A Cycling & bikes forum. CycleBanter.com

Go Back   Home » CycleBanter.com forum » rec.bicycles » Techniques
Site Map Home Register Authors List Search Today's Posts Mark Forums Read Web Partners

Dirty word: Lube



 
 
Thread Tools Display Modes
  #1  
Old April 8th 17, 04:42 AM posted to rec.bicycles.tech
James[_8_]
external usenet poster
 
Posts: 6,153
Default Dirty word: Lube

A few weeks ago I applied my wax/oil chain lube, just before starting a
cycling touring holiday that went for 9 days. We encountered 4 days
where it rained for a good part of that days ride. The average day was
near 100km long. I've since added another 200km or so, and my chain
might be ready for another wax/oil application by now. Note that I just
got home from an 80km ride and the chain doesn't squeak or sound dry.

I observed numerous others on the ride spending time applying lube to
their chain, mostly in the form of commercial and relatively expensive
wax in solvent preparations.

There was one other guy who used a wax based solution that he'd mixed
himself from a recipe he found online. It consists of paraffin wax,
paraffin oil and xylene solvent. He didn't need to make any chain
maintenance stops either.

--
JS
Ads
  #2  
Old April 8th 17, 08:51 AM posted to rec.bicycles.tech
John B.[_3_]
external usenet poster
 
Posts: 5,697
Default Dirty word: Lube

On Sat, 8 Apr 2017 13:42:32 +1000, James
wrote:

A few weeks ago I applied my wax/oil chain lube, just before starting a
cycling touring holiday that went for 9 days. We encountered 4 days
where it rained for a good part of that days ride. The average day was
near 100km long. I've since added another 200km or so, and my chain
might be ready for another wax/oil application by now. Note that I just
got home from an 80km ride and the chain doesn't squeak or sound dry.

I observed numerous others on the ride spending time applying lube to
their chain, mostly in the form of commercial and relatively expensive
wax in solvent preparations.

There was one other guy who used a wax based solution that he'd mixed
himself from a recipe he found online. It consists of paraffin wax,
paraffin oil and xylene solvent. He didn't need to make any chain
maintenance stops either.


The other guy's receipe? Was it for a lube that had to be applied hot
or was the xylene enough to allow it to be applied as a liquid and
then dry in place?


--
Cheers,

John B.

  #3  
Old April 8th 17, 10:13 AM posted to rec.bicycles.tech
James[_8_]
external usenet poster
 
Posts: 6,153
Default Dirty word: Lube

On 08/04/17 17:51, John B. wrote:
On Sat, 8 Apr 2017 13:42:32 +1000, James
wrote:

A few weeks ago I applied my wax/oil chain lube, just before starting a
cycling touring holiday that went for 9 days. We encountered 4 days
where it rained for a good part of that days ride. The average day was
near 100km long. I've since added another 200km or so, and my chain
might be ready for another wax/oil application by now. Note that I just
got home from an 80km ride and the chain doesn't squeak or sound dry.

I observed numerous others on the ride spending time applying lube to
their chain, mostly in the form of commercial and relatively expensive
wax in solvent preparations.

There was one other guy who used a wax based solution that he'd mixed
himself from a recipe he found online. It consists of paraffin wax,
paraffin oil and xylene solvent. He didn't need to make any chain
maintenance stops either.


The other guy's receipe? Was it for a lube that had to be applied hot
or was the xylene enough to allow it to be applied as a liquid and
then dry in place?


Apparently it could be liquified by immersing the plastic bottle it was
in, in hot water. I should think mine would do that too, but I also
think the penetration is much better if the chain is heated with the wax.

--
JS

  #4  
Old April 8th 17, 10:46 AM posted to rec.bicycles.tech
somebody[_2_]
external usenet poster
 
Posts: 193
Default Dirty word: Lube

On Sat, 8 Apr 2017 13:42:32 +1000, James
wrote:

A few weeks ago I applied my wax/oil chain lube, just before starting a
cycling touring holiday that went for 9 days. We encountered 4 days
where it rained for a good part of that days ride. The average day was
near 100km long. I've since added another 200km or so, and my chain
might be ready for another wax/oil application by now. Note that I just
got home from an 80km ride and the chain doesn't squeak or sound dry.

I observed numerous others on the ride spending time applying lube to
their chain, mostly in the form of commercial and relatively expensive
wax in solvent preparations.

