06:56 +0100, (Tony) wrote:

Does a rear disc-hub with campy body exits ?

Mavic has a wheelset with that, little to expensive.

You might do better to use a Shimano 9/10 cassette on a Shimano hub with
an otherwise Campy system. Allegedly, that is a good combination.

Jasper

--
// Tony
// th(at)myob.se

"Tony" == Tony writes:

Tony Yep ... but I can't find some travel-agent that converts camp
Tony - shim cog spacing

Tony Any one know if there exit's camp - shimano travel converter
Tony ?


Jtek ShiftMate.

http://www.jtekengineering.com/shiftmate.htm

It works.

On Tue, 22 Nov 2005 22:06:56 +0100, (Tony) wrote:
Does a rear disc-hub with campy body exits ?
Mavic has a wheelset with that, little to expensive.

Jasper Janssen wrote:
You might do better to use a Shimano 9/10 cassette on a Shimano hub with
an otherwise Campy system. Allegedly, that is a good combination.

Yes, or a Shimano/Phil/Whatever disc hub with an American
Classic Campagnolo-spaced cassette.

--
Andrew Muzi
www.yellowjersey.org
Open every day since 1 April, 1971

On Sun, 27 Nov 2005 00:33:20 -0600, A Muzi wrote:
On Tue, 22 Nov 2005 22:06:56 +0100, (Tony) wrote:
Does a rear disc-hub with campy body exits ?
Mavic has a wheelset with that, little to expensive.

Jasper Janssen wrote:
You might do better to use a Shimano 9/10 cassette on a Shimano hub with
an otherwise Campy system. Allegedly, that is a good combination.

Yes, or a Shimano/Phil/Whatever disc hub with an American
Classic Campagnolo-spaced cassette.

Better yet would be a set of spacers that converts a loose-cog Shimano
cassette to Campy spacing -- only once a special purchase.

But actually, there are reports that a Shimano cassette with a Campy
system shifts acceptably to good without any tricks whatsoever.

Jasper

In article ,
Jasper Janssen wrote:

On Sun, 27 Nov 2005 00:33:20 -0600, A Muzi wrote:
On Tue, 22 Nov 2005 22:06:56 +0100, (Tony) wrote:
Does a rear disc-hub with campy body exits ?
Mavic has a wheelset with that, little to expensive.

Jasper Janssen wrote:
You might do better to use a Shimano 9/10 cassette on a Shimano hub with
an otherwise Campy system. Allegedly, that is a good combination.

Yes, or a Shimano/Phil/Whatever disc hub with an American
Classic Campagnolo-spaced cassette.

Better yet would be a set of spacers that converts a loose-cog Shimano
cassette to Campy spacing -- only once a special purchase.

But actually, there are reports that a Shimano cassette with a Campy
system shifts acceptably to good without any tricks whatsoever.

Jasper

The hot setup is an old-version Campy 9 rear der combined with a
new-version Campy 9 shifter; this combo is a virtually perfect match
with a Shimano 9 cassette.

A season of racing and training on such a setup has borne this out, in
my experience.

--
Ryan Cousineau http://www.wiredcola.com/
"I don't want kids who are thinking about going into mathematics
to think that they have to take drugs to succeed." -Paul Erdos

On Tue, 29 Nov 2005 03:10:48 GMT, Ryan Cousineau wrote:

The hot setup is an old-version Campy 9 rear der combined with a
new-version Campy 9 shifter; this combo is a virtually perfect match
with a Shimano 9 cassette.

Yup. The theoretical mismatch is something like .1 mm over the whole
cassette. That's way less than the inaccuracies inherent in simply
randomly differently clamped cable.

Jasper