|
|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Flying Pigeon - which size pedals?
A co-worker just acquired a new Flying Pigeon bike in all it's 50 pounds of glory. Unfortunately, the pedals are horrid, and are threatening to fall apart at any moment. Can anyone verify if these are 9/16th or 1/2 inch? The steel cottered cranks look very thin, but that could be simply because they are steel. |
Ads |
#2
|
|||
|
|||
Flying Pigeon - which size pedals?
On Jun 3, 9:33*am, Brian Huntley wrote:
A co-worker just acquired a new Flying Pigeon bike in all it's 50 pounds of glory. Unfortunately, the pedals are horrid, and are threatening to fall apart at any moment. Can anyone verify if these are 9/16th or 1/2 inch? The steel cottered cranks look very thin, but that could be simply because they are steel. I believe they're 9/16" cottered if I remember right. Easy enough to pull a pedal and check. |
#3
|
|||
|
|||
Flying Pigeon - which size pedals?
On Jun 3, 10:08*am, landotter wrote:
On Jun 3, 9:33*am, Brian Huntley wrote: A co-worker just acquired a new Flying Pigeon bike in all it's 50 pounds of glory. Unfortunately, the pedals are horrid, and are threatening to fall apart at any moment. Can anyone verify if these are 9/16th or 1/2 inch? The steel cottered cranks look very thin, but that could be simply because they are steel. I believe they're 9/16" cottered if I remember right. Easy enough to pull a pedal and check. Thanks. These particular pedals have about 25 km on them and don't look like they'd survive being take off. It's as if they have no bearing ball in them at all, and are flopping on their spindles. |
#4
|
|||
|
|||
Flying Pigeon - which size pedals?
On Jun 3, 10:17*am, Brian Huntley wrote:
On Jun 3, 10:08*am, landotter wrote: On Jun 3, 9:33*am, Brian Huntley wrote: A co-worker just acquired a new Flying Pigeon bike in all it's 50 pounds of glory. Unfortunately, the pedals are horrid, and are threatening to fall apart at any moment. Can anyone verify if these are 9/16th or 1/2 inch? The steel cottered cranks look very thin, but that could be simply because they are steel. I believe they're 9/16" cottered if I remember right. Easy enough to pull a pedal and check. Thanks. These particular pedals have about 25 km on them and don't look like they'd survive being take off. It's as if they have no bearing ball in them at all, and are flopping on their spindles. A set of Union rubber pedals is a cheap and appropriate fix. MKS are also good, rebuildable, but 3X the price. |
#5
|
|||
|
|||
Flying Pigeon - which size pedals?
On Jun 3, 9:17*am, Brian Huntley wrote:
Thanks. These particular pedals have about 25 km on them and don't look like they'd survive being take off. It's as if they have no bearing ball in them at all, and are flopping on their spindles. Flying pigeons are frequently seen with a pedal axle without platforms. |
#6
|
|||
|
|||
Flying Pigeon - which size pedals?
On Jun 3, 1:07*pm, wrote:
On Jun 3, 9:17*am, Brian Huntley wrote: Thanks. These particular pedals have about 25 km on them and don't look like they'd survive being take off. It's as if they have no bearing ball in them at all, and are flopping on their spindles. Flying pigeons are frequently seen with a pedal axle without platforms. That's Grant Peterson's next sell. With Mao slippers--the *feel* is fungible. |
#7
|
|||
|
|||
Flying Pigeon - which size pedals?
On Wed, 3 Jun 2009 11:16:26 -0700 (PDT), landotter
wrote: On Jun 3, 1:07*pm, wrote: On Jun 3, 9:17*am, Brian Huntley wrote: Thanks. These particular pedals have about 25 km on them and don't look like they'd survive being take off. It's as if they have no bearing ball in them at all, and are flopping on their spindles. Flying pigeons are frequently seen with a pedal axle without platforms. That's Grant Peterson's next sell. With Mao slippers--the *feel* is fungible. LOL |
#8
|
|||
|
|||
Flying Pigeon - which size pedals?
Brian Huntley wrote:
A co-worker just acquired a new Flying Pigeon bike in all it's 50 pounds of glory. Unfortunately, the pedals are horrid, and are threatening to fall apart at any moment. Can anyone verify if these are 9/16th or 1/2 inch? The steel cottered cranks look very thin, but that could be simply because they are steel. 9/16" -- Andrew Muzi www.yellowjersey.org/ Open every day since 1 April, 1971 |
#9
|
|||
|
|||
Flying Pigeon - which size pedals?
On Jun 3, 1:07*pm, wrote:
On Jun 3, 9:17*am, Brian Huntley wrote: Thanks. These particular pedals have about 25 km on them and don't look like they'd survive being take off. It's as if they have no bearing ball in them at all, and are flopping on their spindles. Flying pigeons are frequently seen with a pedal axle without platforms. Yes, I've seen that in photos on CrazyGuyonaBike.com, but though it was a maintenance issue. Now I know - they come with factory installed crap pedals. |
#10
|
|||
|
|||
Flying Pigeon - which size pedals?
On Jun 4, 12:11*pm, Brian Huntley wrote:
On Jun 3, 1:07*pm, wrote: On Jun 3, 9:17*am, Brian Huntley wrote: Thanks. These particular pedals have about 25 km on them and don't look like they'd survive being take off. It's as if they have no bearing ball in them at all, and are flopping on their spindles. Flying pigeons are frequently seen with a pedal axle without platforms. Yes, I've seen that in photos on CrazyGuyonaBike.com, but though it was a maintenance issue. Now I know - they come with factory installed crap pedals. Sadly the majority of Flying Pigeons and their Shanghai cousins Yongjiu (Forever) bikes use a different standard for their pedals. A mate, my wife and I bought two Yongjius and a Flying Pigeon in Beijing in 2007. They all came with the requisite crappy pedals which I had hoped to swap with something better but discovered that they are smaller than 9/16th" and bigger than 1/2". Jase had already gone through 3 sets by the time he left. I brought my bikes with me when I came back and now I am faced with either trying to find some sort of helicoil to bring them back to 1/2" to fit some BMX pedals, drilling the cranks out and re-tapping them for 9/16th", or replacing the cranks. At this stage I am likely to go for the drilling and re- tapping. But first I'll pull the pedals off my wife's bike which she never rides... If you want to persist with the standard pedals you can get a pair for about $2 pretty much anywhere in Beijing, you just need to know someone who is prepared to buy them and send them back to you. At least it is easier than the 28 1/2" tyres with built in 'rim tape'. Others with more historical knowledge might be able to identify the actual size for the pedals. I suspect that these bikes are simply copies of what the Europeans brought to China in the late 19th and early 20th centuries. Cheers, Cameron |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Missing brake bits from Flying Pigeon bicycle | Rocket J Squirrel | Techniques | 29 | October 20th 08 05:29 AM |
FA: Jackets size 5,6 & SPD pedals | Cat Dailey | Marketplace | 0 | October 15th 06 11:10 AM |
What size of pedals are in the torker dx? | bcwheelriderguyhehehehehe | Unicycling | 2 | October 3rd 06 04:33 AM |
The end of the flying pigeon... | eddiec | Australia | 4 | May 23rd 06 01:02 PM |
Goodbye, Flying Pigeon | Luigi de Guzman | General | 2 | March 8th 04 11:30 PM |