There was one other guy who used a wax based solution that he'd mixed
himself from a recipe he found online. It consists of paraffin wax,
paraffin oil and xylene solvent. He didn't need to make any chain
maintenance stops either.


Were you riding in dusty/dirty conditions? That's the true test. You
can use anything when it's clean. And anything that leaves oil tends
to be good in the rain.

For commuting in the rain I wipe the chain with a dry rag, put on some
acetone/oil mix and wipe again. The acetone-based stuff seems to mix
well with water and that helps dilute the remaining water.

Last step is setting a small electric fan down, it helps dry things
off faster. The fan staus in the garage and the whold thing takes a
few minutes. It has worked well so far.
  #5  
Old April 8th 17, 12:50 PM posted to rec.bicycles.tech
John B.[_3_]
external usenet poster
 
Posts: 5,697
Default Dirty word: Lube

On Sat, 8 Apr 2017 19:13:04 +1000, James
wrote:

On 08/04/17 17:51, John B. wrote:
On Sat, 8 Apr 2017 13:42:32 +1000, James
wrote:

A few weeks ago I applied my wax/oil chain lube, just before starting a
cycling touring holiday that went for 9 days. We encountered 4 days
where it rained for a good part of that days ride. The average day was
near 100km long. I've since added another 200km or so, and my chain
might be ready for another wax/oil application by now. Note that I just
got home from an 80km ride and the chain doesn't squeak or sound dry.

I observed numerous others on the ride spending time applying lube to
their chain, mostly in the form of commercial and relatively expensive
wax in solvent preparations.

There was one other guy who used a wax based solution that he'd mixed
himself from a recipe he found online. It consists of paraffin wax,
paraffin oil and xylene solvent. He didn't need to make any chain
maintenance stops either.


The other guy's receipe? Was it for a lube that had to be applied hot
or was the xylene enough to allow it to be applied as a liquid and
then dry in place?


Apparently it could be liquified by immersing the plastic bottle it was
in, in hot water. I should think mine would do that too, but I also
think the penetration is much better if the chain is heated with the wax.


Interesting. I use paraffin with about 20% beeswax added and some
molybdenum disulfide. The idea was that the added beeswax would make
the mix more adhesive, although now I'm not sure if it is necessary.
I've got an electric pot and I just chuck the chain in and turn the
pot on and leave it alone until I can be sure that the thermostat has
cycled a time or two so the chain reaches the temperature of the
melted wax mix.

As you say, a waxed chain just lasts and lasts and what I was thinking
about was some sort of liquid wax mix that would dry after application
so one could carry a small bottle in the tool bag. Then if things
started to squeak one could do something about it. Although I'm not
sure that is necessary as my waxed chains have never squeaked :-)

--
Cheers,

John B.

  #6  
Old April 8th 17, 12:55 PM posted to rec.bicycles.tech
John B.[_3_]
external usenet poster
 
Posts: 5,697
Default Dirty word: Lube

On Sat, 08 Apr 2017 05:46:00 -0400, somebody
wrote:

On Sat, 8 Apr 2017 13:42:32 +1000, James
wrote:

A few weeks ago I applied my wax/oil chain lube, just before starting a
cycling touring holiday that went for 9 days. We encountered 4 days
where it rained for a good part of that days ride. The average day was
near 100km long. I've since added another 200km or so, and my chain
might be ready for another wax/oil application by now. Note that I just
got home from an 80km ride and the chain doesn't squeak or sound dry.

I observed numerous others on the ride spending time applying lube to
their chain, mostly in the form of commercial and relatively expensive
wax in solvent preparations.

There was one other guy who used a wax based solution that he'd mixed
himself from a recipe he found online. It consists of paraffin wax,
paraffin oil and xylene solvent. He didn't need to make any chain
maintenance stops either.


Were you riding in dusty/dirty conditions? That's the true test. You
can use anything when it's clean. And anything that leaves oil tends
to be good in the rain.

For commuting in the rain I wipe the chain with a dry rag, put on some
acetone/oil mix and wipe again. The acetone-based stuff seems to mix
well with water and that helps dilute the remaining water.

Actually acetone mixes completely with water and makes a homogeneous
solution.

Last step is setting a small electric fan down, it helps dry things
off faster. The fan staus in the garage and the whold thing takes a
few minutes. It has worked well so far.

