ERD/Spoke Length for Velocity Fusion

I have to order the spokes before I get my mitts on the rim... Spokecalc
warns that the ERD is 596 and not the spec'ed 591--for 700c rims. Any
experience with this?

Building with DA 9sp (130mm hub 28h x2) I am getting 283.5 and 281.9 for
spoke lengths. Should I just round up for DT spokes or add a mil or two.
Plan is 14/15 for comps DS and 14/17 revo for NDS.

Thanks for your help.

Shawn- Spokecalc
warns that the ERD is 596 BRBR
Building with DA 9sp (130mm hub 28h x2) I am getting 283.5 and 281.9 for
spoke lengths. Should I just round up for DT spokes or add a mil or two.
Plan is 14/15 for comps DS and 14/17 revo for NDS. BRBR

Call the shop and ask. We have built many wheels with Fusion, they are 596mm
ERD.

As for the lacing, I would suggest 3 cross lacing and inside pulling. 3 cross
for 28 hole rear and thin spokes on the NDS. Inside pulling to reduce
spoke/flange overlap and bend for 28/3 cross.

Peter Chisholm
Vecchio's Bicicletteria
1833 Pearl St.
Boulder, CO, 80302
(303)440-3535
http://www.vecchios.com
"Ruote convenzionali costruite eccezionalmente bene"