|
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
WTB: 1" Carbon Fork Compression Plug
I have a 1 inch ITM fork with a carbon steerer. These things are a little
thicker walled steerers than others I've used such as the Eastons. The plugs I have will only compress to 0.815" whereas the ID of the ITM fork is 0.778". What has anyone else used that would fit these forks? Will the Reynolds 1" compression plug work? |
Ads |
#2
|
|||
|
|||
WTB: 1" Carbon Fork Compression Plug
On Wed, 14 May 2008 19:38:36 -0700, "Tom Kunich" cyclintom@yahoo.
com wrote: I have a 1 inch ITM fork with a carbon steerer. These things are a little thicker walled steerers than others I've used such as the Eastons. The plugs I have will only compress to 0.815" whereas the ID of the ITM fork is 0.778". What has anyone else used that would fit these forks? Will the Reynolds 1" compression plug work? I recall that problem a couple of years ago. The FSA compressor has 3 wedges with a rubber band that holds them together. I removed one of the wedges and it worked fine. |
#3
|
|||
|
|||
WTB: 1" Carbon Fork Compression Plug
On May 14, 6:38 pm, "Tom Kunich" cyclintom@yahoo. com wrote:
I have a 1 inch ITM fork with a carbon steerer. These things are a little thicker walled steerers than others I've used such as the Eastons. The plugs I have will only compress to 0.815" whereas the ID of the ITM fork is 0.778". What has anyone else used that would fit these forks? Will the Reynolds 1" compression plug work? Check it out http://www.fastenal.com/web/products...ex?sku=0302110 |
#4
|
|||
|
|||
WTB: 1" Carbon Fork Compression Plug
On May 14, 8:38*pm, "Tom Kunich" cyclintom@yahoo. com wrote:
I have a 1 inch ITM fork with a carbon steerer. These things are a little thicker walled steerers than others I've used such as the Eastons. The plugs I have will only compress to 0.815" whereas the ID of the ITM fork is 0.778". What has anyone else used that would fit these forks? Will the Reynolds 1" compression plug work? Try a Ritchey plug. made for 1 and 1 1/8inch steerers. |
#5
|
|||
|
|||
WTB: 1" Carbon Fork Compression Plug
"Tom Kunich" cyclintom@yahoo. com wrote in
m: I have a 1 inch ITM fork with a carbon steerer. These things are a little thicker walled steerers than others I've used such as the Eastons. The plugs I have will only compress to 0.815" whereas the ID of the ITM fork is 0.778". What has anyone else used that would fit these forks? Will the Reynolds 1" compression plug work? I have the Reynolds 2007 1 inch expander. It measures .815 with my calipers. I used the Alpha Q insert and star nut in my Ouzo Pro. I guess the warranty is toast, but my confidence in the carbon steerer is much greater. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
problem solvers compression plug | gillymon | Techniques | 0 | July 18th 07 04:34 PM |
Wanted - Reynolds 1" Fork Expander Plug Part | David White | Marketplace | 2 | November 21st 06 08:16 PM |
Stuck compression plug | Donga | Techniques | 2 | June 24th 06 11:24 PM |
Wound-up carbon/carbon fork, 1" threaded 7 1/4 inch steerer $75 | RobInfo | Marketplace | 0 | September 28th 05 10:41 PM |
WTB 1" expander plug for carbon fiber fork steerer | Joshua Lee | Marketplace | 1 | July 24th 05 02:43 PM |