|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Campy pawl spring replacement
Hi - found myself pedaling with chain going but cassette not engaging
at an inauspicious place in final lap of a cross race today (USGP 45+). Wheels are Campy Vento. Took hub apart, and the culprit is a broken spring - the one that holds the pawls in. Replacement is on order. Any tricks to the reassembly process ? - hub has same internals as generic mid-level Campy. Thanks in advance for replies. Lou D'Amelio |
Ads |
#2
|
|||
|
|||
Campy pawl spring replacement
On Nov 16, 3:53*pm, wrote:
Hi - found myself pedaling with chain going but cassette not engaging at an inauspicious place in final lap of a cross race today (USGP 45+). Wheels are Campy Vento. Took hub apart, and the culprit is a broken spring - the one that holds the pawls in. Replacement is on order. Any tricks to the reassembly process ? *- hub has same internals as generic mid-level Campy. Thanks in advance for replies. Lou D'Amelio Spring has a 90 degree bend in it that goes into a hole next to the spring channel..pretty simple. We have the spring as well, BTW |
#3
|
|||
|
|||
Campy pawl spring replacement
Qui si parla Campagnolo schreef:
On Nov 16, 3:53 pm, wrote: Hi - found myself pedaling with chain going but cassette not engaging at an inauspicious place in final lap of a cross race today (USGP 45+). Wheels are Campy Vento. Took hub apart, and the culprit is a broken spring - the one that holds the pawls in. Replacement is on order. Any tricks to the reassembly process ? - hub has same internals as generic mid-level Campy. Thanks in advance for replies. Lou D'Amelio Spring has a 90 degree bend in it that goes into a hole next to the spring channel..pretty simple. We have the spring as well, BTW Yes it pretty simple but watch not to overstretch that tiny spring while installing. I use a sewing needle to guide the spring along the spring channel instead of my clunky finger. Lou |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
mavic pawl availability? | jim beam | Techniques | 5 | October 1st 06 02:41 PM |
Odd Campy Ergo detente spring failure? Or not so odd? | me | Techniques | 1 | August 21st 06 01:16 PM |
Campy Pro-Fit Pedal Spring Replacement | Lou D'Amelio | Techniques | 1 | July 21st 06 01:49 PM |
Campy/Shimano rear derailleur spring differences? | Phil, Squid-in-Training | Techniques | 13 | December 25th 05 11:15 PM |
Manitou EFC Spring replacement kit | db | Techniques | 0 | August 12th 05 09:45 AM |