--
Cheers,

John B.

  #7  
Old April 8th 17, 06:59 PM posted to rec.bicycles.tech
[email protected]
external usenet poster
 
Posts: 3,345
Default Dirty word: Lube

On Saturday, April 8, 2017 at 12:51:40 AM UTC-7, John B. wrote:
On Sat, 8 Apr 2017 13:42:32 +1000, James
wrote:

A few weeks ago I applied my wax/oil chain lube, just before starting a
cycling touring holiday that went for 9 days. We encountered 4 days
where it rained for a good part of that days ride. The average day was
near 100km long. I've since added another 200km or so, and my chain
might be ready for another wax/oil application by now. Note that I just
got home from an 80km ride and the chain doesn't squeak or sound dry.

I observed numerous others on the ride spending time applying lube to
their chain, mostly in the form of commercial and relatively expensive
wax in solvent preparations.

There was one other guy who used a wax based solution that he'd mixed
himself from a recipe he found online. It consists of paraffin wax,
paraffin oil and xylene solvent. He didn't need to make any chain
maintenance stops either.


The other guy's receipe? Was it for a lube that had to be applied hot
or was the xylene enough to allow it to be applied as a liquid and
then dry in place?


--
Cheers,

John B.


https://www.youtube.com/watch?v=XhM_FaRsw2Y
  #8  
Old April 8th 17, 07:29 PM posted to rec.bicycles.tech
Frank Krygowski[_4_]
external usenet poster
 
Posts: 10,538
Default Dirty word: Lube

On 4/8/2017 7:50 AM, John B. wrote:
On Sat, 8 Apr 2017 19:13:04 +1000, James
wrote:

On 08/04/17 17:51, John B. wrote:
On Sat, 8 Apr 2017 13:42:32 +1000, James
wrote:

A few weeks ago I applied my wax/oil chain lube, just before starting a
cycling touring holiday that went for 9 days. We encountered 4 days
where it rained for a good part of that days ride. The average day was
near 100km long. I've since added another 200km or so, and my chain
might be ready for another wax/oil application by now. Note that I just
got home from an 80km ride and the chain doesn't squeak or sound dry.

I observed numerous others on the ride spending time applying lube to
their chain, mostly in the form of commercial and relatively expensive
wax in solvent preparations.

There was one other guy who used a wax based solution that he'd mixed
himself from a recipe he found online. It consists of paraffin wax,
paraffin oil and xylene solvent. He didn't need to make any chain
maintenance stops either.

The other guy's receipe? Was it for a lube that had to be applied hot
or was the xylene enough to allow it to be applied as a liquid and
then dry in place?


Apparently it could be liquified by immersing the plastic bottle it was
in, in hot water. I should think mine would do that too, but I also
think the penetration is much better if the chain is heated with the wax.


Interesting. I use paraffin with about 20% beeswax added and some
molybdenum disulfide. The idea was that the added beeswax would make
the mix more adhesive, although now I'm not sure if it is necessary.
I've got an electric pot and I just chuck the chain in and turn the
pot on and leave it alone until I can be sure that the thermostat has
cycled a time or two so the chain reaches the temperature of the
melted wax mix.

As you say, a waxed chain just lasts and lasts and what I was thinking
about was some sort of liquid wax mix that would dry after application
so one could carry a small bottle in the tool bag. Then if things
started to squeak one could do something about it. Although I'm not
sure that is necessary as my waxed chains have never squeaked :-)


I've wished for a method of re-waxing on long tours, but I finally
decided it wasn't necessary. After a fresh hot application of my
wax-oil mix, it takes many hundreds of miles to get the first hints of a
squeak.

When that first squeak has happened on a tour, I've done fine by just
lubricating with the tiniest amount of ordinary oil. It gave me
hundreds more squeak-free miles. I carry about 2cc of oil in a tiny old
bottle from prescription eye drops. It's enough to get me coast to coast.


--
- Frank Krygowski
  #9  
Old April 8th 17, 07:44 PM posted to rec.bicycles.tech
Jeff Liebermann
external usenet poster
 
Posts: 4,018
Default Dirty word: Lube

On Sat, 8 Apr 2017 13:42:32 +1000, James
wrote:

I observed numerous others on the ride spending time applying lube to
their chain, mostly in the form of commercial and relatively expensive
wax in solvent preparations.


