??? about incredibly loud breaks

wrote in message
...
I bought a cheap bike at WalMart today. It was about $60.
Not being much of an enthusiast, I don't intend to spend
much (if any) more for one, but figured a cheap bike would
get me some excercise and provide the basics that a person
would want from a bicycle. In most respects is seems to do
well enough, but the breaks are ***loud!!!!!!!!!!!!!!***!!!!!!. Not
only are they the loudest breaks I've ever heard on a bike,
but they are the loudest breaks I've ever heard on anything!
They are so loud that I won't keep the thing unless they can
be made to shut up. They don't just squeal, they scream with
a whole bunch of different tones going on...to me they sound
like a flock of geese, only a whole lot louder than any geese
could be. If I stopped the bike while going past a house, I feel
sure the people inside would be able to hear it very easily
even if all the doors and windows were closed. Is there a way
to make them shut up?

If you are new to bicycle maintenance, one web site you definitely should
check out is Sheldon Brown's.

You probably need to "toe in" the brakes, and this is covered on this page:
http://www.sheldonbrown.com/gloss_ta-o.html
Part of this entry is below:

"Good practice in installing brake shoes is to "toe them in", so that the
front part of the shoe hits the rim first. As the brake arm flexes under
real braking, it will permit the whole surface of the brake shoe to engage
the rim.

"Toeing in of brake shoes can also reduce the annoying squeal some brakes
make when in use."

wrote in message
...
I bought a cheap bike at WalMart today. It was about $60.
Not being much of an enthusiast, I don't intend to spend
much (if any) more for one, but figured a cheap bike would
get me some excercise and provide the basics that a person
would want from a bicycle. In most respects is seems to do
well enough, but the breaks are ***loud!!!!!!!!!!!!!!***!!!!!!. Not
only are they the loudest breaks I've ever heard on a bike,
but they are the loudest breaks I've ever heard on anything!
They are so loud that I won't keep the thing unless they can
be made to shut up. They don't just squeal, they scream with
a whole bunch of different tones going on...to me they sound
like a flock of geese, only a whole lot louder than any geese
could be. If I stopped the bike while going past a house, I feel
sure the people inside would be able to hear it very easily
even if all the doors and windows were closed. Is there a way
to make them shut up?

If you are new to bicycle maintenance, one web site you definitely should
check out is Sheldon Brown's.

You probably need to "toe in" the brakes, and this is covered on this page:
http://www.sheldonbrown.com/gloss_ta-o.html
Part of this entry is below:

"Good practice in installing brake shoes is to "toe them in", so that the
front part of the shoe hits the rim first. As the brake arm flexes under
real braking, it will permit the whole surface of the brake shoe to engage
the rim.

"Toeing in of brake shoes can also reduce the annoying squeal some brakes
make when in use."

wrote in message
...
I bought a cheap bike at WalMart today. It was about $60.
Not being much of an enthusiast, I don't intend to spend
much (if any) more for one, but figured a cheap bike would
get me some excercise and provide the basics that a person
would want from a bicycle. In most respects is seems to do
well enough, but the breaks are ***loud!!!!!!!!!!!!!!***!!!!!!. Not
only are they the loudest breaks I've ever heard on a bike,
but they are the loudest breaks I've ever heard on anything!
They are so loud that I won't keep the thing unless they can
be made to shut up. They don't just squeal, they scream with
a whole bunch of different tones going on...to me they sound
like a flock of geese, only a whole lot louder than any geese
could be. If I stopped the bike while going past a house, I feel
sure the people inside would be able to hear it very easily
even if all the doors and windows were closed. Is there a way
to make them shut up?

If you are new to bicycle maintenance, one web site you definitely should
check out is Sheldon Brown's.

You probably need to "toe in" the brakes, and this is covered on this page:
http://www.sheldonbrown.com/gloss_ta-o.html
Part of this entry is below:

"Good practice in installing brake shoes is to "toe them in", so that the
front part of the shoe hits the rim first. As the brake arm flexes under
real braking, it will permit the whole surface of the brake shoe to engage
the rim.

"Toeing in of brake shoes can also reduce the annoying squeal some brakes
make when in use."

wrote in message . ..
I bought a cheap bike at WalMart today. It was about $60.
Not being much of an enthusiast, I don't intend to spend
much (if any) more for one, but figured a cheap bike would
get me some excercise and provide the basics that a person
would want from a bicycle. In most respects is seems to do
well enough, but the breaks are ***loud!!!!!!!!!!!!!!***!!!!!!. Not
only are they the loudest breaks I've ever heard on a bike,
but they are the loudest breaks I've ever heard on anything!
They are so loud that I won't keep the thing unless they can
be made to shut up. They don't just squeal, they scream with
a whole bunch of different tones going on...to me they sound
like a flock of geese, only a whole lot louder than any geese
could be. If I stopped the bike while going past a house, I feel
sure the people inside would be able to hear it very easily
even if all the doors and windows were closed. Is there a way
to make them shut up?