I prefer a more traditional formulation for my chain lube:

Fillet of a fenny snake,
In the cauldron boil and bake;
Eye of newt, and toe of frog,
Wool of bat, and tongue of dog,
Adder’s fork, and blind-worm’s sting,
Lizard’s leg, and howlet’s wing,
For a charm of powerful trouble,
Like a hell-broth boil and bubble.
Macbeth (IV, i, 14-15)

One side benefit of this formula is the smell acts as a good bicyle
theft deterrent.

--
Jeff Liebermann
150 Felker St #D
http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann AE6KS 831-336-2558
  #10  
Old April 8th 17, 08:51 PM posted to rec.bicycles.tech
Benderthe.evilrobot
external usenet poster
 
Posts: 128
Default Dirty word: Lube


"Frank Krygowski" wrote in message
news
On 4/8/2017 7:50 AM, John B. wrote:
On Sat, 8 Apr 2017 19:13:04 +1000, James
wrote:

On 08/04/17 17:51, John B. wrote:
On Sat, 8 Apr 2017 13:42:32 +1000, James
wrote:

A few weeks ago I applied my wax/oil chain lube, just before starting
a
cycling touring holiday that went for 9 days. We encountered 4 days
where it rained for a good part of that days ride. The average day
was
near 100km long. I've since added another 200km or so, and my chain
might be ready for another wax/oil application by now. Note that I
just
got home from an 80km ride and the chain doesn't squeak or sound dry.

I observed numerous others on the ride spending time applying lube to
their chain, mostly in the form of commercial and relatively expensive
wax in solvent preparations.

There was one other guy who used a wax based solution that he'd mixed
himself from a recipe he found online. It consists of paraffin wax,
paraffin oil and xylene solvent. He didn't need to make any chain
maintenance stops either.

The other guy's receipe? Was it for a lube that had to be applied hot
or was the xylene enough to allow it to be applied as a liquid and
then dry in place?


Apparently it could be liquified by immersing the plastic bottle it was
in, in hot water. I should think mine would do that too, but I also
think the penetration is much better if the chain is heated with the
wax.


Interesting. I use paraffin with about 20% beeswax added and some
molybdenum disulfide. The idea was that the added beeswax would make
the mix more adhesive, although now I'm not sure if it is necessary.
I've got an electric pot and I just chuck the chain in and turn the
pot on and leave it alone until I can be sure that the thermostat has
cycled a time or two so the chain reaches the temperature of the
melted wax mix.

As you say, a waxed chain just lasts and lasts and what I was thinking
about was some sort of liquid wax mix that would dry after application
so one could carry a small bottle in the tool bag. Then if things
started to squeak one could do something about it. Although I'm not
sure that is necessary as my waxed chains have never squeaked :-)


I've wished for a method of re-waxing on long tours, but I finally decided
it wasn't necessary. After a fresh hot application of my wax-oil mix, it
takes many hundreds of miles to get the first hints of a squeak.


Haven't bothered lubing the chain since Autumn - its bone dry now, but no
sign of any squeak.

The grease I used was molybdenum disulphide car wheel bearing grease - it
surface treats the moving surfaces with molybdenum.

I used to use the tub of wax chain treatment for motorcycle chains, you
place the chain on the surface and heat it on a stove till the wax melts -
it carries some risk of ruining the temper of the steel if you're not
careful to only get it as hot as it needs to be.


---
This email has been checked for viruses by AVG.
http://www.avg.com

 




Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
YOU TUBE- Bikin' Dirty/ Ridin' Dirty Floyd Landis cat6[_3_] Racing 2 March 1st 07 01:13 PM
To Lube Or Not To Lube Shifter Cables That is the Question! [email protected] Techniques 3 June 11th 06 01:24 AM
To Lube Or Not To Lube Shifter Cables That is the Question! MykalCrooks Techniques 1 June 9th 06 06:48 AM
To Lube Or Not To Lube Shifter Cables That is the Question! Qui si parla Campagnolo Techniques 0 June 8th 06 09:05 PM
To Lube Or Not To Lube Shifter Cables That is the Question! [email protected] Techniques 0 June 8th 06 08:50 PM


All times are GMT +1. The time now is 04:22 PM.


Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 CycleBanter.com.
The comments are property of their posters.