Probably not . Some brake blocks just seem to shriek. You might
want to have a bike mechanic see if they are properly toed in but you
may have to spend 5-10 dollars and replace the blocks. I had a much
more expensive bike with the same problem and that was the only
solution.

Happy cycling.

John Kane
Perth ON

wrote in message . ..
I bought a cheap bike at WalMart today. It was about $60.
Not being much of an enthusiast, I don't intend to spend
much (if any) more for one, but figured a cheap bike would
get me some excercise and provide the basics that a person
would want from a bicycle. In most respects is seems to do
well enough, but the breaks are ***loud!!!!!!!!!!!!!!***!!!!!!. Not
only are they the loudest breaks I've ever heard on a bike,
but they are the loudest breaks I've ever heard on anything!
They are so loud that I won't keep the thing unless they can
be made to shut up. They don't just squeal, they scream with
a whole bunch of different tones going on...to me they sound
like a flock of geese, only a whole lot louder than any geese
could be. If I stopped the bike while going past a house, I feel
sure the people inside would be able to hear it very easily
even if all the doors and windows were closed. Is there a way
to make them shut up?

Probably not . Some brake blocks just seem to shriek. You might
want to have a bike mechanic see if they are properly toed in but you
may have to spend 5-10 dollars and replace the blocks. I had a much
more expensive bike with the same problem and that was the only
solution.

Happy cycling.

John Kane
Perth ON

wrote in message . ..
I bought a cheap bike at WalMart today. It was about $60.
Not being much of an enthusiast, I don't intend to spend
much (if any) more for one, but figured a cheap bike would
get me some excercise and provide the basics that a person
would want from a bicycle. In most respects is seems to do
well enough, but the breaks are ***loud!!!!!!!!!!!!!!***!!!!!!. Not
only are they the loudest breaks I've ever heard on a bike,
but they are the loudest breaks I've ever heard on anything!
They are so loud that I won't keep the thing unless they can
be made to shut up. They don't just squeal, they scream with
a whole bunch of different tones going on...to me they sound
like a flock of geese, only a whole lot louder than any geese
could be. If I stopped the bike while going past a house, I feel
sure the people inside would be able to hear it very easily
even if all the doors and windows were closed. Is there a way
to make them shut up?

Probably not . Some brake blocks just seem to shriek. You might
want to have a bike mechanic see if they are properly toed in but you
may have to spend 5-10 dollars and replace the blocks. I had a much
more expensive bike with the same problem and that was the only
solution.

Happy cycling.

John Kane
Perth ON

This is a cross-post reply, so I don't know if anyone has
brought this up in the other replies, but brakes will squeal even on
the best brakes and even when toed-in if they are literally squeaky
clean. As pads break in, they pick up particles of silica from dirt,
and that quiets them down. you can speed up the process by smearing a
little clay-rich (not sandy) mud on their faces. Pottery clay would
probably be ideal, if you can get hold of a little. Some people use
cleanser to get the same effect.


You got to be very careful if you don't know where you're going, because you might not get there.

- Yogi Berra

This is a cross-post reply, so I don't know if anyone has
brought this up in the other replies, but brakes will squeal even on
the best brakes and even when toed-in if they are literally squeaky
clean. As pads break in, they pick up particles of silica from dirt,
and that quiets them down. you can speed up the process by smearing a
little clay-rich (not sandy) mud on their faces. Pottery clay would
probably be ideal, if you can get hold of a little. Some people use
cleanser to get the same effect.


You got to be very careful if you don't know where you're going, because you might not get there.

- Yogi Berra

This is a cross-post reply, so I don't know if anyone has
brought this up in the other replies, but brakes will squeal even on
the best brakes and even when toed-in if they are literally squeaky
clean. As pads break in, they pick up particles of silica from dirt,
and that quiets them down. you can speed up the process by smearing a
little clay-rich (not sandy) mud on their faces. Pottery clay would
probably be ideal, if you can get hold of a little. Some people use
cleanser to get the same effect.


You got to be very careful if you don't know where you're going, because you might not get there.

- Yogi Berra

wrote in message
...

I bought a cheap bike at WalMart today. It was about $60.

I seriously can't imagine how they can produce and sell a bike for $60 and
still make a profit. Granted they make millions of them and they use
Chinese slave labor....but still.

The last time I replaced the tires on my MTB - not expensive tires either -
it cost me $50 for the tires and new tubes.

Just yesterday I went to my LBS to order a replacement casette, chain and
crank set...nearly $150. And these are by no means high end parts.

Cheto